Investigation of minimum chip thickness in micro end milling of PMMA: process development

Investigation of minimum chip thickness in micro end milling of PMMA: process development

Bibliographic Details
Main Authors:	Mohammad , Yeakub Ali, -, Asfana Banu, -, Adibah, -, Nur Atikah
Format:	Book Chapter
Language:	English
Published:	IIUM Press 2011
Subjects:	TA Engineering (General). Civil engineering (General)
Online Access:	http://irep.iium.edu.my/21205/ http://irep.iium.edu.my/21205/1/1.pdf

Similar Items

Investigation of minimum chip thickness in micro end milling of PMMA: Experiment and analysis 800 µm diameter tool
by: Mohammad , Yeakub Ali, et al.
Published: (2011)

Investigation of minimum chip thickness in micro end milling of PMMA: experiment and analysis 1.0 mm diameter tool
by: Mohammad , Yeakub Ali, et al.
Published: (2011)

Prediction of minimum chip thickness in tool based micro end milling
by: Ali, Mohammad Yeakub, et al.
Published: (2012)

Effect of micro end milling tool diameter on minimum chip thickness
by: Mohammad , Yeakub Ali, et al.
Published: (2011)

Empirical modelling of vibration in micro end milling of PMMA
by: Ali, Mohammad Yeakub, et al.
Published: (2013)

Investigation of chip formation and minimum chip thickness in micro/meso milling: Methodology and design of experiment
by: Mohammad , Yeakub Ali, et al.
Published: (2011)

Investigation of Flow Behavior in Minimum Quantity Lubrication Nozzle for End Milling Processes
by: Najiha, M. S., et al.
Published: (2012)

Investigation of vibration and surface roughness in micro milling of PMMA
by: Ali, Mohammad Yeakub, et al.
Published: (2012)

Micro/meso milling of aluminium alloy 1100: analysis and modelling of minimum chip thickness
by: Mohammad , Yeakub Ali, et al.
Published: (2011)

Minimum chip thickness in machining MEMS structure using Tool Based Micromilling
by: Ali, Mohammad Yeakub, et al.
Published: (2011)

Development of micro end milling process for fabricating MEMS
by: Ali, Mohammad Yeakub
Published: (2009)

Process capability of high speed micro end-milling of Inconel 718 with minimum quantity lubrication
by: Abd. Rahman, Mohamed, et al.
Published: (2017)

Investigations of the causes of chatter in computer aided manufacturing process during end milling operation
by: Patwari, Muhammed Anayet Ullah, et al.
Published: (2011)

Vibration issue in micro end milling
by: Mohammad , Yeakub Ali, et al.
Published: (2011)

Fabrication of microfluidic channel using micro end milling and micro electrical discharge milling
by: Ali, Mohammad Yeakub
Published: (2009)

Prediction of burr formation in fabricating MEMS components by micro end milling
by: Ali, Mohammad Yeakub, et al.
Published: (2009)

Investigation of machining parameters for the multiple-response optimization of micro electrodischarge milling
by: Mehfuz, Reyad, et al.
Published: (2009)

Chip morphology as a performance predictor during high speed end milling of soda lime glass
by: Bagum, Mst. Nasima, et al.
Published: (2018)

Noble approach to control vibration using minimum quantity lubrication (MQL) in micro milling
by: Yeakub Ali, Mohammad, et al.
Published: (2019)

Investigation of accuracy in microdrilling with minimum quantity lubrication
by: Mohammad, Yeakub Ali, et al.
Published: (2017)

Investigation of Chip and Surface Roughness when Milling AISI304 Stainless Steel
by: K., Kadirgama
Published: (2017)

Experimental and numerical investigation on part thicknesses effects in tailor welded blank process
by: Anas Basri, Musthafa
Published: (2013)

Investigation of surface roughness and material removal rate for high speed micro end milling on PMMA
by: Rahman Azmil, Nur Atiqah, et al.
Published: (2015)

Investigation of taper angle in dry micro wire EDM
by: Ali, Mohammad Yeakub, et al.
Published: (2018)

Investigation of chatter arising during end milling operation on VMC and quality of machined surface
by: Nurul Amin, A.K.M, et al.
Published: (2011)

Investigation of finish cut of microelectrodischarge milling for nanosurface finish
by: Ali, Mohammad Yeakub, et al.
Published: (2009)

Study on the effects of nozzle distance to surface roughness of workpiece under minimum quantity lubricant (MQL) milling process
by: Firdaus Shazriq, Mohd Fadzil, et al.
Published: (2018)

Micro electro discharge machining of non-conductive ceramic using conductive powder mix dielectric fluid
by: Ali, Mohammad Yeakub, et al.
Published: (2016)

Investigation of corner radius using micro wire electro discharge machine
by: Sabur, Abdus, et al.
Published: (2011)

Cutting Force And Chip Formation In End Milling Operation When Machining Nickel-Based Superalloy, Hastelloy C-2000
by: N. H., Razak, et al.
Published: (2017)

Mathematical model of chip serration frequency in end milling of Inconel 718
by: Patwari, Muhammed Anayet Ullah, et al.
Published: (2008)

Predicting surface roughness with respect to process parameters using Regression Analysis Models in end milling
by: Adesta, Erry Yulian Triblas, et al.
Published: (2012)

Surface roughness analysis of beryllium-copper alloy in micro end milling
by: Mehfuz, R., et al.
Published: (2007)

Experimental investigation of the minimum quantity lubrication in end-milling of AA6061T6 by coated carbide tools
by: Abdul Muhaimin, Aris
Published: (2013)

Micro end milling of AISI 304 stainless steel and analysis of micro surface roughness
by: Ali, Mohammad Yeakub, et al.
Published: (2009)

High speed end milling in mould and die making
by: Suprianto, Mohamad Yuhan, et al.
Published: (2011)

Investigation of saw wood chips with different percentages in sand brick ratio 1:3
by: Nur Syamimi, Azli
Published: (2015)

Investigation of recast layer of non-conductive ceramic due to micro-EDM
by: Mohamed, Abd. Rahman, et al.
Published: (2014)

Chip serration frequency-the primary cause of chatter during end milling operation
by: Patwari, Muhammed Anayet Ullah, et al.
Published: (2011)

Investigation of mig welding on dissimilar thickness of metal sheets (steel and stainless steel)
by: Mohd Iqbal, Abd Razak
Published: (2012)