Performance evaluation of zinc oxide varistor produced from powder under different spray drying conditions

I-V characteristics, wattloss behavior and energy absorption capability etc. are the critical characteristics for performance evaluation of ZnO varistors. In the long processing steps of this electro-ceramic with a considerable number of contributing variables, the preparation of pressing grade ele...

Full description

Bibliographic Details
Main Authors: Begum, Shahida, Karim, A.N. Mustafizul, Hashmi, M. S. J.
Format: Conference or Workshop Item
Language:English
Published: 2006
Subjects:
Online Access:http://irep.iium.edu.my/26871/
http://irep.iium.edu.my/26871/1/UM__Spray_dry%2314_.pdf
id iium-26871
recordtype eprints
spelling iium-268712016-07-28T05:27:52Z http://irep.iium.edu.my/26871/ Performance evaluation of zinc oxide varistor produced from powder under different spray drying conditions Begum, Shahida Karim, A.N. Mustafizul Hashmi, M. S. J. T Technology (General) T58.7 Production capacity. Manufacturing capacity I-V characteristics, wattloss behavior and energy absorption capability etc. are the critical characteristics for performance evaluation of ZnO varistors. In the long processing steps of this electro-ceramic with a considerable number of contributing variables, the preparation of pressing grade electro-ceramic materials is very important. It demands powders with high degree of compositional and microstructural homogeneity, high purity and reliability, proper shape and proper size and distribution. This kind of ceramic powder can be generated by spray drying. Apart from affecting the physical properties of varistor discs, the powder characteristics influence the grain growth and microstructure which are anticipated to affect the electrical behavior of the discs. To investigate this, varistor powder was produced from standard slurry under different spray drying conditions in pilot scale. Feed flow rate, atomizing air pressure and outlet drying air temperature were considered as input variables and nominal voltage, wattloss, clamp ratio, non-linear co-efficient and energy absorption capability were considered as response. It was found that nominal voltage, wattloss and energy absorption capability was highly influenced by spray drying variables but no significant influence was observed on clamp ratio and nonlinear co-efficient for both the pre-breakdown and breakdown region. Not only high but consistent energy absorption capability was achieved by optimizing spray drying conditions. Thus optimization of spray drying variables could help securing desirable varistor characteristics and enhanced reliability of the electrical system. 2006 Conference or Workshop Item PeerReviewed application/pdf en http://irep.iium.edu.my/26871/1/UM__Spray_dry%2314_.pdf Begum, Shahida and Karim, A.N. Mustafizul and Hashmi, M. S. J. (2006) Performance evaluation of zinc oxide varistor produced from powder under different spray drying conditions. In: 1st International Conference and 7th AUN/SEED - Field wise Seminar on Manufacturing Material Processing (ICMM2006), 14-16 March 2006, Kuala Lumpur.
repository_type Digital Repository
institution_category Local University
institution International Islamic University Malaysia
building IIUM Repository
collection Online Access
language English
topic T Technology (General)
T58.7 Production capacity. Manufacturing capacity
spellingShingle T Technology (General)
T58.7 Production capacity. Manufacturing capacity
Begum, Shahida
Karim, A.N. Mustafizul
Hashmi, M. S. J.
Performance evaluation of zinc oxide varistor produced from powder under different spray drying conditions
description I-V characteristics, wattloss behavior and energy absorption capability etc. are the critical characteristics for performance evaluation of ZnO varistors. In the long processing steps of this electro-ceramic with a considerable number of contributing variables, the preparation of pressing grade electro-ceramic materials is very important. It demands powders with high degree of compositional and microstructural homogeneity, high purity and reliability, proper shape and proper size and distribution. This kind of ceramic powder can be generated by spray drying. Apart from affecting the physical properties of varistor discs, the powder characteristics influence the grain growth and microstructure which are anticipated to affect the electrical behavior of the discs. To investigate this, varistor powder was produced from standard slurry under different spray drying conditions in pilot scale. Feed flow rate, atomizing air pressure and outlet drying air temperature were considered as input variables and nominal voltage, wattloss, clamp ratio, non-linear co-efficient and energy absorption capability were considered as response. It was found that nominal voltage, wattloss and energy absorption capability was highly influenced by spray drying variables but no significant influence was observed on clamp ratio and nonlinear co-efficient for both the pre-breakdown and breakdown region. Not only high but consistent energy absorption capability was achieved by optimizing spray drying conditions. Thus optimization of spray drying variables could help securing desirable varistor characteristics and enhanced reliability of the electrical system.
format Conference or Workshop Item
author Begum, Shahida
Karim, A.N. Mustafizul
Hashmi, M. S. J.
author_facet Begum, Shahida
Karim, A.N. Mustafizul
Hashmi, M. S. J.
author_sort Begum, Shahida
title Performance evaluation of zinc oxide varistor produced from powder under different spray drying conditions
title_short Performance evaluation of zinc oxide varistor produced from powder under different spray drying conditions
title_full Performance evaluation of zinc oxide varistor produced from powder under different spray drying conditions
title_fullStr Performance evaluation of zinc oxide varistor produced from powder under different spray drying conditions
title_full_unstemmed Performance evaluation of zinc oxide varistor produced from powder under different spray drying conditions
title_sort performance evaluation of zinc oxide varistor produced from powder under different spray drying conditions
publishDate 2006
url http://irep.iium.edu.my/26871/
http://irep.iium.edu.my/26871/1/UM__Spray_dry%2314_.pdf
first_indexed 2023-09-18T20:39:58Z
last_indexed 2023-09-18T20:39:58Z
_version_ 1777409299601948672