The tribological behaviour of Fe-C-Al cast iron – effect of temperature

The tribological behaviour of Fe-C-Al cast iron – effect of temperature

Purpose - The aim of this paper is to study the tribological behaviour of Fe-C-Al cast iron at different temperatures using universal pin-on-disk machine. Design/methodology/approach - The cold set resin bonded sand mould casting process was employed to develop Fe-C-Al cast iron and Fe-C-Si cast...

Full description

Bibliographic Details
Main Authors: Maleque, Md. Abdul, Sugrib , S.
Format: Article
Language:English
Published: Emerald Group Publishing Limited 2013
Subjects:
TN600 Metallurgy
Online Access:http://irep.iium.edu.my/26904/
http://irep.iium.edu.my/26904/
http://irep.iium.edu.my/26904/
http://irep.iium.edu.my/26904/1/The_tribological_behaviour_of_Fe-C-Al.pdf
id iium-26904
recordtype eprints
spelling iium-269042013-08-22T00:47:03Z http://irep.iium.edu.my/26904/ The tribological behaviour of Fe-C-Al cast iron – effect of temperature Maleque, Md. Abdul Sugrib , S. TN600 Metallurgy Purpose - The aim of this paper is to study the tribological behaviour of Fe-C-Al cast iron at different temperatures using universal pin-on-disk machine. Design/methodology/approach - The cold set resin bonded sand mould casting process was employed to develop Fe-C-Al cast iron and Fe-C-Si cast iron. The microstructures of materials were studied using field emission scanning electron microscope. The wear and friction tests were conducted using universal pin-on-disk machine at 25 0C, 100 0C, 200 0C and 300 0C temperature. The wear damage surface was characterized using scanning electron microscopy. Findings - The lower wear rate was found for Fe-C-Al cast iron compared to Fe-C-Si cast iron and delamination type wear morphology was observed in both types of cast iron materials. The results also showed that the friction coeficient value of Fe-C-Al cast iron was lower than Fe-C-Si cast iron at different temperature. It can be concluded that the overall tribological behaviour of Fe-C-Al cast iron at higher temperature was better than conventional Fe-C-Si cast iron. Originality/value - The information on the development and tribological properties of the Fe-C-Al cast iron at different temperatures is scare in literature. The special type of cold set resin bonded sand mould was used for casting this Fe-C-Al cast iron material. Therefore, current study is quite new and it is hoped that it will provide a high value to the automotive and other engineering researchers for the application of this material. Emerald Group Publishing Limited 2013 Article PeerReviewed application/pdf en http://irep.iium.edu.my/26904/1/The_tribological_behaviour_of_Fe-C-Al.pdf Maleque, Md. Abdul and Sugrib , S. (2013) The tribological behaviour of Fe-C-Al cast iron – effect of temperature. Industrial Lubrication and Tribology, 65 (5). pp. 320-327. ISSN 0036-8792 http://www.emeraldinsight.com/journals.htm?issn=0036-8792&volume=65&issue=5&articleid=17047086&show=abstract 10.1108/ILT-03-2011-0019
repository_type Digital Repository
institution_category Local University
institution International Islamic University Malaysia
building IIUM Repository
collection Online Access
language English
topic TN600 Metallurgy
spellingShingle TN600 Metallurgy
Maleque, Md. Abdul
Sugrib , S.
The tribological behaviour of Fe-C-Al cast iron – effect of temperature
description Purpose - The aim of this paper is to study the tribological behaviour of Fe-C-Al cast iron at different temperatures using universal pin-on-disk machine. Design/methodology/approach - The cold set resin bonded sand mould casting process was employed to develop Fe-C-Al cast iron and Fe-C-Si cast iron. The microstructures of materials were studied using field emission scanning electron microscope. The wear and friction tests were conducted using universal pin-on-disk machine at 25 0C, 100 0C, 200 0C and 300 0C temperature. The wear damage surface was characterized using scanning electron microscopy. Findings - The lower wear rate was found for Fe-C-Al cast iron compared to Fe-C-Si cast iron and delamination type wear morphology was observed in both types of cast iron materials. The results also showed that the friction coeficient value of Fe-C-Al cast iron was lower than Fe-C-Si cast iron at different temperature. It can be concluded that the overall tribological behaviour of Fe-C-Al cast iron at higher temperature was better than conventional Fe-C-Si cast iron. Originality/value - The information on the development and tribological properties of the Fe-C-Al cast iron at different temperatures is scare in literature. The special type of cold set resin bonded sand mould was used for casting this Fe-C-Al cast iron material. Therefore, current study is quite new and it is hoped that it will provide a high value to the automotive and other engineering researchers for the application of this material.
format Article
author Maleque, Md. Abdul
Sugrib , S.
author_facet Maleque, Md. Abdul
Sugrib , S.
author_sort Maleque, Md. Abdul
title The tribological behaviour of Fe-C-Al cast iron – effect of temperature
title_short The tribological behaviour of Fe-C-Al cast iron – effect of temperature
title_full The tribological behaviour of Fe-C-Al cast iron – effect of temperature
title_fullStr The tribological behaviour of Fe-C-Al cast iron – effect of temperature
title_full_unstemmed The tribological behaviour of Fe-C-Al cast iron – effect of temperature
title_sort tribological behaviour of fe-c-al cast iron – effect of temperature
publisher Emerald Group Publishing Limited
publishDate 2013
url http://irep.iium.edu.my/26904/
http://irep.iium.edu.my/26904/
http://irep.iium.edu.my/26904/
http://irep.iium.edu.my/26904/1/The_tribological_behaviour_of_Fe-C-Al.pdf
first_indexed 2023-09-18T20:40:02Z
last_indexed 2023-09-18T20:40:02Z
_version_ 1777409303583391744

Similar Items