A comparative study on flank wear and work surface finish during high speed milling of cast iron with different carbide tools

Abstract. Tool life sharply reduced for all the carbide tools while increasing cutting speed twice (from 500m/min to 1000m/min) during machining cast iron. Though the productivity would be double at the speed of 1000m/min than that at the speed of 500m/min, tool wear increases to a few times which i...

Full description

Bibliographic Details
Main Authors:	Khan, Ahsan Ali, Aman Nor Rasid, Zuraida, Yusof, Izausmawati
Format:	Book Chapter
Language:	English
Published:	International Islamic University Malaysia 2011
Subjects:	TS200 Metal manufactures. Metalworking
Online Access:	http://irep.iium.edu.my/25559/ http://irep.iium.edu.my/25559/ http://irep.iium.edu.my/25559/2/Chapter_35.pdf

id	iium-25559
recordtype	eprints
spelling	iium-255592014-04-30T05:49:39Z http://irep.iium.edu.my/25559/ A comparative study on flank wear and work surface finish during high speed milling of cast iron with different carbide tools Khan, Ahsan Ali Aman Nor Rasid, Zuraida Yusof, Izausmawati TS200 Metal manufactures. Metalworking Abstract. Tool life sharply reduced for all the carbide tools while increasing cutting speed twice (from 500m/min to 1000m/min) during machining cast iron. Though the productivity would be double at the speed of 1000m/min than that at the speed of 500m/min, tool wear increases to a few times which indicates that the inserts used are not suitable for machining at a high speed like 1000m/min. It is better to cut cast iron using uncoated K20 carbide at low cutting speed rather than at high speed. TiAlN coated carbide has the best wear resistance at both speeds. International Islamic University Malaysia 2011 Book Chapter PeerReviewed application/pdf en http://irep.iium.edu.my/25559/2/Chapter_35.pdf Khan, Ahsan Ali and Aman Nor Rasid, Zuraida and Yusof, Izausmawati (2011) A comparative study on flank wear and work surface finish during high speed milling of cast iron with different carbide tools. In: Advanced Machining Processes. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 196-200. ISBN 9789674181628 http://rms.research.iium.edu.my/bookstore/default.aspx
repository_type	Digital Repository
institution_category	Local University
institution	International Islamic University Malaysia
building	IIUM Repository
collection	Online Access
language	English
topic	TS200 Metal manufactures. Metalworking
spellingShingle	TS200 Metal manufactures. Metalworking Khan, Ahsan Ali Aman Nor Rasid, Zuraida Yusof, Izausmawati A comparative study on flank wear and work surface finish during high speed milling of cast iron with different carbide tools
description	Abstract. Tool life sharply reduced for all the carbide tools while increasing cutting speed twice (from 500m/min to 1000m/min) during machining cast iron. Though the productivity would be double at the speed of 1000m/min than that at the speed of 500m/min, tool wear increases to a few times which indicates that the inserts used are not suitable for machining at a high speed like 1000m/min. It is better to cut cast iron using uncoated K20 carbide at low cutting speed rather than at high speed. TiAlN coated carbide has the best wear resistance at both speeds.
format	Book Chapter
author	Khan, Ahsan Ali Aman Nor Rasid, Zuraida Yusof, Izausmawati
author_facet	Khan, Ahsan Ali Aman Nor Rasid, Zuraida Yusof, Izausmawati
author_sort	Khan, Ahsan Ali
title	A comparative study on flank wear and work surface finish during high speed milling of cast iron with different carbide tools
title_short	A comparative study on flank wear and work surface finish during high speed milling of cast iron with different carbide tools
title_full	A comparative study on flank wear and work surface finish during high speed milling of cast iron with different carbide tools
title_fullStr	A comparative study on flank wear and work surface finish during high speed milling of cast iron with different carbide tools
title_full_unstemmed	A comparative study on flank wear and work surface finish during high speed milling of cast iron with different carbide tools
title_sort	comparative study on flank wear and work surface finish during high speed milling of cast iron with different carbide tools
publisher	International Islamic University Malaysia
publishDate	2011
url	http://irep.iium.edu.my/25559/ http://irep.iium.edu.my/25559/ http://irep.iium.edu.my/25559/2/Chapter_35.pdf
first_indexed	2023-09-18T20:38:05Z
last_indexed	2023-09-18T20:38:05Z
_version_	1777409180585426944

A comparative study on flank wear and work surface finish during high speed milling of cast iron with different carbide tools

Similar Items