Fabrication of dual- and single-layer piezo resistive micro cantilever sensor
In this paper, the fabrication of piezoresistive microcantilever (PRM) sensor was realized through the utilization of bulk micromachining technology. Through a sequence of photolithography and etching processes, the device fabrication is realized. The fabrication of two PRM designs, dual-layer and...
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Asian Research Publishing Network (ARPN)
2015
|
| Subjects: | |
| Online Access: | http://irep.iium.edu.my/44474/ http://irep.iium.edu.my/44474/ http://irep.iium.edu.my/44474/1/journal_ARPN_published.pdf |
| Summary: | In this paper, the fabrication of piezoresistive microcantilever (PRM) sensor was realized through the utilization
of bulk micromachining technology. Through a sequence of photolithography and etching processes, the device fabrication
is realized. The fabrication of two PRM designs, dual-layer and single-layer has opened up the opportunity for device
improvement especially in fabrication methods for simpler and reduced process steps. In single-layer design, the
fabrication at reduced process steps which offers simpler and reproducible device has been successfully realized. This
design offers simpler fabrication process by not only reducing the number of process steps but also eliminating the
common fabrication issues encountered in bulk micromachining technology. With the development of single-layer doped
silicon PRM sensor, the thermal strain issue, due to mismatch in coefficients of thermal expansion of multi-layered
structure is not an issue. The novelty of this work lies in the design itself, in which the single-layer dual leg design not only
simplifies the fabrication work, but also promotes an efficient current distribution along the piezoresistive dual-leg
structure which is integrated with Wheatstone bridge configuration. |
|---|