Development of International Islamic University Malaysia-Micro Aerial Vehicle (IIUM-MAV)
In this project the first IIUM-Micro Aerial Vehicle (IIUM-MAV) model was successfully designed, built and tested by team from the Department of Mechanical Engineering, IIUM. Problems related to stability, weight management, component selection, and thrust to weight ratio were faced during the ea...
| Main Authors: | , |
|---|---|
| Format: | Conference or Workshop Item |
| Language: | English |
| Published: |
2009
|
| Subjects: | |
| Online Access: | http://irep.iium.edu.my/6528/ http://irep.iium.edu.my/6528/ http://irep.iium.edu.my/6528/1/ |
| Summary: | In this project the first IIUM-Micro Aerial Vehicle
(IIUM-MAV) model was successfully designed, built and tested
by team from the Department of Mechanical Engineering, IIUM.
Problems related to stability, weight management, component
selection, and thrust to weight ratio were faced during the early development of models, namely MAV1 to MAV5. Those
problems were solved with the flying wing configuration
incorporated into the latest models, i.e. MAV6 and MAV7. The
span dimensions for the IIUM-MAV6 and -MAV7 were, 1 m and
0.5 m, respectively. The total weight of MAV6 is 197 grams, while MAV7 is 157 grams. The foam was the main material used to construct the IIUM-MAV. The electric micro R/C engine with maximum weight of 19 grams and maximum power output of 80 W was used. Both MAV6 and MAV7 were successfully tested and flew. The performance of MAV7 had been proven to be better than MAV6 in term of stability and maneuverability. |
|---|