Tribological behavior of dual and triple particle size SiC reinforced Al0MMCs: a comparative study
Purpose- The aim is to study the tribological behavior of dual particle size (DPS)and triple particle size (TPS) SiC reinforced aluminium allloy based metal matrix composites - MMCs (Al/SiCp MMC)SiCp/Al-MMC). Design /methodology /approach- Al-MMCs were prepared using 20 vol% SiC reinforcement int...
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Emerald Group Publishing Limited
2008
|
| Subjects: | |
| Online Access: | http://irep.iium.edu.my/17379/ http://irep.iium.edu.my/17379/1/P26_2008.pdf |
| id |
iium-17379 |
|---|---|
| recordtype |
eprints |
| spelling |
iium-173792012-05-28T07:29:33Z http://irep.iium.edu.my/17379/ Tribological behavior of dual and triple particle size SiC reinforced Al0MMCs: a comparative study Maleque, Md. Abdul Karim, Md Rezaul TA401 Materials of engineering and construction TN600 Metallurgy Purpose- The aim is to study the tribological behavior of dual particle size (DPS)and triple particle size (TPS) SiC reinforced aluminium allloy based metal matrix composites - MMCs (Al/SiCp MMC)SiCp/Al-MMC). Design /methodology /approach- Al-MMCs were prepared using 20 vol% SiC reinforcement into aluminum metal matrix and developed using a stir casting process. Stir casting is a primary process of composite production whereby the reinforcement ingredient material is incorporated into the molten metal by stirring. The triple particle size (TPS) composite consist of SiC of three different sizes viz., coarse, intermediate and fine. The solution heat treatment was done on as cast (AC) composite at 540 0C for four hours followed by precipitation treatment. The wear test was carried out using a pin-on-disc type tribo-test machine under dry sliding condition. A mathematical analysis was also done for power factor values based on wear and friction results. The wear morphology of the damaged surface was also studied using optical microscope and scanning electron microscope (SEM) in this investigation. Findings- The test results showed that heat treated composite exhibited better wear resistance properties compared to as cast composite. It is anticipated that heat treatment could be an effective method of optimizing the wear resistance properties of the developed Al-MMC material. Emerald Group Publishing Limited 2008 Article PeerReviewed application/pdf en http://irep.iium.edu.my/17379/1/P26_2008.pdf Maleque, Md. Abdul and Karim, Md Rezaul (2008) Tribological behavior of dual and triple particle size SiC reinforced Al0MMCs: a comparative study. Industrial Lubrication and Tribology, 60 (4). pp. 189-194. ISSN 0036-8792 |
| repository_type |
Digital Repository |
| institution_category |
Local University |
| institution |
International Islamic University Malaysia |
| building |
IIUM Repository |
| collection |
Online Access |
| language |
English |
| topic |
TA401 Materials of engineering and construction TN600 Metallurgy |
| spellingShingle |
TA401 Materials of engineering and construction TN600 Metallurgy Maleque, Md. Abdul Karim, Md Rezaul Tribological behavior of dual and triple particle size SiC reinforced Al0MMCs: a comparative study |
| description |
Purpose- The aim is to study the tribological behavior of dual particle size (DPS)and triple particle size (TPS) SiC reinforced aluminium allloy based metal matrix composites - MMCs (Al/SiCp MMC)SiCp/Al-MMC).
Design /methodology /approach- Al-MMCs were prepared using 20 vol% SiC reinforcement into aluminum metal matrix and developed using a stir casting process. Stir casting is a primary process of composite production whereby the reinforcement ingredient material is incorporated into the molten metal by stirring. The triple particle size (TPS) composite consist of SiC of three different sizes viz., coarse, intermediate and fine. The solution heat treatment was done on as cast (AC) composite at 540 0C for four hours followed by precipitation treatment. The wear test was carried out using a pin-on-disc type tribo-test machine under dry sliding condition. A mathematical analysis was also done for power factor values based on wear and friction results. The wear morphology of the damaged surface was also studied using optical microscope and scanning electron microscope (SEM) in this investigation.
Findings- The test results showed that heat treated composite exhibited better wear resistance properties compared to as cast composite. It is anticipated that heat treatment could be an effective method of optimizing the wear resistance properties of the developed Al-MMC material.
|
| format |
Article |
| author |
Maleque, Md. Abdul Karim, Md Rezaul |
| author_facet |
Maleque, Md. Abdul Karim, Md Rezaul |
| author_sort |
Maleque, Md. Abdul |
| title |
Tribological behavior of dual and triple particle size SiC reinforced Al0MMCs: a comparative study |
| title_short |
Tribological behavior of dual and triple particle size SiC reinforced Al0MMCs: a comparative study |
| title_full |
Tribological behavior of dual and triple particle size SiC reinforced Al0MMCs: a comparative study |
| title_fullStr |
Tribological behavior of dual and triple particle size SiC reinforced Al0MMCs: a comparative study |
| title_full_unstemmed |
Tribological behavior of dual and triple particle size SiC reinforced Al0MMCs: a comparative study |
| title_sort |
tribological behavior of dual and triple particle size sic reinforced al0mmcs: a comparative study |
| publisher |
Emerald Group Publishing Limited |
| publishDate |
2008 |
| url |
http://irep.iium.edu.my/17379/ http://irep.iium.edu.my/17379/1/P26_2008.pdf |
| first_indexed |
2023-09-18T20:26:13Z |
| last_indexed |
2023-09-18T20:26:13Z |
| _version_ |
1777408434517311488 |