Torsional stiffness matrix of non-prismatic beam elements

Torsional stiffness matrix of non-prismatic beam elements

Bibliographic Details
Main Author:	Sulaeman, Erwin
Format:	Book Chapter
Language:	English
Published:	IIUM Press 2011
Subjects:	TA Engineering (General). Civil engineering (General) TJ Mechanical engineering and machinery
Online Access:	http://irep.iium.edu.my/21103/ http://irep.iium.edu.my/21103/ http://irep.iium.edu.my/21103/1/Chapter_14.pdf

Similar Items

Bending stiffness matrix of non-prismatic beam elements
by: Sulaeman, Erwin
Published: (2011)

Experimental geometric stiffness matrix formulation of beam finite element.
by: Sulaeman, Erwin
Published: (2011)

Translation of axis procedure to construct stiffness matrix
by: Sulaeman, Erwin
Published: (2011)

Overview of dynamics of flexible air vehicle
by: Sulaeman, Erwin
Published: (2011)

Minimum denominator of rational function
by: Sulaeman, Erwin
Published: (2011)

Analytical Finite Element Formulation of Non-uniform Euler-Bernoulli Beam
by: Sulaeman, Erwin, et al.
Published: (2011)

Review on matrix thermal absorber designs for solar air collector
by: A. Razak, Amir, et al.
Published: (2016)

Potential External Strengthening of Reinforced Concrete Beam Using Natural Fiber Composite Plate
by: Chin, Siew Choo, et al.
Published: (2017)

FBGs Real-Time Impact Damage Monitoring System of GFRP Beam Based on CC-LSL Algorithm
by: Vorathin, E., et al.
Published: (2018)

Finite element model updating of dissimilar plate with rivet joint
by: Rahman, Hammad A., et al.
Published: (2019)

Finite element analysis on deformation of stretchable electronic interconnect substrate using polydimethylsiloxanes (PDMS)
by: Roslan, Muhamad Fahmi Mohd, et al.
Published: (2018)

A novel investigation into the application of non-destructive evaluation for vibration assessment and analysis of in-service pipes
by: Noroozi, Siamak, et al.
Published: (2019)

Stress analysis of thin-walled laminated composite beams under shear and torsion
by: Syed Mohamed Ali, Jaffar, et al.
Published: (2018)

Compressor models
by: Idres, Moumen
Published: (2011)

Surge and rotating stall
by: Idres, Moumen
Published: (2011)

Precision grinding of silicon carbide using 76 µm grain diamond cup wheel
by: Mohamed , Konneh, et al.
Published: (2011)

Mechatronics book series: System design and signal processing (volume 2)
Published: (2011)

Modeling, analysis and fatigue life prediction of lower suspension arm
by: Rahman, Md. Mustafizur, et al.
Published: (2011)

Energy minimization approach for a two-link flexible manipulator
by: Faris, Waleed Fekry, et al.
Published: (2009)

Neural-Tuned PID controller for Point-to-point (PTP) positioning system: model reference approach
by: Martono, Wahyudi, et al.
Published: (2009)

A parametric study of neck moment response in a 3 year old child subjected to oblique side impact.
by: Shasthri, Sivaguru, et al.
Published: (2016)

A review of natural fibers and processing operations for the production of binderless boards
by: Tajuddin, Maisarah, et al.
Published: (2016)

3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016
by: Hrairi, Meftah
Published: (2017)

Enhanced piezoelectric properties of aluminium doped zinc oxide thin film for surface acoustic wave resonators on a CMOS platform
by: Md Ralib, Aliza Aini, et al.
Published: (2017)

PID-sliding surface based sliding mode controller for anti-lock braking system of electric vehicle
by: Alkharasani, Batool Abdulsamad, et al.
Published: (2016)

Low Cost Humidity Controlled Air-Conditioning System for Building Energy Savings in Tropical Climate
by: Azizuddin, Abd Aziz, et al.
Published: (2017)

Performance Analysis of Sio2/PAG Nanolubricant in Automotive Air Conditioning System
by: M. Z., Sharif, et al.
Published: (2017)

Design and parametric characterization of flexure bearing as automotive valve spring replacement
by: Mohd Razali, Hanipah, et al.
Published: (2019)

Effect of waste polyethylene terephthalate (PET) on properties of road aggregate
by: A. F., Ahmad, et al.
Published: (2019)

VIS-NIR spectral and particles distribution of Au, Ag, Cu, Al and Ni nanoparticles synthesized in distilled water using laser ablation
by: Mas Ira Syafila, Mohd Hilmi Tan, et al.
Published: (2019)

Mechanical behavior of hybrid glass Fiber-Jute reinforced with polymer composite for the wall of the Acehnese boat 'Jalo Kayoh'
by: Akram, A., et al.
Published: (2019)

Grease quality issues on middle voltage switchgear: corrosivity resistivity safety and ageing.
by: Mohd Sabri, Mahmud, et al.
Published: (2019)

Experimental analysis on the effect of area of surface cooling for a water-cooled photovoltaic
by: Firdaus, Basrawi, et al.
Published: (2018)

Feasibility study of standalone PV-wind-diesel energy systems for coastal residential application in Pekan, Pahang
by: Roziah, Zailan, et al.
Published: (2017)

Influence of Al2O3 nanoreinforcement on the adhesion and thermomechanical properties for epoxy adhesive
by: Nur Zalikha, Khalil, et al.
Published: (2019)

The mechanical properties of microwave sewage sludge ash (MSSA) as partial cement replacement in concrete
by: Tan, Chin Giap
Published: (2016)

Mixture formation and combustion characteristics of diesel-hydrogen dual fuel engine
by: Widodo Budi, Santoso
Published: (2016)

Effect of thermal oxidation and carbon concentration on Co-Cr-Mo alloy in enhanced corrosion protection
by: Mas Ayu, Hassan, et al.
Published: (2018)

Effect of Ferritic - Martensitic Constituent on Mechanical Property and Corrosion Behaviour of Medium Carbon Dual Phase (DP) Steel
by: Radhiyah, Abd Aziz, et al.
Published: (2018)

The thermal characteristics and performance of a ground heat exchanger for tropical climates
by: Mohd Yusof, Taib, et al.
Published: (2018)

Cannot write session to /tmp/vufind_sessions/sess_7a75fo2tcv0dlm5b4pqv7rl4ll