Design for manufacture: towards improved manufacturability

Design for manufacture: towards improved manufacturability

Bibliographic Details
Other Authors:	Adesta, Erry Yulian Triblas
Format:	Book
Language:	English
Published:	IIUM Press 2011
Subjects:	TA401 Materials of engineering and construction
Online Access:	http://irep.iium.edu.my/21317/ http://irep.iium.edu.my/21317/ http://irep.iium.edu.my/21317/1/Book.pdf

Similar Items

The introduction of fit manufacturing as a performance measuring approach towards sustainability of selected manufacturing companies in Malaysia
by: Wan Yusoff, Wan Ahmad Yusmawiza, et al.
Published: (2011)

Performance measurement of SMEs manufacturing sector in Malaysia
by: Wan Yusoff, Wan Ahmad Yusmawiza, et al.
Published: (2011)

Physical and mechanical properties of concrete incorporating manufactured sand
by: Ali, Maisarah, et al.
Published: (2015)

A surgical training model manufacture using fused deposition modeling
by: Mohamad Ali, Hasanudin Hafis, et al.
Published: (2011)

The impact of manufactured sand (M-Sand) as partially and fully replacement of fine aggregate in concrete
by: Nadimalla, Altamashuddinkhan, et al.
Published: (2020)

The effect of replacement of natural sand by manufactured sand on the properties of the concrete
by: Nadimalla, Altamashuddinkhan, et al.
Published: (2019)

Improvement of typical hip-joint design for gripping and fixing
by: Mohamad Badari, Siti Norbahiyah, et al.
Published: (2011)

Application of statistical quality control for quality improvement
by: Mohamed Ariff, Tasnim Firdaus, et al.
Published: (2011)

Design of bicycle helmet using FEA
by: Mohamed Ariff, Tasnim Firdaus, et al.
Published: (2011)

Design of a simple and affordable electric bicycle
by: Mohamed Ariff, Tasnim Firdaus, et al.
Published: (2011)

Mould design for handphone casing using moldflow
by: Mohamed Ariff, Tasnim Firdaus, et al.
Published: (2011)

Design and fabrication of industrial welding robotic arm
by: Syed Abdullah, Syed Idros, et al.
Published: (2011)

Design and performance analysis of VCO for standard GSM using MEMS
by: Al-Khateeb, Khalid A. Saeed, et al.
Published: (2010)

A critical review on the contributions of chemical and physical factors toward the nucleation and growth of large-area graphene
by: Ani, Mohd Hanafi, et al.
Published: (2018)

Incorporation of poly(Vinyl alcohol) for the improved properties of hydrothermal derived calcium phosphate cements
by: Razali, Nurul Nabilah, et al.
Published: (2018)

Materials selection and design
by: Maleque, Md. Abdul, et al.
Published: (2013)

The exposure assessment of airborne particulates matter (PM10 & PM2.5) towards building occupants: a case study at KL Sentral, Kuala Lumpur, Malaysia
by: Mohd Din, Shamzani Affendy, et al.
Published: (2014)

Observation on void formed in oxide scale of Fe-Cr-Ni alloy at 1073K in dry and humid environments
by: Akhbar, Kaderi, et al.
Published: (2011)

Dependence of the fracture toughness on the sintering time of dense hydroxyapatite bioceramics
by: Tolouei, Ranna, et al.
Published: (2011)

Chemical resistance tests on PP-ternary nanocomposite for its application in bioreactor liner fabrication
by: Yusof, Faridah, et al.
Published: (2011)

Effect of hydroxyapatite and tricalcium phosphate addition on protein foaming-consolidation porous alumina
by: Sopyan, Iis, et al.
Published: (2011)

Properties of compression moulding starch-nanoclay biocomposites
by: Ahmad, Zuraida, et al.
Published: (2011)

Reverse engineering for rapid prototyping of automotive components
by: Wan Yusoff, Wan Ahmad Yusmawiza, et al.
Published: (2011)

The development of cost estimation for quality assurance system in die-casting processes
by: A Hamzah, Nur Hanisah, et al.
Published: (2011)

Study the adherence of the values in the ISO 9001:2000 certified companies in Malaysia
by: Che Daud, Mohd Radzi, et al.
Published: (2011)

Cost comparison analysis between strip to coil for support brake pedal at Suria Component (M) Sdn. Bhd
by: Che Daud, Mohd Radzi, et al.
Published: (2011)

Implementation of FMECA on Fixed Assembly Cell (FAC)
by: Wan Yusoff, Wan Ahmad Yusmawiza, et al.
Published: (2011)

Fabrication of metal matrix composite automotive brake rotor: part 1
by: Maleque, Md. Abdul
Published: (2011)

Fabrication of metal matrix composite automotive brake rotor: part 2
by: Maleque, Md. Abdul
Published: (2011)

Wear of aluminium matrix composite – effects of reinforcement combination
by: Maleque, Md. Abdul, et al.
Published: (2011)

Mechanical properties of wood plastic composites
by: Ooi, Chong Jin, et al.
Published: (2011)

Properties of wood fiber reinforced polypropylene composite
by: Mridha, Shahjahan, et al.
Published: (2011)

The effects of chemical and mechanical treatments on coir fiber to mechanical properties of coir-albumen-concrete
by: Ahmad, Zuraida, et al.
Published: (2011)

Architecture of chopped fiber glass in plastic composite processed under different loads
by: Md Idriss, Ahmed Nazrin, et al.
Published: (2011)

Variation of fiber architecture on loads applied in fabrication of epoxy/woven fiber glass composites
by: Md Idriss, Ahmed Nazrin, et al.
Published: (2011)

Impact behaviour of carbon/epoxy composites in moisture and temperature environments
by: Mridha, Shahjahan
Published: (2011)

Impact strength behaviour of the woven and chopped fiber glass composites at different temperatures
by: Md Idriss, Ahmed Nazrin, et al.
Published: (2011)

An investigation of hybrid composites tubes subjected to quasi-static loading
by: Yussof, Farrah, et al.
Published: (2011)

Mechanical behaviour of Biopolymer Cotton Albumen Clay (BCAC) composites
by: Teoh, Swin Le, et al.
Published: (2011)

The effect of processing parameters on tensile properties Empty Fruit Bunch (EFB) fiber reinforced thermoplastic natural rubber composites
by: Hassan, Noor Azlina, et al.
Published: (2011)