Performance measurement of SMEs manufacturing sector
in Malaysia

Performance measurement of SMEs manufacturing sector in Malaysia

Bibliographic Details
Main Authors:	Wan Yusoff, Wan Ahmad Yusmawiza, Md Noraini, Muhammad Fauzan, Ismail, Mohd Norazrul
Format:	Book Chapter
Language:	English
Published:	IIUM Press 2011
Subjects:	TA401 Materials of engineering and construction
Online Access:	http://irep.iium.edu.my/21344/ http://irep.iium.edu.my/21344/ http://irep.iium.edu.my/21344/1/12.pdf

Similar Items

The introduction of fit manufacturing as a performance measuring approach towards sustainability of selected manufacturing companies in Malaysia
by: Wan Yusoff, Wan Ahmad Yusmawiza, et al.
Published: (2011)

A surgical training model manufacture using fused deposition modeling
by: Mohamad Ali, Hasanudin Hafis, et al.
Published: (2011)

Design for manufacture: towards improved manufacturability
Published: (2011)

Implementation of FMECA on Fixed Assembly Cell (FAC)
by: Wan Yusoff, Wan Ahmad Yusmawiza, et al.
Published: (2011)

Reverse engineering for rapid prototyping of automotive components
by: Wan Yusoff, Wan Ahmad Yusmawiza, et al.
Published: (2011)

Physical and mechanical properties of concrete incorporating manufactured sand
by: Ali, Maisarah, et al.
Published: (2015)

Design and fabrication of industrial welding robotic arm
by: Syed Abdullah, Syed Idros, et al.
Published: (2011)

The study of the implementation of OHSAS: 18001 at Kulliyyah of Engineering
by: Wan Yusoff, Wan Ahmad Yusmawiza, et al.
Published: (2011)

The impact of manufactured sand (M-Sand) as partially and fully replacement of fine aggregate in concrete
by: Nadimalla, Altamashuddinkhan, et al.
Published: (2020)

Performance of hybrid filament wound composites tubes subjected to quasi static indention
by: Ahmad, Zuraida, et al.
Published: (2007)

Study the performance of porous pavement on urban thermal environment. Part 1: Field observation
by: Eusuf, Muhammad Abu, et al.
Published: (2008)

Development of low normal force contact with stable performance
by: Bhuiyan, Moinul
Published: (2010)

Design and performance analysis of VCO for standard GSM using MEMS
by: Al-Khateeb, Khalid A. Saeed, et al.
Published: (2010)

Protein foaming-consolidation method for fabrication of high performance porous bioceramics
by: Sopyan, Iis, et al.
Published: (2013)

The effect of replacement of natural sand by manufactured sand on the properties of the concrete
by: Nadimalla, Altamashuddinkhan, et al.
Published: (2019)

Effect of polycarboxylate ether (PCE) addition to physical and mechanical characteristics of high performance concrete
by: Ali, Maisarah, et al.
Published: (2015)

Effect of Numbers of Fringing Electric Field (FEF) Fingers on the Performance of Sensor for Water Content in Soil
by: Azman, Mohd Farizul, et al.
Published: (2013)

Physicochemical properties and pozzolanic performance of ultrafine treated rice husk ash (uftrha) as additive in concrete
by: Saad, Siti Asmahani, et al.
Published: (2018)

Effect of titania and magnesia on the physical properties of zirconia toughened alumina
by: Manshor, Hanisah, et al.
Published: (2016)

Relationship between average slope of textured substrate and poly-Si thin film solar cells performance
by: Muhida, Riza, et al.
Published: (2009)

Effect of tropical climate condition to compressive strength and microstructure properties of high performance fiber reinforced reinforced concrete (HPFRC)
by: Saad, Siti Asmahani, et al.
Published: (2015)

Characterization of biodegradable composite based on polycaprolactone/starch reinforced with sugarcane bagasse microfibrillated cellulose
by: Jimat, Dzun Noraini, et al.
Published: (2016)

The effect of hard nanofillers on mechanical properties of PVC nanocomposites
by: Samat, Noorasikin, et al.
Published: (2011)

Effect of superheating temperatures on microstructure and properties of strontium modified aluminium–silicon eutectic alloy
by: Haque, Md. Mohafizul, et al.
Published: (2005)

Effect of cooling rate on strength and fracture surfaces of alpha brass casting
by: Haque, Md. Mohafizul, et al.
Published: (2008)

Influence of water molar ratio on fabrication of silica ceramic membranes via sol-gel dip-coating method
by: Kahlib, Nor Amyra Zulianey, et al.
Published: (2018)

Dependence of the fracture toughness on the sintering time of dense hydroxyapatite bioceramics
by: Tolouei, Ranna, et al.
Published: (2011)

Effect of silicon on strength and fracture surfaces of aluminium–silicon casting and heat treated alloys
by: Haque, Md. Mohafizul, et al.
Published: (2006)

Fabrication of metal matrix composite automotive brake rotor: part 1
by: Maleque, Md. Abdul
Published: (2011)

Fabrication of metal matrix composite automotive brake rotor: part 2
by: Maleque, Md. Abdul
Published: (2011)

A critical review of metal matrix composite brake rotor
by: Maleque, Md. Abdul
Published: (2011)

Technology of moulding for composite auto brake rotor
by: Maleque, Md. Abdul
Published: (2011)

Studies of polyethylene-based biocomposites, bionanocomposites and other non-biobased nanocomposites
by: Sarifuddin, Norshahida, et al.
Published: (2016)

Fabrication of nickel aluminide intermetallic-alumina nanocomposite
by: Ismail, Roslina, et al.
Published: (2011)

Synthesis and characterization Of nanocrystalline Ni3Al intermetallic produced by mechanical alloying and reaction synthesis
by: Ismail, Roslina, et al.
Published: (2011)

The effect of kenaf core fibre loading on properties of low density polyethylene/thermoplastic sago starch/kenaf core fiber composites
by: Sarifuddin, Norshahida, et al.
Published: (2013)

Influence of halloysite nanotubes hybridized with kenaf core fibers on the physical and mechanical properties of low density polyethylene/thermoplastic sago starch blends
by: Sarifuddin, Norshahida, et al.
Published: (2014)

Effect of oil palm ash on the mechanical and thermal properties of unsaturated polyester composites
by: Sahari, Japar, et al.
Published: (2016)

Mechanical Properties of Bamboo Fibre Composite Incorporating Pulverized Fuel Ash
by: Ali, Maisarah, et al.
Published: (2015)

Mechanical properties of bamboo fibre composite incorporating pulverized fuel ash
by: Ali, Maisarah, et al.
Published: (2014)

Cannot write session to /tmp/vufind_sessions/sess_5iu2ikms7465ns79bc6jdinp8d