Effect of dipping number on the fabricated silica ceramic membranes via sol dip-coating method

Received 22 December 2016 Received in revised form 28 January 2017 Accepted 4 April 2017 Available online 21 April 2017 Membrane technologies have received high interest in the separation gas mixture. The ceramic inorganic membranes have possessed high permeability, excellent thermal, chemical and...

Full description

Bibliographic Details
Main Authors:	Kahlib, Nor Amyra Zulianey, Mohd Daud, Farah Diana, Mel, Maizirwan, Ahmad Azhar, Ahmad Zahirani, Hassan, Noor Azlina
Format:	Article
Language:	English
Published:	Penerbit Akademia Baru 2017
Subjects:	TA Engineering (General). Civil engineering (General) TA401 Materials of engineering and construction
Online Access:	http://irep.iium.edu.my/61008/ http://irep.iium.edu.my/61008/1/Effect%20of%20dipping%20number%20on%20the%20fabricated%20silica%20ceramic_paper%20published_amyra_2017.pdf

id	iium-61008
recordtype	eprints
spelling	iium-610082018-05-05T05:50:21Z http://irep.iium.edu.my/61008/ Effect of dipping number on the fabricated silica ceramic membranes via sol dip-coating method Kahlib, Nor Amyra Zulianey Mohd Daud, Farah Diana Mel, Maizirwan Ahmad Azhar, Ahmad Zahirani Hassan, Noor Azlina TA Engineering (General). Civil engineering (General) TA401 Materials of engineering and construction Received 22 December 2016 Received in revised form 28 January 2017 Accepted 4 April 2017 Available online 21 April 2017 Membrane technologies have received high interest in the separation gas mixture. The ceramic inorganic membranes have possessed high permeability, excellent thermal, chemical and mechanical stabilities compared to conventional polymer membranes. This work presents the fabrication of silica ceramic membrane by sol dip-coating method. The tubular support was dipped into the solution of tetrethylorthosilicate (TEOS), distilled water and ethanol with the addition of nitric acid as a catalyst. The fabricated silica membrane was then characterized by (Field Emission Scanning Electron Microscope) FESEM and (Fourier transform infrared spectroscopy) FTIR to determine structural and chemical properties at different dipping number. FESEM images indicate that the silica has been deposited on the surface fabricated ceramic membrane and penetrate into the pore walls. However, number of dipping did not affect the intensity peak of FTIR analysis. Penerbit Akademia Baru 2017-04 Article PeerReviewed application/pdf en http://irep.iium.edu.my/61008/1/Effect%20of%20dipping%20number%20on%20the%20fabricated%20silica%20ceramic_paper%20published_amyra_2017.pdf Kahlib, Nor Amyra Zulianey and Mohd Daud, Farah Diana and Mel, Maizirwan and Ahmad Azhar, Ahmad Zahirani and Hassan, Noor Azlina (2017) Effect of dipping number on the fabricated silica ceramic membranes via sol dip-coating method. Journal of Advanced Research in Applied Sciences and Engineering Technology, 7 (Issue 1). pp. 19-24. ISSN 2462-1943
repository_type	Digital Repository
institution_category	Local University
institution	International Islamic University Malaysia
building	IIUM Repository
collection	Online Access
language	English
topic	TA Engineering (General). Civil engineering (General) TA401 Materials of engineering and construction
spellingShingle	TA Engineering (General). Civil engineering (General) TA401 Materials of engineering and construction Kahlib, Nor Amyra Zulianey Mohd Daud, Farah Diana Mel, Maizirwan Ahmad Azhar, Ahmad Zahirani Hassan, Noor Azlina Effect of dipping number on the fabricated silica ceramic membranes via sol dip-coating method
description	Received 22 December 2016 Received in revised form 28 January 2017 Accepted 4 April 2017 Available online 21 April 2017 Membrane technologies have received high interest in the separation gas mixture. The ceramic inorganic membranes have possessed high permeability, excellent thermal, chemical and mechanical stabilities compared to conventional polymer membranes. This work presents the fabrication of silica ceramic membrane by sol dip-coating method. The tubular support was dipped into the solution of tetrethylorthosilicate (TEOS), distilled water and ethanol with the addition of nitric acid as a catalyst. The fabricated silica membrane was then characterized by (Field Emission Scanning Electron Microscope) FESEM and (Fourier transform infrared spectroscopy) FTIR to determine structural and chemical properties at different dipping number. FESEM images indicate that the silica has been deposited on the surface fabricated ceramic membrane and penetrate into the pore walls. However, number of dipping did not affect the intensity peak of FTIR analysis.
format	Article
author	Kahlib, Nor Amyra Zulianey Mohd Daud, Farah Diana Mel, Maizirwan Ahmad Azhar, Ahmad Zahirani Hassan, Noor Azlina
author_facet	Kahlib, Nor Amyra Zulianey Mohd Daud, Farah Diana Mel, Maizirwan Ahmad Azhar, Ahmad Zahirani Hassan, Noor Azlina
author_sort	Kahlib, Nor Amyra Zulianey
title	Effect of dipping number on the fabricated silica ceramic membranes via sol dip-coating method
title_short	Effect of dipping number on the fabricated silica ceramic membranes via sol dip-coating method
title_full	Effect of dipping number on the fabricated silica ceramic membranes via sol dip-coating method
title_fullStr	Effect of dipping number on the fabricated silica ceramic membranes via sol dip-coating method
title_full_unstemmed	Effect of dipping number on the fabricated silica ceramic membranes via sol dip-coating method
title_sort	effect of dipping number on the fabricated silica ceramic membranes via sol dip-coating method
publisher	Penerbit Akademia Baru
publishDate	2017
url	http://irep.iium.edu.my/61008/ http://irep.iium.edu.my/61008/1/Effect%20of%20dipping%20number%20on%20the%20fabricated%20silica%20ceramic_paper%20published_amyra_2017.pdf
first_indexed	2023-09-18T21:26:30Z
last_indexed	2023-09-18T21:26:30Z
_version_	1777412226933587968

Effect of dipping number on the fabricated silica ceramic membranes via sol dip-coating method

Similar Items