Milling of carbon fibre reinforced polymer (CFRP) using TiAlN coated end mills

Milling of carbon fibre reinforced polymer (CFRP) using TiAlN coated end mills

This study was undertaken to investigate the influence of machining parameters on delamination of milled 3 mm-thick Carbon Fibre Reinforced Composite (CFRP) using 4 mm-diameter 2-fluted Titanium Aluminium Nitride (TiAlN) coated carbide end mills. Three machining parameters, rotation speed, feed rate...

Full description

Bibliographic Details
Main Authors: Konneh, Mohamed, Sudin, Izman, Abdullah, Kassim Abdulrahman
Format: Conference or Workshop Item
Language:English
Published: 2014
Subjects:
TJ1125 Machine shops and machine shop practice
Online Access:http://irep.iium.edu.my/39987/
http://irep.iium.edu.my/39987/
http://irep.iium.edu.my/39987/1/MILLING_OF_CARBON_FIBRE.pdf
id iium-39987
recordtype eprints
spelling iium-399872015-04-27T00:52:23Z http://irep.iium.edu.my/39987/ Milling of carbon fibre reinforced polymer (CFRP) using TiAlN coated end mills Konneh, Mohamed Sudin, Izman Abdullah, Kassim Abdulrahman TJ1125 Machine shops and machine shop practice This study was undertaken to investigate the influence of machining parameters on delamination of milled 3 mm-thick Carbon Fibre Reinforced Composite (CFRP) using 4 mm-diameter 2-fluted Titanium Aluminium Nitride (TiAlN) coated carbide end mills. Three machining parameters, rotation speed, feed rate and depth of cut were considered. The machining experiments were conducted on a Mikrotool DT-110 CNC micro machine based on Box-Behnken design of experiments and resulted into 17 runs. A DT 2336B Laser Tachometer was used to check the rotational speed prior to any trial run. Optical microscopy examination reveals minimum delamination value 4.05 at the condition of spindle speed (25,000 rpm), depth of cut (50µm) and feed rate (3 mm/min) and the maximum delamination value 5.04 mm at the condition of spindle speed (35000 rpm), depth of cut (150µm) and feed rate (9 mm/min). A mathematical model relating the milling parameters and delamination has been established. 2014 Conference or Workshop Item NonPeerReviewed application/pdf en http://irep.iium.edu.my/39987/1/MILLING_OF_CARBON_FIBRE.pdf Konneh, Mohamed and Sudin, Izman and Abdullah, Kassim Abdulrahman (2014) Milling of carbon fibre reinforced polymer (CFRP) using TiAlN coated end mills. In: International Conference on Innovative Trends in Multidisciplinary Academic Research (ITMAR 2014), 20th-21st October 2014, Istanbul, Turkey. http://www.globalilluminators.org/itmar-2014-istanbul/
repository_type Digital Repository
institution_category Local University
institution International Islamic University Malaysia
building IIUM Repository
collection Online Access
language English
topic TJ1125 Machine shops and machine shop practice
spellingShingle TJ1125 Machine shops and machine shop practice
Konneh, Mohamed
Sudin, Izman
Abdullah, Kassim Abdulrahman
Milling of carbon fibre reinforced polymer (CFRP) using TiAlN coated end mills
description This study was undertaken to investigate the influence of machining parameters on delamination of milled 3 mm-thick Carbon Fibre Reinforced Composite (CFRP) using 4 mm-diameter 2-fluted Titanium Aluminium Nitride (TiAlN) coated carbide end mills. Three machining parameters, rotation speed, feed rate and depth of cut were considered. The machining experiments were conducted on a Mikrotool DT-110 CNC micro machine based on Box-Behnken design of experiments and resulted into 17 runs. A DT 2336B Laser Tachometer was used to check the rotational speed prior to any trial run. Optical microscopy examination reveals minimum delamination value 4.05 at the condition of spindle speed (25,000 rpm), depth of cut (50µm) and feed rate (3 mm/min) and the maximum delamination value 5.04 mm at the condition of spindle speed (35000 rpm), depth of cut (150µm) and feed rate (9 mm/min). A mathematical model relating the milling parameters and delamination has been established.
format Conference or Workshop Item
author Konneh, Mohamed
Sudin, Izman
Abdullah, Kassim Abdulrahman
author_facet Konneh, Mohamed
Sudin, Izman
Abdullah, Kassim Abdulrahman
author_sort Konneh, Mohamed
title Milling of carbon fibre reinforced polymer (CFRP) using TiAlN coated end mills
title_short Milling of carbon fibre reinforced polymer (CFRP) using TiAlN coated end mills
title_full Milling of carbon fibre reinforced polymer (CFRP) using TiAlN coated end mills
title_fullStr Milling of carbon fibre reinforced polymer (CFRP) using TiAlN coated end mills
title_full_unstemmed Milling of carbon fibre reinforced polymer (CFRP) using TiAlN coated end mills
title_sort milling of carbon fibre reinforced polymer (cfrp) using tialn coated end mills
publishDate 2014
url http://irep.iium.edu.my/39987/
http://irep.iium.edu.my/39987/
http://irep.iium.edu.my/39987/1/MILLING_OF_CARBON_FIBRE.pdf
first_indexed 2023-09-18T20:57:24Z
last_indexed 2023-09-18T20:57:24Z
_version_ 1777410395748696064

Similar Items