Study of the effect of different electrodes on material removal rate, electrode wear rate and surface roughness in the EDM of S-STAR

Study of the effect of different electrodes on material removal rate, electrode wear rate and surface roughness in the EDM of S-STAR

Bibliographic Details
Main Authors:	Konneh, Mohamed, Shad, Nur Jannah, Saharudin, Noor Fazlin
Format:	Book Chapter
Language:	English
Published:	IIUM Press 2011
Subjects:	TS Manufactures
Online Access:	http://irep.iium.edu.my/21384/ http://irep.iium.edu.my/21384/ http://irep.iium.edu.my/21384/1/32.pdf

Similar Items

Study of the effects of EDM parameters on material removal rate , electrode wear rate and surface roughness in the EDM of S-Star
by: Mohamed , Konneh
Published: (2010)

Electrode wear and material removal rate during EDM of aluminum and mild steel using copper and brass electrodes
by: Khan, Ahsan Ali
Published: (2008)

Analysis of the Influence of EDM Parameters on Surface Quality, Material Removal Rate and Electrode Wear of Tungsten Carbide
by: Siti Haryani, Tomadi, et al.
Published: (2009)

Tool wear rate during electrical discharge machining (EDM) with eccentric electrode
by: Khan, Ahsan Ali, et al.
Published: (2011)

A study on material removal rate during EDM with tantalum carbide-copper compacted electrode
by: Khan, Ahsan Ali, et al.
Published: (2011)

Minimizing wear of EDM electrode in machining a hard material
by: Muhammad Qahri Harir, Mohd Rapi
Published: (2017)

Effect of discharge current and electrode size on material removal rate and wear ratio in electrical discharge machining
by: Khan, Ahsan Ali, et al.
Published: (2010)

Influence of electrode cooling on material migration among the electrodes during EDM of titanium alloy
by: Abdulkareem, Suleiman, et al.
Published: (2011)

Influence of electrode cooling on material migration among the electrodes during edm of titanium alloy
by: Abdulkareem, Suleiman, et al.
Published: (2011)

Surface roughness studies in die-sink EDM of tungsten carbide using copper tungsten electrode
by: Konneh, Mohamed, et al.
Published: (2011)

Modelling the surface roughness behaviour of an EDMed workpiece with different tool electrodes using DoE
by: Mohammed Baba, Ndaliman, et al.
Published: (2013)

Modelling the surface roughness behaviour of an EDMed workpiece with different tool electrodes using DoE
by: Ndaliman, Mohammed Baba, et al.
Published: (2013)

Study of material removal rate and electrode wear ratio for micro electrical discharge milling of AISI 420 and Stavax ESR
by: Mohammad, Yeakub Ali, et al.
Published: (2009)

RSM model to evaluate material removal rate in EDM of Ti-5Al-2.5Sn using graphite electrode
by: Md. Ashikur, Rahman Khan, et al.
Published: (2012)

Features of electrode wear during EDM of mild steel with TaC-Cu powder compacted electrodes
by: Khan, Ahsan Ali, et al.
Published: (2011)

Cooling effect on electrode and process parameters in EDM
by: Abdulkareem, Suleiman, et al.
Published: (2010)

Effect of surface roughness using different electrodes on electrical discharge machining
by: Mohd Abd Latif, Abd Ghani
Published: (2008)

Wear ratio and work surface finish during electrical discharge machining (EDM) with eccentric electrode
by: Khan, Ahsan Ali, et al.
Published: (2011)

Electro-discharge machining of alumina: investigation of material removal rate and surface roughness
by: Ali, Mohammad Yeakub, et al.
Published: (2017)

In-Situ Measurement of Electrode Wear During EDM Drilling using Vision System
by: Zamzuri, Hamedon, et al.
Published: (2018)

In-Situ Measurement Of Electrode Wear During Edm Drilling Using Vision System
by: Zamzuri, Hamedon, et al.
Published: (2016)

A study on capabilities of different electrode materials during electrical discharge machining (EDM)
by: Al Hazza, Muataz Hazza Faizi, et al.
Published: (2017)

Micro wire electro discharge grinding: optimization of material removal rate and surface roughness
by: Ali, Mohammad Yeakub, et al.
Published: (2017)

Electrode Wear Rate of Graphite Electrodes during Electrical Discharge Machining Processes on Titanium Alloy Ti-5Al-2.5Sn
by: Khan, Md. Ashikur Rahman, et al.
Published: (2014)

Relationship between electrode size and machined surface in the EDM machining process
by: Mohd Azrul Aminur, Ismail
Published: (2008)

Surface quality produced in EDM with tungsten carbide and copper compacted electrodes
by: Khan, Ahsan Ali, et al.
Published: (2015)

Effect of size and shape of electrodes on the performance of EDM
by: Khan, Ahsan Ali, et al.
Published: (2008)

Investigation of surface roughness and material removal rate for high speed micro end milling on PMMA
by: Rahman Azmil, Nur Atiqah, et al.
Published: (2015)

Influence of electrode cooling on recast layers and micro crack in EDM of titanium
by: Abdulkareem, Suleiman, et al.
Published: (2011)

Influence of current, spark on-time and off-time on electrode wear during EDM of mild steel
by: Khan, Ahsan Ali, et al.
Published: (2011)

Innovative method of measuring electrode wear during EDM drilling process using vision system
by: Zamzuri, Hamedon, et al.
Published: (2018)

Role of current, voltage and spark on-time on electrode material migration during EDM
by: Khan, Ahsan Ali, et al.
Published: (2011)

Surface modification by EDM using Co-Cr sintered powder metallurgy electrode
by: Khan, Ahsan Ali, et al.
Published: (2012)

Surface modification by EDM using CO-CR sintered powder metallurgy electrod
by: Khan, Ahsan Ali, et al.
Published: (2012)

Material Removal Rate and Surface Roughness on Grinding of Ductile Cast Iron Using Minimum Quantity Lubrication
by: M. M., Rahman, et al.
Published: (2015)

Investigation of the machinability of non-conductive zro2 with different tool electrodes in EDM
by: Moudood, M. A., et al.
Published: (2014)

Optimization of Machining Parameters on Tool Wear Rate of Ti-6Al-4V through EDM using Copper Tungsten Electrode A Statistical Approach
by: M. M., Rahman, et al.
Published: (2011)

Effect of discharge current and electrode size on material removal rate and wear ratio in electrical discharge machining / Ahsan Ali Khan, Mohammad Yeakub Ali and Md. Mohafizul Haque
by: Khan, Ahsan Ali, et al.
Published: (2010)

Reducing electrode wear using cryogenic cooling during electrical discharge machining
by: Abdulkareem, Suleiman, et al.
Published: (2010)

High discharge rate electrodeposited zinc electrode for use in alkaline microbattery
by: Nor Hairin, Assayidatul Laila, et al.
Published: (2011)