Passive control of base drag employing dimple in subsonic suddenly expanded flow

This paper presents an experimental and computational investigation to study the effectiveness of dimples to control the base pressure in Backward facing step (BFS) for various Nozzle pressure ratio (NPR) having Compressible flow to minimize the base drag. Two dimples of 3 mm diameter located at 180...

Full description

Bibliographic Details
Main Authors: Khan, Sher Afghan, Asad Ullah, Mohammed, Sadiq, Jafar
Format: Article
Language:English
English
Published: The International Journals of Engineering and Sciences (IJENS) 2018
Subjects:
Online Access:http://irep.iium.edu.my/64531/
http://irep.iium.edu.my/64531/
http://irep.iium.edu.my/64531/7/64531%20Passive%20Control%20of%20Base%20Drag%20Employing.pdf
http://irep.iium.edu.my/64531/13/64531_Passive%20control%20of%20base%20drag%20employing%20dimple%20in%20subsonic%20suddenly%20expanded%20flow_scopus.pdf
Description
Summary:This paper presents an experimental and computational investigation to study the effectiveness of dimples to control the base pressure in Backward facing step (BFS) for various Nozzle pressure ratio (NPR) having Compressible flow to minimize the base drag. Two dimples of 3 mm diameter located at 1800 interval along pitch circle diameter of 23 mm in the base region was employed as passive controls. The test was conducted for NPR 1.27, 1.38, 1.52 and 1.69. The model is designed in such a way so as to provide four BFS with angle of incidence as 150 from which the flow suddenly expands to a square duct of 25 mm. The experimental investigation is carried out for different length of duct 4D≤L≤10D to see the influence of geometric parameter on base pressure. From the present investigation, it was found that dimples as passive control is very effective at higher NPR and the wall pressure distribution too was quite stable at higher NPR. Also the geometric parameter was found to influence the base pressure for a particular NPR. Computational investigation using commercial CFD tool shows pressure and velocity distribution profile for both dimple and non-dimple control. Tests are carried out by using Navier-stokes equation, Turbulence model as SST, Reynolds number (Re) =122.56×103. From this investigation it is clear that for a given nozzle pressure ratio one can find optimum L/D ratio which will result in maximum increase/decrease of base pressure and dimples can be effective passive controller for reducing base drag without disturbing the flow field.