Analysis of lightweight structural tubes for crashworthy car body

Analysis of lightweight structural tubes for crashworthy car body

Bibliographic Details
Main Authors:	Abdullah, Kassim Abdulrahman, Roslan, Zahra
Format:	Book Chapter
Language:	English
Published:	IIUM Press 2011
Subjects:	TJ Mechanical engineering and machinery TL1 Motor vehicles
Online Access:	http://irep.iium.edu.my/19823/ http://irep.iium.edu.my/19823/ http://irep.iium.edu.my/19823/1/Chapter_10.pdf

Similar Items

Structural analysis of the frontal part of a local car model for crashworthiness
by: Abdullah, Kassim Abdulrahman, et al.
Published: (2013)

Design and fabrication of the second generation IIUM buggy car
by: Abdullah, Kassim Abdulrahman
Published: (2012)

Buckling and crush analysis of light weight structure
by: Abdullah, Kassim Abdulrahman, et al.
Published: (2011)

Effect of cross sectional shape on the energy absorbing characteristics of a tube under quasi-static loading
by: Syed Mohamed Ali, Jaffar, et al.
Published: (2013)

Design and fabrication of the testing model of the vehicle structure test system
by: Abdullah, Kassim Abdulrahman, et al.
Published: (2011)

Comparison of crash behaviour of initial and updated finite element model of car crash box in crashworthiness analysis
by: N. A. Z., Abdullah, et al.
Published: (2019)

Development and fieldwork trial of autonomous surface vehicles for bathymetry mapping
by: Naing, Lwinthein, et al.
Published: (2018)

Frame body structure for solar car
by: Muhamad Izwan, Sunawan
Published: (2010)

Enhancing magnetic particle testing of automotive parts
by: Hrairi, Meftah, et al.
Published: (2011)

Liquid sloshing
by: Hussain Shah, Qasim, et al.
Published: (2011)

A study of an aftermarket voltage stabilizer for its performance and emission on passengers vehicle
by: Mohiuddin, A. K. M., et al.
Published: (2011)

Automotive catalytic converters : current status and some future perspectives
by: Mohiuddin, A. K. M., et al.
Published: (2011)

3-Cylinder gasoline direct injection as opposed to 4-cylinder multi-port fuel injection for lower fuel consumption and NOX emission
by: Mohiuddin, A. K. M., et al.
Published: (2011)

Investigation of spark ignition multipoint engine using water addition - Part II: performance and emission
by: Mohiuddin, A. K. M., et al.
Published: (2011)

Performance investigation of energy efficient hybrid engine towards green technology
by: Rahman, Mohammed Ataur
Published: (2011)

Production of aluminum-silicon carbide composites using powder metallurgy at sintering temperatures above the aluminum melting point part II
by: Nimir, Yassin Lutfi Mahmud
Published: (2011)

Comparison between composites reinforced with natural and synthetic fibers : Part I
by: Nimir, Yassin Lutfi Mahmud
Published: (2011)

Comparison between composites reinforced with natural fibres and synthetic fibres Part II
by: Nimir, Yassin Lutfi Mahmud
Published: (2011)

Development of automatic magnetic particle system for automotive parts inspection
by: Hrairi, Meftah, et al.
Published: (2011)

Performance of an automatic magnetic particle inspection of automotive parts
by: Hrairi, Meftah, et al.
Published: (2011)

Film cooling of turbine blades
by: Hoda, Asif
Published: (2011)

Reynolds averaged navier stokes (RANS) simulation
by: Hoda, Asif
Published: (2011)

Direct numerical simulation (DNS) and large eddy simulation (LES)
by: Hoda, Asif
Published: (2011)

Numerical simulation of complex turbulent flows
by: Hoda, Asif
Published: (2011)

Upper body structure design for solar car
by: Muhammad Syafiq, Ayob
Published: (2010)

Automatic car identification system
by: Khalifa, Othman Omran, et al.
Published: (2012)

Design analysis of laminated composite ladder chassis frame of light truck
by: Abdullah, Kassim Abdulrahman, et al.
Published: (2011)

Design and development of UrbanConcept car
by: Rahman, Mohammed Ataur
Published: (2010)

Design and analysis of the solar car body
by: Yusri, Yusof
Published: (2010)

Sonic Under Expanded Flow Control With Micro Jets
by: Syed, Syed Ashfaq, et al.
Published: (2013)

Engine noise: An overview on current research trends
by: Hanouf, Zahir, et al.
Published: (2007)

A comparative analysis of LQR and fuzzy logic controller for active suspension using half car model
by: Hasbullah, Faried, et al.
Published: (2010)

Intelligent electromagnetic actuated CVT system for passenger car
by: Rahman, Mohammed Ataur, et al.
Published: (2011)

Transient and steady state dynamic analysis of passive and semi-active suspension systems using half-car model
by: Faris, Waleed Fekry, et al.
Published: (2009)

Design analysis of exterior car body part
by: Bastian Wibar, Momang
Published: (2013)

An experiment on electromechanical power steering (EPS) system of a CAR
by: Akhtaruzzaman, Md., et al.
Published: (2010)

Design and development of an automatic car door opening and locking system
by: Rahman, Mohammed Ataur, et al.
Published: (2008)

Study on the effect of window opening on the drag characteristics of a car
by: Syed Mohamed Ali, Jaffar, et al.
Published: (2014)

The investigation of a ride quality of nonlinear half-car model
by: Darsivan, Fadly Jashi
Published: (2016)

Hybrid engine powered city car: fuzzy controlled approach
by: Rahman, Mohammed Ataur, et al.
Published: (2017)

Cannot write session to /tmp/vufind_sessions/sess_9tm2sn5jhocoqp5gt14qjkug46