Pin type reconfigurable clamping ability evaluation for setup-free technology

Pin type reconfigurable clamping ability evaluation for setup-free technology

Bibliographic Details
Main Authors:	Afzeri, Afzeri, Sutjipto, Agus Geter Edy, Nurul Amin, A.K.M
Format:	Book Chapter
Language:	English
Published:	IIUM Press 2011
Subjects:	TA Engineering (General). Civil engineering (General)
Online Access:	http://irep.iium.edu.my/17831/ http://irep.iium.edu.my/17831/1/Chapter_64.pdf

Similar Items

The use of scanning electron microscope in evaluating insulation property
by: Sutjipto, Agus Geter Edy, et al.
Published: (2011)

Design and simulation of Clamped-Clamped and Clamped-Free resonators
by: Zainuddin, Ahmad Anwar, et al.
Published: (2013)

Types of damage in pin-loaded aluminum plate and other material
by: Mohammad Afifi, Mohammad
Published: (2009)

Novel nuclear technology for controlled production of n-type semiconductor
by: Sutjipto, Agus Geter Edy, et al.
Published: (2010)

A maximum power point tracking for Photovoltaic system using temperature compensator method
by: Muhida, Riza, et al.
Published: (2011)

Recent nanofabrication of silicon dioxide on silicon wafer using AFM operated at low temperature
by: Sutjipto, Agus Geter Edy, et al.
Published: (2011)

Experimental setup and biomechanics measurement of knee pads
by: Sakinah, Muhamad Hisham
Published: (2013)

Effect of clamping distance and voltage on weldability of dissimilar welding
by: Veyolla, Jaffrey
Published: (2013)

Overview of Radio Frequency Microelectromechanical systems reconfigurable antennas
by: Alam, A. H. M. Zahirul
Published: (2011)

Development of neck dummy for head impact (soccer heading) experimental setup
by: Abdul Rahim, Zulkufli Ahmad
Published: (2013)

Remote operation of CNC milling through virtual simulation and remote dekstop interface
by: , Afzeri, et al.
Published: (2009)

An RF switching circuit using PIN diode for a 2.4GHz frequency reconfigurable antenna
by: Nurul Hazlina, Noordin, et al.
Published: (2018)

Relationship between average slope of textured substrate and poly-Si thin film solar cells performance
by: Muhida, Riza, et al.
Published: (2009)

Thin film of indium tin oxide and its deposition technology deposition
by: Sutjipto, Agus Geter Edy, et al.
Published: (2011)

Investigation on the shear joints failure with tensile loading for aluminum pins
by: Mohd Firdaus, Mohd Zaid
Published: (2009)

Selection of materials and design specification for hip oint prosthesis
by: Sopyan, Iis, et al.
Published: (2011)

Setup latency analysis of CAPWAP Centralized WLAN Network
by: Balfaqih, Mohammed, et al.
Published: (2012)

Damage detection based on the natural frequency shifting of a clamped rectangular plate model
by: Hilmy, Irfan, et al.
Published: (2015)

BMM87 bearing load on a brass pin with aluminium plates
by: Mohd Nur Hilmi, Mohd Nazih
Published: (2012)

The possibility of utilizing scanning electron microscope for materials characterization
by: Sutjipto, Agus Geter Edy
Published: (2011)

Surface breakdown property of SiO2 added MgO under electron bombardment in vacuum: a promising materials for spacecraft and space station
by: Sutjipto, Agus Geter Edy
Published: (2007)

The effect of CaO addition on the microstructural, mechanical and dielectric properties of pure MgO ceramic
by: Sutjipto, Agus Geter Edy
Published: (2007)

Experimental & numerical study on sheet metal lateral bending with fixed and pinned ends
by: Norazlianie, Sazali
Published: (2012)

Multi-Axial Clamp Assemble
by: Zamzuri, Hamedon
Published: (2016)

Neutron transmutation doped of silicon under Cf-252 isotopic neutron bombardment
by: Yahya, Roslan, et al.
Published: (2009)

3D reconfigurable antenna
by: Abdul Malek, Norun, et al.
Published: (2010)

Study of the effect of different curing setups on mechanical properties of low cost composite structures
by: Syed Muhammad, Kashif, et al.
Published: (2013)

Fabrication of on/off magnetic clamp for welding process
by: Mohammad Izzat, Junid
Published: (2013)

Experimental setup of pipe whip impact
by: Shah, Qasim Hussain, et al.
Published: (2011)

Simulation setup of pipe whip impact
by: Shah, Qasim Hussain, et al.
Published: (2011)

Green technology of energy-efficient materials up to 70% for plasma display panel
by: Sutjipto, Agus Geter Edy, et al.
Published: (2010)

A simulation method to find the optimal design of photovoltaic home system in Malaysia, case study: a building integrated photovoltaic in Putra Jaya
by: Muhida, Riza, et al.
Published: (2009)

A simulation method to find the optimal design of photovoltaic home system in Malaysia, case study: a building integrated photovoltaic in Putra Jaya
by: Muhida, Riza, et al.
Published: (2010)

Development of inert ceramic for industrial application based on ternary phase diagram of potassiun oxide-aluminum oxide-silicon dioxide
by: Sutjipto, Agus Geter Edy, et al.
Published: (2019)

Green nanotechnology using SEM and AFM
by: Sutjipto, Agus Geter Edy, et al.
Published: (2011)

Microstructure and mechanical properties of neutron transmutation doped silicon under Cf-252 Neutron Bombardment
by: Sutjipto, Agus Geter Edy, et al.
Published: (2011)

Introduction to probability safety assessment of nuclear power plant
by: Sutjipto, Agus Geter Edy, et al.
Published: (2011)

Virtual simulation and remote desktop interface for CNC milling operation
by: Afzeri, Afzeri, et al.
Published: (2011)

The use of SEM to investigate the effect of an electron beam on the optically-visible flashover treeing of MgO ceramic
by: Sutjipto, Agus Geter Edy, et al.
Published: (2007)

Reconfigurable patch antenna by RF MEMS switches
by: Alam, A. H. M. Zahirul, et al.
Published: (2009)

Cannot write session to /tmp/vufind_sessions/sess_480qdofqi0ia3j2d7gp1gk8v63