Microwave sintering of metallic materials

Microwave sintering of metallic materials

Bibliographic Details
Main Author:	Mohamed Ariff, Tasnim Firdaus
Format:	Book Chapter
Language:	English
Published:	IIUM Press 2011
Subjects:	TS Manufactures
Online Access:	http://irep.iium.edu.my/21360/ http://irep.iium.edu.my/21360/ http://irep.iium.edu.my/21360/1/21.pdf

Similar Items

Microwave sintering of ceramic materials
by: Mohamed Ariff, Tasnim Firdaus
Published: (2011)

Cost analysis of using hybrid microwave post-sintered aluminium oxide inserts
by: Ariff, Tasnim Firdaus, et al.
Published: (2014)

Cost analysis of using hybrid microwave post-sintered silicon nitride inserts
by: Ariff, Tasnim Firdaus, et al.
Published: (2015)

The effect of copper and antimony on the mechanical properties of pewter alloys made by conventional and microwave powder sintering
by: Mohamed Ariff, Tasnim Firdaus, et al.
Published: (2009)

The effect of powder sintering method on the densification and microstructure of pewter alloys
by: Mohamed Ariff, Tasnim Firdaus, et al.
Published: (2009)

Effect of microwave sintering treatment to the flank wear of titanium carbide tools in milling operations
by: Iqbal, Mohammad, et al.
Published: (2015)

Enhancing tool life with the development of silicon nitride based inserts for high speed machining of Inconel 718 using hybrid microwave sintering
by: Ariff, Tasnim Firdaus, et al.
Published: (2018)

Enhanced heating mechanism of the electric metal melting furnace in traditional foundry
by: Mohamed Ariff, Tasnim Firdaus, et al.
Published: (2015)

Enhancing mechanical and structural properties of TiC inserts using microwave energy
by: Mohamed Ariff, Tasnim Firdaus, et al.
Published: (2011)

Effects of powder synthesis method on the sinterability of hydroxyapatite
by: K. L., Aw, et al.
Published: (2011)

Effect of nano silica on the sinterability of hydroxyapatite dense bodies
by: Ranna, Tolouei, et al.
Published: (2011)

Sintering of hydroxyapatite ceramic produced by wet chemical method
by: Singh, Ramesh, et al.
Published: (2011)

Sintering behaviour of hydroxyapatite prepared from different routes
by: S., Ramesh, et al.
Published: (2012)

Enhancing tool life of hot isostatically pressed silicon nitride inserts in machining inconel 718 with different susceptors through hybrid microwave post sintering
by: Ariff, Tasnim Firdaus, et al.
Published: (2018)

Micro-drilling of metallic materials for microsystems technology
by: Ali, Mohammad Yeakub
Published: (2008)

Effect of Sintering Temperature on Functionally Graded Nickel/Alumina Plate
by: Muhammad Ihsan, Abdul Latiff, et al.
Published: (2014)

Investigation of the effect of "Orange Peel" surface texture on the laser sintered part
by: Wan Yusoff, Wan Ahmad Yusmawiza, et al.
Published: (2011)

A Review on the Fabrication Techniques of Functionally Graded Ceramic-Metallic Materials in Advanced Composites
by: Nuruzzaman, D. M., et al.
Published: (2013)

Study on end brush deburring and sintered diamond ball deburring of micro-features milled
by: Sai, T. K., et al.
Published: (2019)

Experimental Study on Friction Coefficient and Wear Rate of Gun Metal Sliding Against Different Counterface Materials
by: Nuruzzaman, D. M., et al.
Published: (2014)

TIG torch surfacing of metallic materials - a critical review
by: M., Azwan, et al.
Published: (2018)

Enhancing mechanical and structural properties of pewter alloy using microwave sintering
by: Mohamed Ariff, Tasnim Firdaus
Published: (2008)

Surface modification by EDM using Co-Cr sintered powder metallurgy electrode
by: Khan, Ahsan Ali, et al.
Published: (2012)

Surface modification by EDM using CO-CR sintered powder metallurgy electrod
by: Khan, Ahsan Ali, et al.
Published: (2012)

Experimental analysis and pressureless sintering of powder processed functionally graded nickel alumina plates
by: Muhammad Ihsan, Abdul Latiff
Published: (2019)

Modification of lignin content in wood fiber by microwave heating and laccase treatment
by: Muhammad 'Izzat, Saidon
Published: (2010)

Effect of microwave sintering on the mechanical and structural properties of pewter alloy
by: Mohamed Ariff, Tasnim Firdaus, et al.
Published: (2008)

Investigation of the effect of “Orange Peel” surface texture on the laser sintered part
by: Wan Yusoff, Wan Ahmad Yusmawiza, et al.
Published: (2011)

Thermal Shock and Fatigue Behavior of Pressureless Sintered Al2O3–SiO2–ZrO2 Composites
by: Mebrahitom, A., et al.
Published: (2015)

Study on operational characteristics of low power atmospheric pressure microwave plasma spray method
by: Ahmad Redza, Ahmad Mokhtar
Published: (2016)

Mig welding of dissimilar metal (steel and aluminium)
by: Mohd Azizul Hafiz, Abdul Sani
Published: (2012)

High Anatase Rate Titanium Dioxide Coating Deposition by Low Power Microwave Plasma Spray
by: Ahmad, Redza, et al.
Published: (2016)

Noble approach to control vibration using minimum quantity lubrication (MQL) in micro milling
by: Yeakub Ali, Mohammad, et al.
Published: (2019)

Sintering and properties of dense manganese-doped calcium phosphate bioceramics prepared using sol-gel derived nanopowders
by: Sopyan, Iis, et al.
Published: (2011)

Dry machining of T6061 aluminium alloy using titanium nitride (TiN)and titanium carbonitride (TiCN) coated tools
by: Mohamed Ariff, Tasnim Firdaus, et al.
Published: (2013)

Design and development of a versatile ice clamping system
by: Bahar, Rubina, et al.
Published: (2014)

Analysis of a Metal Matrix Composites Automotive Component
by: Fatchurrohman, Nanang, et al.
Published: (2015)

Deposition of Hard Chrome Coating onto Heat Susceptible Substrates by Low Power Microwave Plasma Spray
by: Ahmad, Redza, et al.
Published: (2016)

Deposition of high hardness coating by low power atmospheric pressure microwave plasma spray and the characteristics evaluations
by: Ahmad Redza, Ahmad Mokhtar
Published: (2012)

Improvements in the development of silicon nitride inserts using hybrid microwave energy for machining Inconel 718
by: Ariff, Tasnim Firdaus, et al.
Published: (2018)

Cannot write session to /tmp/vufind_sessions/sess_5l7qdfkejeaak5gkocp35bjhi9