Selection of cemented carbide turning tools using EMF and optimization criteria

Tool life and quality of surface finish of the workpiece influence production rate and production cost. Cemented carbide tools have found wide application in the production arena of Bangladesh. In the absence of any testing facility in the country for the selection of cost-effective tools, poor qual...

Full description

Bibliographic Details
Main Authors:	Amin, A. K. M. Nurul, Sarker, Md. Ruhul Amin, Ahmed, Mahiuddin, Karim, A.N. Mustafizul
Format:	Article
Language:	English
Published:	Elsevier 1998
Subjects:	T58.7 Production capacity. Manufacturing capacity
Online Access:	http://irep.iium.edu.my/26849/ http://irep.iium.edu.my/26849/1/Select_CC-Tools_main%235.pdf

id	iium-26849
recordtype	eprints
spelling	iium-268492013-07-19T02:56:10Z http://irep.iium.edu.my/26849/ Selection of cemented carbide turning tools using EMF and optimization criteria Amin, A. K. M. Nurul Sarker, Md. Ruhul Amin Ahmed, Mahiuddin Karim, A.N. Mustafizul T58.7 Production capacity. Manufacturing capacity Tool life and quality of surface finish of the workpiece influence production rate and production cost. Cemented carbide tools have found wide application in the production arena of Bangladesh. In the absence of any testing facility in the country for the selection of cost-effective tools, poor quality carbide tools are frequently imported. A testing method and a selection criteria were developed for testing carbide tools of different shapes and sizes and for selecting the most cost-effective tool. For each tool cutting tests were performed to generate tool life data under different cutting conditions. Mild steel served as the work material. The relationship between tool life and cutting speed was developed using a curve-fitting software on a PC. From these relationships the values of the constants of the Taylor’s equation were determined. The cost equation was then derived for each tool for a given amount of work in a cutting speed range. Finally, the most cost-effective tool was selected on the basis of the relative location of the cost curves of the tools tested. Elsevier 1998 Article PeerReviewed application/pdf en http://irep.iium.edu.my/26849/1/Select_CC-Tools_main%235.pdf Amin, A. K. M. Nurul and Sarker, Md. Ruhul Amin and Ahmed, Mahiuddin and Karim, A.N. Mustafizul (1998) Selection of cemented carbide turning tools using EMF and optimization criteria. Journal of Materials Processing Technology, 77. pp. 59-63. ISSN 0924-0136
repository_type	Digital Repository
institution_category	Local University
institution	International Islamic University Malaysia
building	IIUM Repository
collection	Online Access
language	English
topic	T58.7 Production capacity. Manufacturing capacity
spellingShingle	T58.7 Production capacity. Manufacturing capacity Amin, A. K. M. Nurul Sarker, Md. Ruhul Amin Ahmed, Mahiuddin Karim, A.N. Mustafizul Selection of cemented carbide turning tools using EMF and optimization criteria
description	Tool life and quality of surface finish of the workpiece influence production rate and production cost. Cemented carbide tools have found wide application in the production arena of Bangladesh. In the absence of any testing facility in the country for the selection of cost-effective tools, poor quality carbide tools are frequently imported. A testing method and a selection criteria were developed for testing carbide tools of different shapes and sizes and for selecting the most cost-effective tool. For each tool cutting tests were performed to generate tool life data under different cutting conditions. Mild steel served as the work material. The relationship between tool life and cutting speed was developed using a curve-fitting software on a PC. From these relationships the values of the constants of the Taylor’s equation were determined. The cost equation was then derived for each tool for a given amount of work in a cutting speed range. Finally, the most cost-effective tool was selected on the basis of the relative location of the cost curves of the tools tested.
format	Article
author	Amin, A. K. M. Nurul Sarker, Md. Ruhul Amin Ahmed, Mahiuddin Karim, A.N. Mustafizul
author_facet	Amin, A. K. M. Nurul Sarker, Md. Ruhul Amin Ahmed, Mahiuddin Karim, A.N. Mustafizul
author_sort	Amin, A. K. M. Nurul
title	Selection of cemented carbide turning tools using EMF and optimization criteria
title_short	Selection of cemented carbide turning tools using EMF and optimization criteria
title_full	Selection of cemented carbide turning tools using EMF and optimization criteria
title_fullStr	Selection of cemented carbide turning tools using EMF and optimization criteria
title_full_unstemmed	Selection of cemented carbide turning tools using EMF and optimization criteria
title_sort	selection of cemented carbide turning tools using emf and optimization criteria
publisher	Elsevier
publishDate	1998
url	http://irep.iium.edu.my/26849/ http://irep.iium.edu.my/26849/1/Select_CC-Tools_main%235.pdf
first_indexed	2023-09-18T20:39:55Z
last_indexed	2023-09-18T20:39:55Z
_version_	1777409296652304384

Selection of cemented carbide turning tools using EMF and optimization criteria

Similar Items