The development of cost estimation for quality assurance system in die-casting processes

The development of cost estimation for quality assurance system in die-casting processes

Bibliographic Details
Main Authors:	A Hamzah, Nur Hanisah, Azmi, Nurhafizah, Adesta, Erry Yulian Triblas
Format:	Book Chapter
Language:	English
Published:	IIUM Press 2011
Subjects:	TA401 Materials of engineering and construction
Online Access:	http://irep.iium.edu.my/21341/ http://irep.iium.edu.my/21341/ http://irep.iium.edu.my/21341/1/9.pdf

Similar Items

Improvement of typical hip-joint design for gripping and fixing
by: Mohamad Badari, Siti Norbahiyah, et al.
Published: (2011)

Fabrication of CuSiC composite by powder metallurgy route
by: A. R. , Fatimah Azreen, et al.
Published: (2011)

Optimum KOH wet etching of cantilever tip for better image captured by nanoeducator
by: Edy Sutjipto, Agus Geter, et al.
Published: (2011)

Effect of cooling rate on strength and fracture surfaces of alpha brass casting
by: Haque, Md. Mohafizul, et al.
Published: (2008)

Effect of silicon on strength and fracture surfaces of aluminium–silicon casting and heat treated alloys
by: Haque, Md. Mohafizul, et al.
Published: (2006)

Effects of doping elements in β-FeSi2 prepared utilizing cast iron scrap chips
by: Nor Hairin, Assayidatul Laila, et al.
Published: (2016)

Influence of cutting parameters on cutting force and cutting temperature during pocketing operations
by: Hamidon, R., et al.
Published: (2016)

Application of statistical quality control for quality improvement
by: Mohamed Ariff, Tasnim Firdaus, et al.
Published: (2011)

Effects of forming temperature and sintering rate to the final properties of FeCuAl powder compacts formed through uniaxial die compaction process
by: Rahman, Md. Mujibur, et al.
Published: (2018)

Upgrade recycling of cast iron scrap chips towards β-FeSi2 thermoelectric materials
by: Nor Hairin, Assayidatul Laila, et al.
Published: (2014)

Development and optimization of High-Hertz stress contact to reduce future contact material cost
by: Bhuiyan, Moinul
Published: (2010)

Micro connector fabricated by micro process technology
by: Bhuiyan, Md. Moinul Islam, et al.
Published: (2000)

Effect of stir casting process parameters on tribological performance of Al6061-SiCp composite
by: Adebisi, A. A., et al.
Published: (2016)

Effect of holding time on the corrosion potential of SS304
by: Purwanto, Hadi, et al.
Published: (2012)

Application of low cost polyurethane (PU) foam for fabricating porous tri-calcium phosphate (TCP)
by: Abdul Rahman, Fariza, et al.
Published: (2010)

Development process for tar filtering from biomass pyrolysis
by: Naili Rozan, Alya, et al.
Published: (2015)

Cost comparison analysis between strip to coil for support brake pedal at Suria Component (M) Sdn. Bhd
by: Che Daud, Mohd Radzi, et al.
Published: (2011)

Study the influence of the anodizing process parameters on the anodized copper hardness
by: Mahmood, Mahmood Hameed, et al.
Published: (2017)

Optimizing the processing conditions of sodium potassium niobate thin films prepared by sol-gel spin coating technique
by: Mohd Hatta, Maziati Akmal, et al.
Published: (2018)

Architecture of chopped fiber glass in plastic composite processed under different loads
by: Md Idriss, Ahmed Nazrin, et al.
Published: (2011)

Effect of processing conditions in the preparation of PP-Ternary Nanocomposite using MWCNT as secondary filler
by: Olalekan, Salawudeen Taofeeq, et al.
Published: (2011)

The effect of processing parameters on tensile properties Empty Fruit Bunch (EFB) fiber reinforced thermoplastic natural rubber composites
by: Hassan, Noor Azlina, et al.
Published: (2011)

Carbon deposition from biotar by fast pyrolysis using the chemical vInfiltration process within porous low-grade iron ore for iron-making
by: Rozhan, Alya Naili, et al.
Published: (2012)

Characterization, microstructure properties and impurities removal of treated rice husk ash (TRHA) as supplementary cementing material (SCM) in concrete using hydrochloric acid pretreatment process
by: Saad, Siti Asmahani, et al.
Published: (2015)

Energy and cost analysis of weight reduction using composite brake rotor
by: Maleque, Md. Abdul, et al.
Published: (2012)

Effect of titania and magnesia on the physical properties of zirconia toughened alumina
by: Manshor, Hanisah, et al.
Published: (2016)

Effect of Numbers of Fringing Electric Field (FEF) Fingers on the Performance of Sensor for Water Content in Soil
by: Azman, Mohd Farizul, et al.
Published: (2013)

Effect of single walled carbon nanotube addition to the physical properties of monolithic alumina
by: Ahmad Azhar, Ahmad Zahirani, et al.
Published: (2018)

Synthesis of copper nanoparticles by electroreduction process
by: Mohan, Raja, et al.
Published: (2008)

Materials processing technology with Islamic perspective
by: Maleque, Md. Abdul
Published: (2017)

Effect of chilled air on tool wear and workpiece quality during milling of carbon ﬁbre-reinforced plastic
by: Muhamad Khairussaleh, Nor Khairusshima, et al.
Published: (2013)

Antiwashout behavior of calcium phosphate cement incorporated with poly(ethylene glycol)
by: Hablee, Sufiamie, et al.
Published: (2018)

Calcium phosphate cement for bone filler applications
by: Hablee, Sufiamie, et al.
Published: (2017)

Mechanism of carbon deposition within char derived from oil palm empty fruit bunch
by: Rozhan, Alya Naili, et al.
Published: (2019)

A surgical training model manufacture using fused deposition modeling
by: Mohamad Ali, Hasanudin Hafis, et al.
Published: (2011)

Effect of Poly(Vinyl Alcohol) addition on the properties of hydrothermal derived calcium phosphate cement for bone filling materials
by: Razali, Nurul Nadirah, et al.
Published: (2017)

Novel injectable calcium phosphate bone cement from wet chemical precipitation method
by: Hablee, Sufiamie, et al.
Published: (2017)

The effects of excess calcium on the handling and mechanical properties of hydrothermal derived calcium phosphate bone cement
by: Razali, Nurul Nadirah, et al.
Published: (2018)

Carbon doped iron ore using palm kernel shell
by: Zamani Abd Rashid, Rusila, et al.
Published: (2013)

Magnetization of low grade iron ore using empty fruit bunch ash
by: Yunus, Nurul Azhani, et al.
Published: (2013)

Cannot write session to /tmp/vufind_sessions/sess_qkf4eqlcmfggb0kbo0veo0a6lg