Materials selection and design

Materials selection and design

Bibliographic Details
Main Authors:	Maleque, Md. Abdul, Salit, Mohd. Sapuan
Format:	Book
Language:	English
Published:	Springer 2013
Subjects:	TA401 Materials of engineering and construction TN600 Metallurgy
Online Access:	http://irep.iium.edu.my/35604/ http://irep.iium.edu.my/35604/ http://irep.iium.edu.my/35604/1/Proof_Reading_317822_1.pdf

Similar Items

Tribological behavior of dual and triple particle size SiC reinforced Al0MMCs: a comparative study
by: Maleque, Md. Abdul, et al.
Published: (2008)

Synthesis and characterization of Ni–P coated hexagonal boron nitride by electroless nickel deposition
by: Maleque, Md. Abdul
Published: (2015)

The effect of intercritical heat treatment on the mechanical properties of AISI 3115 steel
by: Maleque, Md. Abdul, et al.
Published: (2004)

Failure of woven fiber glass epoxy composite under charpy impact loading
by: Md Idriss, A. N., et al.
Published: (2012)

Performance assessment of aluminium composite material for automotive brake rotor
by: Maleque, Md. Abdul
Published: (2014)

Wear and corrosion of composite coated AISI 4340 steel exposed to jatropha curcas biodiesel
by: Maleque, Md. Abdul, et al.
Published: (2014)

Aluminum-silicon carbide composites for enhanced physio- mechanical properties
by: Debnath, Sujan, et al.
Published: (2012)

Aluminium-copper-SiCp composite materials corrosion in biodiesel
by: Maleque, Md. Abdul
Published: (2012)

Synthetic of pure alumina from aluminum scrap
by: Abdul Najib Khan, A. Shafiq Khan, et al.
Published: (2015)

Development And Characterization Of Coir Fibre Reinforced Composite Brake Friction Materials
by: Maleque, Md. Abdul, et al.
Published: (2013)

Wear mechanisms map of CNT-Al nano-composite
by: Abdullahi, U., et al.
Published: (2013)

Development of kenaf-glass reinforced unsaturated polyester hybrid composite for structural applications
by: Afdzaluddin, Atiqah, et al.
Published: (2014)

Fracture surface behaviour of Al-Mg-SiCp composite materials
by: Maleque, Md. Abdul, et al.
Published: (2016)

Composite brake rotor: energy savings and wear performance
by: Maleque, Md. Abdul
Published: (2015)

Surface modification of HSLA steel and its fracture behavior
by: Abdullrhman Hossin, Musa, et al.
Published: (2016)

Effect of temperature on the wear properties of alloy steel under jatropha curcas biodiesel
by: Shaufe, N. A., et al.
Published: (2015)

TIG melted surface modified titanium alloy for cylinder liner application
by: Adeleke, S. A., et al.
Published: (2015)

Energy saving and performance stability of silicon carbide reinforced aluminium composite automotive brake rotor
by: Maleque, Md. Abdul, et al.
Published: (2013)

Surface modification of duplex stainless steel with SiC preplacement using TIG torch cladding
by: Lailatul, P.H., et al.
Published: (2017)

Noble hybrid composite coated low alloy steel for high temperature applications
by: Maleque, Md. Abdul, et al.
Published: (2017)

Corrosion of surface modified AISI 4340 steel in jatropha biodiesel
by: Maleque, Md. Abdul, et al.
Published: (2015)

Novel activated Ni-P-hBN composite powder for efficient solid lubricant coating application
by: Maleque, Md. Abdul
Published: (2015)

Wear behaviour optimization of TIG parameters on wear behavior of sic embedded coatings using Taguchi approach
by: Maleque, Md. Abdul, et al.
Published: (2016)

Abrasive wear response of TIG-melted TiC composite coating: Taguchi approach
by: Maleque, Md. Abdul, et al.
Published: (2017)

Preparation and characterisation of TIG-alloyed hybrid composite coatings for high-temperature tribological applications
by: Bello, K. A., et al.
Published: (2016)

Effect of copper on tensile strength improvement of Al-Cu-SiCp new composite
by: Maleque, Md. Abdul, et al.
Published: (2014)

Lighter weight and energy efficient eco-siC composite for motorbike brake disc application
by: Maleque, Md. Abdul, et al.
Published: (2018)

Wear behaviour of TiC coated AISI 4340 steel produced by TIG surface melting
by: Maleque, Md. Abdul, et al.
Published: (2015)

Tribocorrosion behaviour of biodiesel
by: Maleque, Md. Abdul, et al.
Published: (2014)

Surface features of TIG melting coated CP-titanium
by: Adeleke, S.A., et al.
Published: (2015)

Tungsten inert gas surface alloying of commercial purity titanium (CP-Ti) with Fe-C-Si ternary mixtures
by: Adeleke, S.A., et al.
Published: (2014)

Prototype development of light weight aluminium matrix composite automotive brake rotor
by: Maleque, Md. Abdul, et al.
Published: (2017)

Erosion corrosion and tribological behavior of TIG torch composite layers
by: Maleque, Md. Abdul
Published: (2016)

Hard surface layer formation on duplex stainless steel using melting and diffusion processes: a review
by: Paijan, Lailatul Harina, et al.
Published: (2016)

Thin surface layers of iron-based alloys deposited by TIG hardfacing
by: Sakiru, Adeleke, et al.
Published: (2015)

Wear properties of SiC particulate preplaced TIG melted surface layered duplex stainless steel
by: Maleque, Md. Abdul
Published: (2018)

Morphology of cnt-al nanocomposite under different ball milling parameters
by: Maleque, Md. Abdul, et al.
Published: (2015)

Wear characteristics of multiple particle size silicon carbide reinforced aluminium composite
by: Abdulmumin, Adebisi Adetayo, et al.
Published: (2015)

Optimization of hardness behaviour of TIG modified ceramic coating using the taguchi approach
by: Bello, Kamilu Adeyemi, et al.
Published: (2015)

Synthesis of co-deposited hexagonal boron nitride for thermally-efficient tribological performance
by: Bello, Kamilu Adeyemi, et al.
Published: (2015)

Cannot write session to /tmp/vufind_sessions/sess_oio6cjrmb7dm3d06hrnpegbehc