Optimization of Glutathione (GSH)production from selected Malaysian local fruits by ultrasonic method

Optimization of Glutathione (GSH)production from selected Malaysian local fruits by ultrasonic method

Bibliographic Details
Main Authors:	Jamal, Parveen, Arif, Afraha Baiti, Mirghani, Mohamed Elwathig Saeed, Hashim, Yumi Zuhanis Has-Yun
Format:	Conference or Workshop Item
Language:	English
Published:	2011
Subjects:	TA213 Engineering machinery, tools, and implements TP248.13 Biotechnology
Online Access:	http://irep.iium.edu.my/16861/ http://irep.iium.edu.my/16861/ http://irep.iium.edu.my/16861/1/IRIIE_2011_GSH.pdf

Similar Items

Optimization of Glutathione (GSH) from selected Malaysian local fruit by ultrasonic method
by: Arif, Afraha Baiti, et al.
Published: (2010)

Isolation of Reduced Glutathione (GSH) from local fruits by mechanical methods
by: Jamal, Parveen, et al.
Published: (2010)

Effect of homogenization in breaking protein-carotenoid complexes for releasing active compounds
by: Jamal, Parveen, et al.
Published: (2011)

Comparison studies of GSH isolation from several Malaysian local fruits by mechanical methods
by: Baiti, Arif Afraha, et al.
Published: (2010)

Optimization of process condition for isolation of Glutathione (GSH) from garlic bulbs
by: Hashim, Yumi Zuhanis Has-Yun, et al.
Published: (2011)

Manufacturing management: from basic machining to quality product
by: Adesta, Erry Yulian Triblas
Published: (2011)

Disturbance decoupled fault reconstruction using sliding mode observers
by: Kok, Yew Ng, et al.
Published: (2008)

Efficient dressing of the wheel in ELID grinding by controllable voltage with force feed back
by: Saleh, Tanveer, et al.
Published: (2010)

Optical switches for large core diameter optical fibers (POF & PCF)
by: Bhuiyan, Moinul, et al.
Published: (2004)

Study on machinability effect of surface roughness in milling kenaf fiber reinforced plastic composite (unidirectional) using response surface methodology
by: Harun, Azmi, et al.
Published: (2016)

The optimization study on the tool wear of carbide cutting tool during milling Carbon Fibre Reinforced (CFRP) using Response Surface Methodology (RSM)
by: Muhamad Khairussaleh, Nor Khairusshima, et al.
Published: (2018)

Optimization of milling carbon fibre reinforced plastic under chilled air machining
by: Muhamad Khairussaleh, Nor Khairusshima, et al.
Published: (2017)

Content comparative investigation on tool wear during end milling of AISI H13 steel with different tool path strategies
by: Adesta, Erry Yulian Triblas, et al.
Published: (2017)

Comparison of dry and cryogenic machining on chip formation and coefficient of friction in turning AISI 4340 alloy steel
by: A. Raof, Natasha, et al.
Published: (2014)

Optimization of milling carbon fiber reinforced plastic using RSM
by: Muhamad Khairussaleh, Nor Khairusshima, et al.
Published: (2017)

Material characterization of a doped triangular silicon nanowire using raman spectroscopy
by: Za'bah, Nor Farahidah, et al.
Published: (2018)

Micro-electro discharge machining of nonconductive zirconia ceramic: investigation of MRR and recast layer hardness
by: Banu, Asfana, et al.
Published: (2014)

Comparison studies of GSH isolation from several Malaysian local fruits by mechanical methods
by: Baiti, Arif Afraha, et al.
Published: (2010)

Comparison of alcohol free GSH production by ultrasonic and homogenizing method
by: Mohamed Salleh, Mohamad Ramlan, et al.
Published: (2008)

The study on the aspect ratio of Atomic Force Microscope (AFM) measurements for Triangular Silicon Nanowire
by: Za'bah, Nor Farahidah, et al.
Published: (2013)

Machinability study on milling kenaf fiber reinforced plastic composite materials using the design of experiments
by: Harun, Azmi, et al.
Published: (2018)

Study on the plasticiser type for biobased microcrystalline cellulose filled polylactic acid composite
by: Pang, Ming Meng, et al.
Published: (2018)

Isolation of GSH from Baker Yeast by Ultrasonic method
by: Mohamed Salleh, Mohamad Ramlan, et al.
Published: (2004)

Cancer detection using an electronic nose: A preliminary study on detection and discrimination of cancerous cells
by: Thriumani, Reena, et al.
Published: (2014)

Benchmarking the rapid prototyping machines (RPM) for education purpose using quality function deployment (QFD)
by: Wan Yusoff, Wan Ahmad Yusmawiza, et al.
Published: (2009)

Tetragonal and monoclinic phase transformation of ZTA-MgO ceramic cutting tool by machining process
by: Mohd Ali, Afifah, et al.
Published: (2017)

The application of rapid prototyping technology and FMEA quality tool in the development of automotive component
by: Wan Yusoff, Wan Ahmad Yusmawiza, et al.
Published: (2009)

Machining-induced grain refinement of AISI 4340 alloy steel under dry and cryogenic conditions
by: A. Raof, Natasha, et al.
Published: (2019)

Design improvements and fabrication of conveyor belt cleaner and washing system at Westports Malaysia
by: Ariff, Tasnim Firdaus, et al.
Published: (2013)

Artificial intelligence model to predict surface roughness of Ti-15-3 alloy in EDM process
by: Khan, Md. Ashikur Rahman, et al.
Published: (2011)

The effect of varying cutting speeds on tool wear during conventional and Ultrasonic Assisted Drilling (UAD) of Carbon Fibre Composite (CFC) and titanium alloy stacks
by: Dahnel, Aishah Najiah, et al.
Published: (2016)

Comparison studies among the methods used in isolating the GSH from baker yeast
by: Mohamed Salleh, Mohamad Ramlan, et al.
Published: (2005)

Process development for maximum Lycopene production from selected fruit waste
by: Jamal, Parveen, et al.
Published: (2015)

Process development for maximum lycopene production from selected fruit waste and its antioxidant and antiradical activity
by: Jamal, Parveen, et al.
Published: (2016)

Investigation of Allium Sativum L.(GARLIC) as an alternative source for glutathione and cysteine production
by: Mohd. Salleh, Hamzah
Published: (2013)

Pretreatment of sludge palm oil by ultrasonic energy for biodiesel production
by: Hayyan, Adeeb, et al.
Published: (2010)

Degradability index of novel locally isolated white rot fungi on agroindustrial wastes for production of animal feed.
by: Tijani, Ismaila, et al.
Published: (2009)

Carotenoid content in different locality of pumpkin (Cucurbita moschata) in Malaysia
by: Shahidan, Norshazila, et al.
Published: (2014)

Biodegradation potential and ligninolytic enzyme activity of two locally isolated Panus tigrinus strains on selected agro-industrial wastes
by: Tijani, Ruqayyah I. D., et al.
Published: (2013)

Quantification of total phenolic compounds in papaya (carica papaya) peels
by: Jamal, Parveen, et al.
Published: (2016)

Cannot write session to /tmp/vufind_sessions/sess_kh939006ak48h3f0usphd4donn