Workpiece preheating approach to reduce chatter and improve machinability of titanium alloy- Ti6A14V

Workpiece preheating approach to reduce chatter and improve machinability of titanium alloy- Ti6A14V

Bibliographic Details
Main Authors:	Nurul Amin, A.K.M, Kamaruddin, K., Abdelgadir, M.
Format:	Book Chapter
Language:	English
Published:	IIUM Press 2011
Subjects:	TA Engineering (General). Civil engineering (General)
Online Access:	http://irep.iium.edu.my/17834/ http://irep.iium.edu.my/17834/1/Chapter_65.pdf

Similar Items

Influence of workpiece preheating on chatter and machinability of Titanium alloy - Ti6Al4V
by: Amin, A. K. M. Nurul, et al.
Published: (2011)

Some aspects of improved machinability in preheated machining of Titanium alloy Ti-6Al-4V
by: Amin, A. K. M. Nurul, et al.
Published: (2011)

Improved machinability of Titanium alloy Ti-6Al-4V: implementation of preheated machining
by: Ginta, Turnad Lenggo, et al.
Published: (2010)

Enhancement of machinability by workpiece preheating in end milling of Ti-6Al-4V
by: Hossain, Muhammad Ishtiyaq, et al.
Published: (2008)

Application of permanent electromagnet for chatter control in end milling of Titanium alloy - Ti6Al4V
by: Amin, A. K. M. Nurul, et al.
Published: (2011)

Improved tool life in end milling Ti-6A1-4V through workpiece preheating
by: Ginta, Turnad Lenggo, et al.
Published: (2009)

Surface roughness models for end milling titanium alloy TI-6AL-4V under room temperature and preheated machining
by: Ginta, Turnad Lenggo, et al.
Published: (2009)

Surface roughness and surface integrity of end milled titanium alloy TI-6AL-4V at room temperature and preheated machining
by: Ginta, Turnad Lenggo, et al.
Published: (2009)

Chatter suppression in end milling of Titanium alloy Ti6Al4V applying permanent magnet clamped adjacent to the workpiece
by: Amin, A. K. M. Nurul, et al.
Published: (2011)

Machinability improvement in end milling of Titanium Alloy Ti-6Al-4V through preheating
by: Amin, A. K. M. Nurul, et al.
Published: (2011)

Effects of workpiece preheating on surface roughness, chatter and tool performance during end milling of hardened steel D2
by: Amin, A. K. M. Nurul, et al.
Published: (2008)

Improved tool life in end milling ti-6al-4v through workpiece preheating
by: Ginta , Turnad L., et al.
Published: (2009)

Application of permanent magnets for chatter control in end milling of titanium alloy Ti-6Al-4V
by: Sulaiman, Syidatul Akma, et al.
Published: (2012)

Influence of magnetic field on reduction chatter and of surface roughness in end milling of Titanium Alloy - Ti-6Al-4V
by: Sulaiman, Syidatul Akma, et al.
Published: (2012)

Influence of chip serration frequency on chatter formation during end milling of Ti6Al4V
by: Patwari, Muhammed Anayet Ullah, et al.
Published: (2011)

Optimization of surface roughness in high speed end milling of Titanium alloy Ti-6Al-4V under dry conditions
by: Amin, A. K. M. Nurul, et al.
Published: (2011)

Modeling for surface roughness in end-milling of Titanium alloy Ti-6Al-4V using uncoated WC-Co inserts
by: Amin, A. K. M. Nurul, et al.
Published: (2011)

Study of Mechanical Properties on Thick Titanium Alloy (Ti - 6Al- 4V) Multi-Passes Weld
by: Ahmed, Yassin Mustafa, et al.
Published: (2015)

Tool life prediction by response surface methodology in end milling titanium alloy Ti-6A1-4V using uncoated WC-Co inserts
by: Turnad L., Ginta, et al.
Published: (2009)

Modeling for surface roughness in end-milling of titanium alloy Ti-6AI-4V using uncoated WC-Co and PCD Inserts
by: Ginta, Turnad Lenggo, et al.
Published: (2007)

Tool Life Prediction by Response Surface Methodology for End Milling Titanium Alloy Ti-6Al-4V Using PCD Inserts
by: Ginta , Turnad L., et al.
Published: (2008)

The performance of uncoated tungsten carbide insert in end milling titanium alloy Ti-6Al 4V through work piece preheating
by: Ginta, Turnad Lenggo, et al.
Published: (2009)

Induction heat assisted end milling of Inconel 718 and Ti6AI4V alloys: a comparative assessment of Machinability in terms of chatter, surface roughness and tool performance
by: Amin, A. K. M. Nurul, et al.
Published: (2013)

Machinability improvement by workpiece preheating during end milling AISI H13 hardened steel
by: Mokhtar, Suhaily, et al.
Published: (2011)

Tool life prediction by response surface methodology for end milling titanium alloy ti–6al–4v using uncoated carbide inserts
by: Ginta, Turnad Lenggo, et al.
Published: (2007)

Effects of workpiece preheating on surface roughness, chatter and tool performance during end milling of hardened steel D2
by: Amin, A. K. M. Nurul, et al.
Published: (2008)

Comparison of surface roughness in end milling of titanium alloy Ti-6Al-4V using uncoated WC-Co and PCD inserts through generation of models
by: Ginta, Turnad Lenggo, et al.
Published: (2011)

Regenerative Chatter in End Milling on Mould Aluminum Alloys
by: N. M. Zuki, N. M., et al.
Published: (2008)

Effect of carburization process on adhesion strength of ti carbide layer on titanium alloy substrate
by: Sudin, Izman, et al.
Published: (2011)

Single objective optimization of EDM machining on titanium workpiece using Taguchi method
by: Wan Mohd Ariff, Wan Azli
Published: (2012)

The effect of preheating of work on chatter during end milling of medium carbon steel performed on a Vertical Machining Center (VMC)
by: Amin, A. K. M. Nurul, et al.
Published: (2003)

Surface integrity in end milling titanium alloy Ti6Al4V under heat assisted machining
by: Ginta, Turnad Lenggo, et al.
Published: (2013)

High speed machining of titanium alloy, Ti6Al4V to achieve nano level surface roughness
by: Amin, A. K. M. Nurul, et al.
Published: (2012)

Electrode Wear Rate of Graphite Electrodes during Electrical Discharge Machining Processes on Titanium Alloy Ti-5Al-2.5Sn
by: Khan, Md. Ashikur Rahman, et al.
Published: (2014)

Chatter control in induction heat assisted end milling: to improve machinability of stainless steel and medium carbon steels
by: Amin, A. K. M. Nurul, et al.
Published: (2013)

Artificial Intelligent Approach for Machining Titanium Alloy in a Nonconventional Process
by: Khan, Md. Ashikur Rahman, et al.
Published: (2013)

Investigation of chatter arising during end milling operation on VMC and quality of machined surface
by: Nurul Amin, A.K.M, et al.
Published: (2011)

Tool life assessment in end milling titanium alloy (Ti-6Al-4V) using PCD inserts
by: Turnad L., Ginta, et al.
Published: (2008)

Optimization of Multi-layer Welding of Titanium Alloy
by: Yasin Mustafa, Ahmed, et al.
Published: (2015)

Characterization of titanium aluminide alloys synthesized by mechanical alloying technique
by: Rozman, Mohd Tahar
Published: (2015)

Cannot write session to /tmp/vufind_sessions/sess_j6qi9prstd5h250hmu2faq2hes