Laser nitriding of titanium

Laser nitriding of titanium

Bibliographic Details
Main Author:	Mridha, Shahjahan
Format:	Book Chapter
Language:	English
Published:	IIUM Press 2011
Subjects:	TA Engineering (General). Civil engineering (General) TP Chemical technology
Online Access:	http://irep.iium.edu.my/19034/ http://irep.iium.edu.my/19034/ http://irep.iium.edu.my/19034/1/Chapter_7.pdf

Similar Items

Composite coating on titanium alloy using high power laser
by: Mridha, Shahjahan
Published: (2011)

Titanium nitride layer formation by TIG surface melting in a reactive environment
by: Mridha, Shahjahan
Published: (2005)

Experimental investigation of tribological properties of laser textured tungsten doped diamond like carbon coating under dry sliding conditions at various loads
by: Arslan, A., et al.
Published: (2019)

Water absorption of TPNR reinforce short carbon fibre composite
by: Anuar, Hazleen, et al.
Published: (2011)

Fabrication of biomass pellet from mesocarp fiber
by: Halim, Zahurin, et al.
Published: (2011)

Screening of Factors Influencing Dyeing Uptake Exhaustion of Betacyanin Extracted onto Spun Silk using Fractional Factorial Design
by: Norasiha, Hamid, et al.
Published: (2016)

Sub-surface mechanical properties and sub-surface creep behavior of wood-plastic composites reinforced by organoclay
by: Yadav, Sumit Manohar, et al.
Published: (2019)

Effects of Purification on the Hydrogen Production in Biomass Gasification Process
by: Noor Asma Fazli, Abdul Samad, et al.
Published: (2017)

Mitigation of biofouling by reducing biofilm formation and extracellular polymeric substances
by: Muhammad Faisal, Siddiqui, et al.
Published: (2014)

Influence of operating parameters on biomass conversion under suband supercritical water conditions
by: Md Isa, Khairuddin, et al.
Published: (2017)

Fundamental study of waste oil potential as base oil alternative in grease formulation
by: N. Suhaila, A. Japar, et al.
Published: (2018)

Batch study on the removal of mercury (II) ion from industrial wastewater using activated palm oil fuel ash
by: Kamaliah, Abdul Samad, et al.
Published: (2019)

Control of Biodegradability in a Natural Fibre based Nanocomposite as a Function of Impregnated Copper Nanoparticle
by: Chowdhury, M. N. K., et al.
Published: (2016)

Effect of Visible Light on Catalytic Hydrolysis of P-nitrophenyl Palmitate by the Pseudomonas Cepacia Lipase Immobilized on Sol–Gel Support
by: Ponnarasy, Ganasen, et al.
Published: (2014)

Professor Dato' Dr. Rosli shared knowledge on the function of ultrasound in engineering
by: UMP, PNC

Non-dimensionalization and Three-dimensional Flow Regime Map for Fluidization Analyses
by: Azri, Alias, et al.
Published: (2014)

Hetero-structure CdS-CuFe2O4 as an efficient visible light active photocatalyst for photoelectrochemical reduction of CO2 to methanol
by: Tarek, Mostafa, et al.
Published: (2019)

Photoelectrocatalytic Reduction of Carbon Dioxide to Methanol Using CuFe2O4 Modified with Graphene Oxide under Visible Light Irradiation
by: Karim, Kaykobad Md. Rezaul, et al.
Published: (2018)

Thermal and mechanical properties of bamboo fiber reinforced composites
by: Chin, Siew Choo, et al.
Published: (2019)

Investigation on Electrically Conductive Aggregates as Grounding Compound Produced by Marconite
by: Mohd Yuhyi, Mohd Tadza, et al.
Published: (2019)

Heat and mass transfer analysis on flow of Williamson nanofluid with thermal and velocity slips: Buongiorno model
by: Kho, Yap Bing, et al.
Published: (2019)

Biobutanol production from oil palm frond juice in 2 L stirred tank bioreactor with in situ gas stripping recovery
by: N., Masngut, et al.
Published: (2019)

Continuous Bioethanol Production Using Uncontrolled Process in a Laboratory Scale of Integrated Aerobic-Anaerobic Baffled Reactor
by: Margono, Margono, et al.
Published: (2019)

Mesophilic and Thermophilic Biomethane Production by Co-Digesting Pretreated Petrochemical Wastewater With Beef and Dairy Cattle Manure
by: Siddique, Md. Nurul Islam, et al.
Published: (2014)

Feasibility Analysis of Anaerobic Co-Digestion of Activated Manure and Petrochemical Wastewater in Kuantan (Malaysia)
by: Siddique, Md. Nurul Islam, et al.
Published: (2015)

Effect of co-doping process on topography, optical and electrical properties of ZnO nanostructured
by: Mohamed, Ruziana, et al.
Published: (2018)

Wear of nitride coating produced by Ti-Al Melt synthesis in nitrogen environment
by: Mridha, Shahjahan
Published: (2011)

Indicator microorganisms : detection of Coliform and Escherichia Coli
by: Abdul Karim, Mohamed Ismail
Published: (2011)

SS 316L/HA composite via powder injection moulding: Mechanical and physical properties
by: Johari, N. A., et al.
Published: (2019)

Size-dependent corrosion behavior of graphene oxide coating
by: Nurul Huda, Abu Bakar, et al.
Published: (2019)

Effect of compaction pressure of green body and heating current on photoluminescence property of ZnO crystal grown by electric current heating method
by: Sutjipto, Agus Geter Edy, et al.
Published: (2018)

Retrofits of a Partial Combustion Lance using a Computational Fluid Dynamics
by: Law, Woon Phui, et al.
Published: (2015)

A review on carbon membranes for hydrogen purification
by: Norazlianie, Sazali, et al.
Published: (2020)

Application of Polyethylene Glycol Immobilized Clostridium sp. LS2 for Continuous Hydrogen Production From Palm Oil Mill Effluent in Upflow Anaerobic Sludge Blanket Reactor
by: Singh, Lakhveer, et al.
Published: (2013)

Biohydrogen Production from Palm Oil Mill Effluent Using Immobilized Clostridium Butyricum EB6 in Polyethylene Glycol
by: Singh, Lakhveer, et al.
Published: (2013)

Fresh and hardened properties of palm oil clinker lightweight aggregate concrete incorporating Nano-palm oil fuel ash
by: Hamada, Hussein M., et al.
Published: (2019)

Enhanced biogas production from municipal solid waste via co-digestion with sewage sludge and metabolic pathway analysis
by: Ghosh, P., et al.
Published: (2020)

Waste cooking oil as bio asphalt binder : a critical review
by: Putra Jaya, Ramadhansyah, et al.
Published: (2019)

Improving the mechanical and thermal properties of chlorinated poly(vinyl chloride) by incorporating modified CaCO3 nanoparticles as a filler
by: Abd El-Hakim, Abou El fettouh Abd El Moneim, et al.
Published: (2019)

Oxidative induction and performance of oil palm fiber reinforced polypropylene composites - effects of coupling agent and UV stabilizer
by: Akindoyo, John Olabode, et al.
Published: (2019)

Cannot write session to /tmp/vufind_sessions/sess_muj89hvh8n6728o7ecsckdo21c