Turbulence model for axial mixing impeller in unbaffled vessel

Turbulence model for axial mixing impeller in unbaffled vessel

Bibliographic Details
Main Authors:	Mohiuddin, A. K. M., Adeyemi, Nabeel A., Husaini, Muhamad
Format:	Book Chapter
Language:	English
Published:	IIUM Press 2011
Subjects:	TJ Mechanical engineering and machinery
Online Access:	http://irep.iium.edu.my/20065/ http://irep.iium.edu.my/20065/ http://irep.iium.edu.my/20065/1/turbulence_model_for_axial_-_C15.pdf

Similar Items

CFD simulation of biodiesel production using mixed flow impeller in baffled and unbaffled stirred vessel
by: Adeyemi, Nabeel A., et al.
Published: (2012)

Numerical modelling of mixed flow impeller in stirred vessel
by: Mohiuddin, A. K. M., et al.
Published: (2012)

Flow characteristic of mixing impeller for liquid-liquid mixing
by: Mohiuddin, A. K. M., et al.
Published: (2011)

Mixed-flow impeller characteristics in baffled mixing tank
by: Adeyemi, Nabeel A., et al.
Published: (2012)

Alternative mixing strategy for biodiesel production: mixed flow impeller characterization
by: Mohiuddin, A. K. M., et al.
Published: (2011)

Multi-Axial Clamp Assemble
by: Zamzuri, Hamedon
Published: (2016)

Correlations Between Axial and Oblique Loaded Column
by: Salwani, Mohd Salleh, et al.
Published: (2016)

Cylindrical shell buckling under axial compression load
by: Shah, Qasim Hussain, et al.
Published: (2011)

Modelling of non-premixed turbulent combustion of hydrogen using conditional moment closure method
by: M. M., Noor, et al.
Published: (2012)

Study of Random Particle Interactions for Analysis of Diffusion Lengths in Turbulent Combustion Modelling
by: M. M., Noor, et al.
Published: (2011)

Tri-axial Time-frequency Analysis for Tool Failures Detection in Deep Twist Drilling Process
by: M. H. S., Harun, et al.
Published: (2016)

Development of ironless coreless axial flux permanent magnet generator
by: Yap, Wee Leong
Published: (2016)

Development Of A High Pressure Chamber For Spray Vessels
by: Amirruddin, Abdul Kadir, et al.
Published: (2010)

Performance of sand cement block under axial load with different eccentricity
by: Amirul Fazlan, Ramli
Published: (2011)

Optimization of mixed-model assembly line balancing problem with resource constraints
by: M. M., Razali, et al.
Published: (2017)

Analysis of Tri-axial Force and Vibration Sensors for Detection of Failure Criterion in Deep Twist Drilling Process
by: Mohd Hazwan Syafiq , Harun, et al.
Published: (2017)

The Trends of Research in Compressed Natural Gas (CNG) Pressure Vessel Technology: An Overview
by: R. A., Bakar, et al.
Published: (2008)

Design and Simulate Mixing of Compressed Natural Gas with Air in a Mixing Device
by: K., Kadirgama, et al.
Published: (2008)

The Effect of Cross Sectional Area of Tube on Friction Factor and Heat Transfer Nanofluid Turbulent Flow
by: K., Kadirgama, et al.
Published: (2013)

Load carrying capability of liquid filled cylindrical shell structures under axial compression
by: Hussain Shah, Qasim, et al.
Published: (2011)

Numerical Study on Turbulent Forced Convective Heat Transfer Using Nanofluids TiO2 in an Automotive Cooling System
by: Adnan M., Husein, et al.
Published: (2017)

Simulation Study of Turbulent Convective Heat Transfer Enhancement in Heated Tube Flow Using Tio2-Water Nanofluid
by: M. Hussein, Adnan, et al.
Published: (2013)

Theoretical Analysis of Heat Transfer and Friction Factor for Turbulent Flow of Nanofluids through Pipes
by: K. V., Sharma, et al.
Published: (2016)

Application of CNT nanofluids in a turbulent flow heat exchanger
by: Walvekar, Rashmi, et al.
Published: (2015)

Multiobjective Fuzzy Mixed Assembly Line Sequencing Optimization Model
by: Tahriri, Farzad, et al.
Published: (2014)

Improvement of MRR and surface roughness during electrical discharge machining (EDM) using aluminum oxide powder mixed dielectric fluid
by: Khan, Ahsan Ali, et al.
Published: (2018)

Numerical simulation of complex turbulent flows
by: Hoda, Asif
Published: (2011)

Augmentation of Turbulent Flow Heat Transfer in A Horizontal Tube with Varying Width Twisted Tape Inserts
by: Sarad, S. Naga, et al.
Published: (2012)

Nanofluids Heat Transfer Enhancement Through Straight Channel Under Turbulent Flow
by: M. Kh., Abdolbaqi, et al.
Published: (2015)

Numerical simulation and validation of high-speed turbulent and chemically-reacting flows
by: Kamel, Mohammed, et al.
Published: (2015)

Numerical Analysis of Experimental Turbulent Forced Convection Heat Transfer for Nanofluid Flow in a Tube
by: K. V., Sharma, et al.
Published: (2016)

Turbulent Forced Convection Heat Transfer of Nanofluids with Twisted Tape Insert in a Plain Tube
by: Azmi, W. H., et al.
Published: (2013)

Computational Analysis of a High-Lift and Low Reynolds Number Airfoil at Turbulent Atmospheric Conditions
by: Islam, Mazharul, et al.
Published: (2009)

Experimental Determination of Turbulent Forced Convection Heat Transfer and Friction Factor with SiO2 Nanofluid
by: Azmi, W. H., et al.
Published: (2013)

Wrinkling prediction in deep drawing metal forming : kinematic hardening model versus mixed hardening model
by: Wan Iryana, Wan Md Nor
Published: (2017)

Numerical simulation of supersonic and turbulent combustion with trans-verse sonic fuel injection
by: Kamel, Mohammed, et al.
Published: (2015)

Markov Chain Modelling of Reliability Analysis and Prediction under Mixed Mode Loading
by: Salvinder, Singh, et al.
Published: (2015)

Simulation Of Mixed Convective Heat Transfer Using Lattice Boltzmann Method
by: A. R. M., Rosdzimin, et al.
Published: (2010)

Effect of tapered angle of a conical nose indenter on the energy absorbing variation of a copper pipe subjected to axial crushing
by: Shah, Qasim Hussain, et al.
Published: (2011)

Experimental analysis and comparison of performance characteristics of catalytic converters
by: Mohiuddin, A. K. M.
Published: (2011)

Cannot write session to /tmp/vufind_sessions/sess_ngqc10p8q8j4h0c91oesvfl3dg