Anisotropic carbon nanotube for new type of angle sensor development
Vertically Aligned Carbon Nanotubes (VACNTs) has captured attention by the researchers because of their flexibility and other attractive engineering properties. They are promising to be used as a functional bulk material in MEMS as well [1]. VACNT array (CNT forest) is known to be the darkest mat...
| Main Authors: | , |
|---|---|
| Format: | Conference or Workshop Item |
| Language: | English |
| Published: |
2016
|
| Subjects: | |
| Online Access: | http://irep.iium.edu.my/52173/ http://irep.iium.edu.my/52173/ http://irep.iium.edu.my/52173/1/52173.pdf |
| id |
iium-52173 |
|---|---|
| recordtype |
eprints |
| spelling |
iium-521732018-05-22T01:00:13Z http://irep.iium.edu.my/52173/ Anisotropic carbon nanotube for new type of angle sensor development Saleh, Tanveer Abdul Muthalif, Asan Gani T Technology (General) Vertically Aligned Carbon Nanotubes (VACNTs) has captured attention by the researchers because of their flexibility and other attractive engineering properties. They are promising to be used as a functional bulk material in MEMS as well [1]. VACNT array (CNT forest) is known to be the darkest material on Earth because of their unique absorption index. However, this author has shown and explained that tip bent carbon nanotube forest can reflect light like mirror [2].This paper reports that selectively tip bent CNT forest act as an anisotropic mirror, and this property can be exploited to fabricate CNT-based flexible angle sensor that is first of its kind. In this report, we presented a method that can bend the tips of the CNT inside a VACNT array as described in Fig. 1(a). A rigid cylindrical tool rolls over the CNT forest to bend and align the CNTs in the direction of the tool motion. The alignment of the CNTs after process can be observed in Fig. 1(b). Later optical characterization was carried out (on the bent CNT zone) using a polarized laser source as explained in Fig. 1(c). It was observed that if we rotate the sample from 0 to 90 degree, the reflectance is decreasing; this is because the polarization reflection changes from along the nanotube to the perpendicular direction of the nanotubes which is also supported by the findings of Deheer et.al [3]. The result of this analysis is shown in Fig. 1(d). It can be seen that from 10-90 degree the graph is quite linear and the hysteresis of the curve is minimal. The average sensitivity was found to be 0.155%/degree rotation. This finding opens the gateway to fabricate a new CNT-based flexible and miniaturize angle sensor..... 2016-08-09 Conference or Workshop Item NonPeerReviewed application/pdf en http://irep.iium.edu.my/52173/1/52173.pdf Saleh, Tanveer and Abdul Muthalif, Asan Gani (2016) Anisotropic carbon nanotube for new type of angle sensor development. In: International Conference on Advances in Functional Materials (AFM 2016), 8th-11th Aug. 2016, Jeju Island, South Korea. (Unpublished) http://afm2016.functionalmaterials.org/ |
| repository_type |
Digital Repository |
| institution_category |
Local University |
| institution |
International Islamic University Malaysia |
| building |
IIUM Repository |
| collection |
Online Access |
| language |
English |
| topic |
T Technology (General) |
| spellingShingle |
T Technology (General) Saleh, Tanveer Abdul Muthalif, Asan Gani Anisotropic carbon nanotube for new type of angle sensor development |
| description |
Vertically Aligned Carbon Nanotubes (VACNTs) has captured attention by the researchers
because of their flexibility and other attractive engineering properties. They are promising to be
used as a functional bulk material in MEMS as well [1]. VACNT array (CNT forest) is known to
be the darkest material on Earth because of their unique absorption index. However, this author
has shown and explained that tip bent carbon nanotube forest can reflect light like mirror [2].This
paper reports that selectively tip bent CNT forest act as an anisotropic mirror, and this property
can be exploited to fabricate CNT-based flexible angle sensor that is first of its kind.
In this report, we presented a method that can bend the tips of the CNT inside a VACNT array as
described in Fig. 1(a). A rigid cylindrical tool rolls over the CNT forest to bend and align the
CNTs in the direction of the tool motion. The alignment of the CNTs after process can be
observed in Fig. 1(b). Later optical characterization was carried out (on the bent CNT zone)
using a polarized laser source as explained in Fig. 1(c). It was observed that if we rotate the
sample from 0 to 90 degree, the reflectance is decreasing; this is because the polarization
reflection changes from along the nanotube to the perpendicular direction of the nanotubes which
is also supported by the findings of Deheer et.al [3]. The result of this analysis is shown in Fig.
1(d). It can be seen that from 10-90 degree the graph is quite linear and the hysteresis of the
curve is minimal. The average sensitivity was found to be 0.155%/degree rotation. This finding
opens the gateway to fabricate a new CNT-based flexible and miniaturize angle sensor..... |
| format |
Conference or Workshop Item |
| author |
Saleh, Tanveer Abdul Muthalif, Asan Gani |
| author_facet |
Saleh, Tanveer Abdul Muthalif, Asan Gani |
| author_sort |
Saleh, Tanveer |
| title |
Anisotropic carbon nanotube for new type of angle sensor development |
| title_short |
Anisotropic carbon nanotube for new type of angle sensor development |
| title_full |
Anisotropic carbon nanotube for new type of angle sensor development |
| title_fullStr |
Anisotropic carbon nanotube for new type of angle sensor development |
| title_full_unstemmed |
Anisotropic carbon nanotube for new type of angle sensor development |
| title_sort |
anisotropic carbon nanotube for new type of angle sensor development |
| publishDate |
2016 |
| url |
http://irep.iium.edu.my/52173/ http://irep.iium.edu.my/52173/ http://irep.iium.edu.my/52173/1/52173.pdf |
| first_indexed |
2023-09-18T21:13:57Z |
| last_indexed |
2023-09-18T21:13:57Z |
| _version_ |
1777411437708181504 |