Influence of cutting tool angles on the formation of built-up-edge

This paper presents the results of investigating the effect of tool geometry on the formation of built-up-edge (BUE). Side cutting and rake angles of the cutting tool were chosen for the study. Initially the experiments were conducted by one-variable-at-a-time approach to identify the range of angl...

Full description

Bibliographic Details
Main Authors:	Hossain, Md. Bellal, Khan, Ahsan Ali, Karim, A.N. Mustafizul
Format:	Conference or Workshop Item
Language:	English
Published:	2000
Subjects:	T58.7 Production capacity. Manufacturing capacity
Online Access:	http://irep.iium.edu.my/26860/ http://irep.iium.edu.my/26860/1/Built_up_edge_%2306.pdf

id	iium-26860
recordtype	eprints
spelling	iium-268602013-09-02T08:39:26Z http://irep.iium.edu.my/26860/ Influence of cutting tool angles on the formation of built-up-edge Hossain, Md. Bellal Khan, Ahsan Ali Karim, A.N. Mustafizul T58.7 Production capacity. Manufacturing capacity This paper presents the results of investigating the effect of tool geometry on the formation of built-up-edge (BUE). Side cutting and rake angles of the cutting tool were chosen for the study. Initially the experiments were conducted by one-variable-at-a-time approach to identify the range of angles influencing BUE. Both the angles of the cutting tool were found to influence the BUE height. For a set value of the rake angle, a peak of BUE height was observed with the change of side cutting angle. An interactive effect of both the parameters of the tool geometry was observed on the formation of the BUE. An attempt was subsequently made to develop a model by adopting an approach of design of experiment. The model developed indicated that at higher range of the rake angle, the increase of side cutting angle would have very little influence on the height of BUE. But at lower rake angle (-15 to 15 deg) height of BUE was found to decrease rapidly with the increase of side cutting angle. For a set value of side cutting angle, the increase in rake angle of the tool would lead to increase in the height of BUE. 2000-02 Conference or Workshop Item PeerReviewed application/pdf en http://irep.iium.edu.my/26860/1/Built_up_edge_%2306.pdf Hossain, Md. Bellal and Khan, Ahsan Ali and Karim, A.N. Mustafizul (2000) Influence of cutting tool angles on the formation of built-up-edge. In: International Conference on Manufacturing (ICM 2000), 24-26 February, 2000, Dhaka.
repository_type	Digital Repository
institution_category	Local University
institution	International Islamic University Malaysia
building	IIUM Repository
collection	Online Access
language	English
topic	T58.7 Production capacity. Manufacturing capacity
spellingShingle	T58.7 Production capacity. Manufacturing capacity Hossain, Md. Bellal Khan, Ahsan Ali Karim, A.N. Mustafizul Influence of cutting tool angles on the formation of built-up-edge
description	This paper presents the results of investigating the effect of tool geometry on the formation of built-up-edge (BUE). Side cutting and rake angles of the cutting tool were chosen for the study. Initially the experiments were conducted by one-variable-at-a-time approach to identify the range of angles influencing BUE. Both the angles of the cutting tool were found to influence the BUE height. For a set value of the rake angle, a peak of BUE height was observed with the change of side cutting angle. An interactive effect of both the parameters of the tool geometry was observed on the formation of the BUE. An attempt was subsequently made to develop a model by adopting an approach of design of experiment. The model developed indicated that at higher range of the rake angle, the increase of side cutting angle would have very little influence on the height of BUE. But at lower rake angle (-15 to 15 deg) height of BUE was found to decrease rapidly with the increase of side cutting angle. For a set value of side cutting angle, the increase in rake angle of the tool would lead to increase in the height of BUE.
format	Conference or Workshop Item
author	Hossain, Md. Bellal Khan, Ahsan Ali Karim, A.N. Mustafizul
author_facet	Hossain, Md. Bellal Khan, Ahsan Ali Karim, A.N. Mustafizul
author_sort	Hossain, Md. Bellal
title	Influence of cutting tool angles on the formation of built-up-edge
title_short	Influence of cutting tool angles on the formation of built-up-edge
title_full	Influence of cutting tool angles on the formation of built-up-edge
title_fullStr	Influence of cutting tool angles on the formation of built-up-edge
title_full_unstemmed	Influence of cutting tool angles on the formation of built-up-edge
title_sort	influence of cutting tool angles on the formation of built-up-edge
publishDate	2000
url	http://irep.iium.edu.my/26860/ http://irep.iium.edu.my/26860/1/Built_up_edge_%2306.pdf
first_indexed	2023-09-18T20:39:57Z
last_indexed	2023-09-18T20:39:57Z
_version_	1777409298129747968

Influence of cutting tool angles on the formation of built-up-edge

Similar Items