Materials for bicycle frame system - a case study on the development of selection method

The selection of the correct materials for a design is a key step in the process because it is the crucial decision that links computer calculations and lines on an engineering drawing with a working design. Materials, and manufacturing processes which convert the material into a useful part, underp...

Full description

Bibliographic Details
Main Authors:	Maleque, Md. Abdul, Sarker, Dyuti
Format:	Conference or Workshop Item
Language:	English
Published:	2010
Subjects:	TA Engineering (General). Civil engineering (General) TN Mining engineering. Metallurgy
Online Access:	http://irep.iium.edu.my/2019/ http://irep.iium.edu.my/2019/1/Proc_SPPM2010.pdf

id	iium-2019
recordtype	eprints
spelling	iium-20192011-09-14T08:38:57Z http://irep.iium.edu.my/2019/ Materials for bicycle frame system - a case study on the development of selection method Maleque, Md. Abdul Sarker, Dyuti TA Engineering (General). Civil engineering (General) TN Mining engineering. Metallurgy The selection of the correct materials for a design is a key step in the process because it is the crucial decision that links computer calculations and lines on an engineering drawing with a working design. Materials, and manufacturing processes which convert the material into a useful part, underpin all of engineering design. In the relation of design stages and process selection with material selection, screening and ranking are two vital steps in the material selection. This paper will present the contribution of the development of material selection method using Ashby’s for material selection charts for the application of bicycle frame system. Two methods such as, cost per unit strength and digital logic method are identified. The properties such as mechanical properties, including tensile strength, yield strength, Young’s modulus, toughness, density as well as cost, were considered as the key parameters in the material selection methods. The candidate materials are found to be AISI 1020 steel, Ti alloys, CFRP, KFRP and GFRP for bicycle frame system. The final analysis was led to the KFRP as the most appropriate material for bicycle frame. 2010 Conference or Workshop Item PeerReviewed application/pdf en http://irep.iium.edu.my/2019/1/Proc_SPPM2010.pdf Maleque, Md. Abdul and Sarker, Dyuti (2010) Materials for bicycle frame system - a case study on the development of selection method. In: The third international conference on structure, processing and properties of materials, 24 - 26 February, 2010, Dhaka.
repository_type	Digital Repository
institution_category	Local University
institution	International Islamic University Malaysia
building	IIUM Repository
collection	Online Access
language	English
topic	TA Engineering (General). Civil engineering (General) TN Mining engineering. Metallurgy
spellingShingle	TA Engineering (General). Civil engineering (General) TN Mining engineering. Metallurgy Maleque, Md. Abdul Sarker, Dyuti Materials for bicycle frame system - a case study on the development of selection method
description	The selection of the correct materials for a design is a key step in the process because it is the crucial decision that links computer calculations and lines on an engineering drawing with a working design. Materials, and manufacturing processes which convert the material into a useful part, underpin all of engineering design. In the relation of design stages and process selection with material selection, screening and ranking are two vital steps in the material selection. This paper will present the contribution of the development of material selection method using Ashby’s for material selection charts for the application of bicycle frame system. Two methods such as, cost per unit strength and digital logic method are identified. The properties such as mechanical properties, including tensile strength, yield strength, Young’s modulus, toughness, density as well as cost, were considered as the key parameters in the material selection methods. The candidate materials are found to be AISI 1020 steel, Ti alloys, CFRP, KFRP and GFRP for bicycle frame system. The final analysis was led to the KFRP as the most appropriate material for bicycle frame.
format	Conference or Workshop Item
author	Maleque, Md. Abdul Sarker, Dyuti
author_facet	Maleque, Md. Abdul Sarker, Dyuti
author_sort	Maleque, Md. Abdul
title	Materials for bicycle frame system - a case study on the development of selection method
title_short	Materials for bicycle frame system - a case study on the development of selection method
title_full	Materials for bicycle frame system - a case study on the development of selection method
title_fullStr	Materials for bicycle frame system - a case study on the development of selection method
title_full_unstemmed	Materials for bicycle frame system - a case study on the development of selection method
title_sort	materials for bicycle frame system - a case study on the development of selection method
publishDate	2010
url	http://irep.iium.edu.my/2019/ http://irep.iium.edu.my/2019/1/Proc_SPPM2010.pdf
first_indexed	2023-09-18T20:09:32Z
last_indexed	2023-09-18T20:09:32Z
_version_	1777407384992350208

Materials for bicycle frame system - a case study on the development of selection method

Similar Items