In-Situ syntheses of high wear resistant coating reinforced Ti-6al-4v Matrix

In-Situ syntheses of high wear resistant coating reinforced Ti-6al-4v Matrix

Bibliographic Details
Main Authors:	Ahmed Ghazal, Belal, Adesta, Erry Yulian Triblas
Format:	Book Chapter
Language:	English
Published:	IIUM Press 2011
Subjects:	TA Engineering (General). Civil engineering (General)
Online Access:	http://irep.iium.edu.my/21270/ http://irep.iium.edu.my/21270/1/23.pdf

Similar Items

Wear behaviour of TiC coated AISI 4340 steel produced by TIG surface melting
by: Maleque, Md. Abdul, et al.
Published: (2015)

Wear of aluminium matrix composite – effects of reinforcement combination
by: Maleque, Md. Abdul, et al.
Published: (2011)

The effect of deep cryogenic treatment on the properties of AISI D2 tool steel
by: Adesta, Erry Yulian Triblas, et al.
Published: (2011)

Wear Study of Mg-SiCp Reinforcement Aluminium Metal Matrix Composite
by: M. A., Maleque, et al.
Published: (2016)

Tool wear analysis in end milling of advanced ceramics with TiAlN and TiN coated carbide inserts
by: Reddy, M. Mohan, et al.
Published: (2012)

Effect of Sc Addition on the Microstructure and Wear Properties of A356 Alloy and A356–TiB2in Situ Composite
by: A. K., Prasada Rao, et al.
Published: (2015)

Abrasive wear response of TIG-melted TiC composite coating: Taguchi approach
by: Maleque, Md. Abdul, et al.
Published: (2017)

A review of wear mechanisms of ceramic-reinforced metal-matrix composite: case study of nano silica reinforced iron
by: Amir, Adibah, et al.
Published: (2011)

Wear study of Mg-SiCp reinforcement aluminium metal matrix composite
by: Maleque, Md. Abdul, et al.
Published: (2016)

Wear and corrosion of composite coated AISI 4340 steel exposed to jatropha curcas biodiesel
by: Maleque, Md. Abdul, et al.
Published: (2014)

Content comparative investigation on tool wear during end milling of AISI H13 steel with different tool path strategies
by: Adesta, Erry Yulian Triblas, et al.
Published: (2017)

Effects of TiN single layer coating on the wear of ZTA cutting inserts and surface roughness of workpiece
by: Ahmad Azhar, Ahmad Zahirani, et al.
Published: (2017)

In-Situ Measurement of Electrode Wear During EDM Drilling using Vision System
by: Zamzuri, Hamedon, et al.
Published: (2018)

Flexural behavior of reinforced concrete beam with variation of coated reinforcement
by: Koh, Zhi Yuan
Published: (2016)

Milling damage on carbon fibre reinforced polymer using tiAIN coated end mills
by: Konneh, Mohamed, et al.
Published: (2015)

Manufacturing management: from basic machining to quality product
by: Adesta, Erry Yulian Triblas
Published: (2011)

Wear of coated carbide insert in machining of mild steel
by: Mohamad Saiful, Izwan Busu
Published: (2010)

In-Situ Measurement Of Electrode Wear During Edm Drilling Using Vision System
by: Zamzuri, Hamedon, et al.
Published: (2016)

Aluminum spray coating for corrosion resistance of steel
by: -, Suryanto
Published: (2011)

Effect of Reinforcement Alignment to the Properties of Polymer Matrix Composite
by: Siti Rabiatull Aisha, Idris, et al.
Published: (2013)

Scratch Adhesion and Wear Failure Characteristics of PVD multilayer CrTi/CrTiN Thin Film Ceramic Coating Deposited on AA7075-T6 Aerospace Alloy
by: Quazi, M. M., et al.
Published: (2018)

Investigation of wear behavior of cutting tool insert for ti-alloy machining using carbon coated with sic sandblasting and hf acid pretreatment
by: Mohd Izul Aslam, Mohd Khalit
Published: (2012)

Quality management system: in light of project management
by: Adesta, Erry Yulian Triblas, et al.
Published: (2011)

Dipcoating of Poly (E-caprolactone)/hydroxyapatite Composite Coating on Ti6Al4V for Enhanced Corrosion Protection
by: Mas Ayu, Hassan, et al.
Published: (2014)

Aluminium metal matrix composite: improving wear performance through treatment
by: Maleque, Md. Abdul, et al.
Published: (2011)

Structural and Phase Formation of TiAl Alloys Synthesized by Mechanical Alloying and Heat Treatment
by: Al-Dabbagh, Jinan B., et al.
Published: (2015)

Comparison of uncoated and coated carbide inserts in end milling of Ti–6Al–4V in terms of surface roughness
by: Hossain, Mohammad Ishtiaq, et al.
Published: (2008)

Wear Mechanism of Coated and Uncoated Carbide Cutting Tool in Machining Process
by: J. A., Ghani, et al.
Published: (2016)

Effects of alignment of reinforcement material to the properties of Polymer Matrix Composite (PMC)
by: Aeyzarq Muhammad Hadzreel, Mohd Razali
Published: (2012)

Effects of austempering treatment on mechanical properties of ductile iron
by: Ahmed Ghazal, Belal, et al.
Published: (2011)

The effect of deep cryogenic treatment on the properties of AISI D2 tool steel
by: Ahmed Ghazal, Belal, et al.
Published: (2011)

Effect of the Milling Parameters on the Characteristics of Ti-50%Al Nanocrystallite Synthesized by Mechanical Alloying (MA)
by: Al-Dabbagh, Jinan B., et al.
Published: (2013)

High speed end milling in mould and die making
by: Suprianto, Mohamad Yuhan, et al.
Published: (2011)

Performance of cermet tools : applying negative rake angles high speed machining
by: Adesta, Erry Yulian Triblas, et al.
Published: (2010)

Welding performance of a homemade friction stir welding tool
by: Hilmy, Irfan, et al.
Published: (2014)

Wear behaviour optimization of TIG parameters on wear behavior of sic embedded coatings using Taguchi approach
by: Maleque, Md. Abdul, et al.
Published: (2016)

Preparation, scratch adhesion and anti-corrosion performance of TiO2-MgO-BHA coating on Ti6Al4V implant by plasma electrolytic oxidation technique
by: Adeleke, Sakiru Adekunle, et al.
Published: (2018)

Fracture behavior of natural fiber reinforced biopolymer matrix composite
by: Yusof, Yusliza, et al.
Published: (2008)

Influence of backcutting phenomena to surface roughness of hardened AISI H13 during high speed end milling process
by: Mohd Ali, Afifah, et al.
Published: (2011)

Effect of TiC Particulates on the Microstructure and Mechanical Properties of Aluminium-Based Metal Matrix Composite
by: Suraya, Sulaiman, et al.
Published: (2014)

Cannot write session to /tmp/vufind_sessions/sess_03hd3kv3q7c7qgltuq5vv149im