Military metallurgy

Military metallurgy

Bibliographic Details
Main Author:	Doig
Corporate Authors:	Institute of Materials, IOM Communications
Format:	Book
Language:	English
Published:	London IOM Communications 1998
Subjects:	Physical metallurgy

Similar Items

Mechanical Metallurgy : SI Metric Edition George E Dieter
by: Dieter
Published: (1988)

Extration metallurgy
by: Gilchrist
Published: (1980)

Metallurgy for engineer
by: Rollason
Published: (1973)

Metallurgy Fundamentals Daniel A. Brandt, J.C.Warner
by: Brandt
Published: (2009)

Extrative metallurgy of copper
by: Biswas
Published: (1976)

The language of mining and metallurgy in English
by: HALL
Published: (1978)

Engineering metallurgy Part II : Metallurgical process technology R.A. Higgins
by: Higgins
Published: (1977)

Kajian mengenai proses "powder metallurgy" / Razali Abdul Rahman Bakar
by: Abdul Rahman Bakar, Razali
Published: (1996)

Powder metallurgy process of the lower bearing blank / Muhamad Khairul Nordin, Saiful Anuar Mohamad and Saharuddin Seliman
by: Nordin, Muhamad Khairul, et al.
Published: (2002)

Enhancing properties of fe-cr-alumina composites prepared by powder metallurgy / Saidatulakmar Shamsuddin ... [et al.]
by: Jamaludin, Shamsul Baharin, et al.
Published: (2014)

The study of metal structures and their mechanical propertie
by: Wood 1907-
Published: (1971)

Keluli mikrostruktur dan sifat
by: Honeycombe
Published: (1997)

Thermal conductivity and wear behaviour of copper matrix composites reinforced with carbon nanotubes using powder metallurgy route / Nor Shamimi Shaari @ Md Noh
by: Shaari @ Md Noh, Nor Shamimi
Published: (2017)

Applied metallography
Published: (1986)

Understanding the Evolution of the Microstructure in Melt-Conditioned Direct-Chill Cast Al Alloys
by: A. K., Prasada Rao
Published: (2014)

Magnetic phase transition of mechanically alloyed single sample Co0.5Ni0.5Fe2O4
by: Zhi, Huang Low, et al.
Published: (2019)

The Effects of Gamma-Ray on the Mechanical Properties of Zr-Based Bulk Metallic Glass
by: L. H., Shah, et al.
Published: (2012)

Microstructural evaluation and corrosion behaviour of Fe-Cr-Ni-Mn-Co AND AI0.5-Fe-Cr-Ni-Mn-Co highentropy alloys (HEA) with elemental additions / Siti Sarah Mohd Pauzi
by: Mohd Pauzi, Siti Sarah
Published: (2018)

The role of tin and magnesium in assisting liquid phase sintering of aluminum (Al)
by: Jamal, Nur Ayuni Jamal, et al.
Published: (2018)

Effect of temperature on porosity of iron ore sinter with biochar derived from EFB
by: Purwanto, Hadi, et al.
Published: (2018)

Modeling of impact energy generated by free falling ball / Salina Budin, Aznifa Mahyam Zaharudin and Sugeng Priyanto
by: Budin, Salina, et al.
Published: (2009)

Investigation on phases transformation and mechanical properties of ductile iron by new heat treatment process / Mohd Faizul Idham Mohd Zulkipli
by: Mohd Zulkipli, Mohd Faizul Idham
Published: (2013)

Sacrificial anode cathodic protection of buried pipes / Wan Samsudin Wan Khalid
by: Wan Khalid, Wan Samsudin
Published: (2001)

Water quality parameters measurement at a former tin mining lake at Kampung Gajah, Perak / Mohd Hariffuddin Saad
by: Saad, Mohd Hariffuddin
Published: (2009)

Welding metullurgy Sindo Kou
by: Kou
Published: (2003)

Torsional springback analysis in thin tubes with non-linear work hardening / Vikas Kumar Choubey, Mayank Gangwar and J. P. Dwivedi
by: Choubey, Vikas Kumar, et al.
Published: (2010)

Dermal exposure monitoring: a study of chromium exposure on human skin / Fatahiah Ahmad
by: Ahmad, Fatahiah
Published: (2008)

A novel scheme for weld microstructure control using cryogenic cooling
by: Muhammed Olawale Hakeem, Amuda, et al.
Published: (2011)

Surface modification of mild steel using tungsten inert gas torch surface cladding
by: Dyuti, S., et al.
Published: (2010)

Grain refinement in ferritic stainless steel welds: The journey so far
by: Amuda, M.O.H., et al.
Published: (2010)

Effect of energy input on microstructure and hardness of TIG Welded AISI 430-Ferritic stainless steel
by: Amuda, M.O.H., et al.
Published: (2011)

Effects of processing parameters on microstructures and properties of TIG melted surface layer of steel
by: Mridha, Shahjahan, et al.
Published: (2011)

Formation of Ti-Al-N dispersed layer on steel surface by TIG melting in a reactive environment
by: Dyuti, Sarker, et al.
Published: (2011)

An overview of sensitization dynamics in ferritic stainless steel welds
by: Amuda, Muhammed Olawale Hakeem, et al.
Published: (2011)

Mechanism of grain refinement in ferritic stainless steel welds: between dendrite fragmentation, grain detachment and heterogeneous nucleation
by: Amuda , Muhammed Olawale Hakeem, et al.
Published: (2011)

Formation of TiN dispersed composite layer on steel surfaces by Titanium Powder Preplacement and TIG Surface Melting Processes
by: Mridha, Shahjahan, et al.
Published: (2011)

Wear behavior of modified surface layer produced by TIG melting of preplaced Ti powder in nitrogen environment
by: Mridha, Shahjahan, et al.
Published: (2011)

Structural and properties development of expanded austenite layers on AISI 316L after low temperature thermochemical treatments
by: Mridha, Shahjahan, et al.
Published: (2011)

Growth kinetics of hardened layers produced during nitriding in ammonia gas environments
by: Mridha, Shahjahan
Published: (2006)

Low temperature fluidized bed nitriding of austenitic stainless steel
by: Haruman, E., et al.
Published: (2006)

Cannot write session to /tmp/vufind_sessions/sess_uaf2jefrqe6rcr851q4mdq94ub