Concept of a programmable fixture for 3-Axis CNC

Concept of a programmable fixture for 3-Axis CNC

CNC machine is the one of the major reasons for industrial advancement in recent decades for its ability of producing accurate parts. The most common CNC machines are of 3-axis and adopted widely in the industrial sector. However, for producing more complicated parts 5-axis CNC machines are required...

Full description

Bibliographic Details
Main Authors: Ahmed Azmi, Mohamed Dalol, Saleh, Tanveer
Format: Article
Language:English
Published: Deer Hill Publications 2017
Subjects:
T Technology (General)
Online Access:http://irep.iium.edu.my/59054/
http://irep.iium.edu.my/59054/
http://irep.iium.edu.my/59054/1/27-282-2-PB.pdf
id iium-59054
recordtype eprints
spelling iium-590542018-01-12T07:31:21Z http://irep.iium.edu.my/59054/ Concept of a programmable fixture for 3-Axis CNC Ahmed Azmi, Mohamed Dalol Saleh, Tanveer T Technology (General) CNC machine is the one of the major reasons for industrial advancement in recent decades for its ability of producing accurate parts. The most common CNC machines are of 3-axis and adopted widely in the industrial sector. However, for producing more complicated parts 5-axis CNC machines are required. Although the introduction of the 5-axis machine came after the 3-axis CNC machine has established itself and many manufacturers did not make the move toward the newer model and its high pricing compared to the 3-axis model did not help either. In this time the development of a fixture or a platform to help transfer the 3-axis to a 5-axis to some degree. This paper discusses the concept of a programmable fixture that gives 3-axis CNC machine the freedom to act in similar manner as the 5-axis. The paper describes the mechanism with some initial results of the testing. Result showed that the platform moves in translation manner with an average error of 5.58 % and 7.303% average error for rotation movement Deer Hill Publications 2017-09-15 Article PeerReviewed application/pdf en http://irep.iium.edu.my/59054/1/27-282-2-PB.pdf Ahmed Azmi, Mohamed Dalol and Saleh, Tanveer (2017) Concept of a programmable fixture for 3-Axis CNC. International Journal of Engineering Materials and Manufacture, 2 (3). pp. 49-57. E-ISSN 0128-1852 http://deerhillpublishing.com/index.php/ijemm/index
repository_type Digital Repository
institution_category Local University
institution International Islamic University Malaysia
building IIUM Repository
collection Online Access
language English
topic T Technology (General)
spellingShingle T Technology (General)
Ahmed Azmi, Mohamed Dalol
Saleh, Tanveer
Concept of a programmable fixture for 3-Axis CNC
description CNC machine is the one of the major reasons for industrial advancement in recent decades for its ability of producing accurate parts. The most common CNC machines are of 3-axis and adopted widely in the industrial sector. However, for producing more complicated parts 5-axis CNC machines are required. Although the introduction of the 5-axis machine came after the 3-axis CNC machine has established itself and many manufacturers did not make the move toward the newer model and its high pricing compared to the 3-axis model did not help either. In this time the development of a fixture or a platform to help transfer the 3-axis to a 5-axis to some degree. This paper discusses the concept of a programmable fixture that gives 3-axis CNC machine the freedom to act in similar manner as the 5-axis. The paper describes the mechanism with some initial results of the testing. Result showed that the platform moves in translation manner with an average error of 5.58 % and 7.303% average error for rotation movement
format Article
author Ahmed Azmi, Mohamed Dalol
Saleh, Tanveer
author_facet Ahmed Azmi, Mohamed Dalol
Saleh, Tanveer
author_sort Ahmed Azmi, Mohamed Dalol
title Concept of a programmable fixture for 3-Axis CNC
title_short Concept of a programmable fixture for 3-Axis CNC
title_full Concept of a programmable fixture for 3-Axis CNC
title_fullStr Concept of a programmable fixture for 3-Axis CNC
title_full_unstemmed Concept of a programmable fixture for 3-Axis CNC
title_sort concept of a programmable fixture for 3-axis cnc
publisher Deer Hill Publications
publishDate 2017
url http://irep.iium.edu.my/59054/
http://irep.iium.edu.my/59054/
http://irep.iium.edu.my/59054/1/27-282-2-PB.pdf
first_indexed 2023-09-18T21:23:36Z
last_indexed 2023-09-18T21:23:36Z
_version_ 1777412044038864896

Similar Items