Enhancement of electrode design for non-invasive stimulus application

Existing electrodes can be classified into two categories which are invasive and non-invasive electrodes. The non-invasive electrodes can be further classified into wet or dry electrodes. Most of the off-the-shelf electrodes are made from rigid substrates which have the high level of motion artifact...

Full description

Bibliographic Details
Main Authors:	Azman, Amelia Wong, Mohd Ariff, Siti, Azman, Muhammad Farhan, Mohd. Ramli, Huda Adibah
Format:	Conference or Workshop Item
Language:	English English
Published:	Institute of Electrical and Electronics Engineers Inc. 2018
Subjects:	TK4601 Electric heating
Online Access:	http://irep.iium.edu.my/70100/ http://irep.iium.edu.my/70100/ http://irep.iium.edu.my/70100/ http://irep.iium.edu.my/70100/1/70100_Enhancement%20of%20electrode%20design_SCOPUS.pdf http://irep.iium.edu.my/70100/7/70100_Enhancement%20of%20electrode%20design%20for%20non-invasive.pdf

id	iium-70100
recordtype	eprints
spelling	iium-701002019-01-28T01:01:38Z http://irep.iium.edu.my/70100/ Enhancement of electrode design for non-invasive stimulus application Azman, Amelia Wong Mohd Ariff, Siti Azman, Muhammad Farhan Mohd. Ramli, Huda Adibah TK4601 Electric heating Existing electrodes can be classified into two categories which are invasive and non-invasive electrodes. The non-invasive electrodes can be further classified into wet or dry electrodes. Most of the off-the-shelf electrodes are made from rigid substrates which have the high level of motion artifacts. To overcome this motion artifact, flexible electrodes have been slowly introduced in the market. Flexible electrodes can be made from various types of material such as the substrate. This paper presents a work on designing a new flexible dry electrodes using poly(3,4-ethylenedioxythiophene) polystyrene sulfonate and silver by means of dispenser printing technology. Polyester cotton fabric was selected as the substrate in this electrode designed. Results from the experiment show that the conductivity of the proposed flexible electrode is comparable with the conventional pre-gelled electrode when applied to an electrical stimulator device. Eight out of ten subjects under test described no difference in comfort between the proposed electrodes and pre-gelled electrodes. © 2017 IEEE. Institute of Electrical and Electronics Engineers Inc. 2018 Conference or Workshop Item PeerReviewed application/pdf en http://irep.iium.edu.my/70100/1/70100_Enhancement%20of%20electrode%20design_SCOPUS.pdf application/pdf en http://irep.iium.edu.my/70100/7/70100_Enhancement%20of%20electrode%20design%20for%20non-invasive.pdf Azman, Amelia Wong and Mohd Ariff, Siti and Azman, Muhammad Farhan and Mohd. Ramli, Huda Adibah (2018) Enhancement of electrode design for non-invasive stimulus application. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA) 2017, 28th-30th November 2017, Putrajaya. https://ieeexplore.ieee.org/document/8311988/authors#authors 10.1109/ICSIMA.2017.8311988
repository_type	Digital Repository
institution_category	Local University
institution	International Islamic University Malaysia
building	IIUM Repository
collection	Online Access
language	English English
topic	TK4601 Electric heating
spellingShingle	TK4601 Electric heating Azman, Amelia Wong Mohd Ariff, Siti Azman, Muhammad Farhan Mohd. Ramli, Huda Adibah Enhancement of electrode design for non-invasive stimulus application
description	Existing electrodes can be classified into two categories which are invasive and non-invasive electrodes. The non-invasive electrodes can be further classified into wet or dry electrodes. Most of the off-the-shelf electrodes are made from rigid substrates which have the high level of motion artifacts. To overcome this motion artifact, flexible electrodes have been slowly introduced in the market. Flexible electrodes can be made from various types of material such as the substrate. This paper presents a work on designing a new flexible dry electrodes using poly(3,4-ethylenedioxythiophene) polystyrene sulfonate and silver by means of dispenser printing technology. Polyester cotton fabric was selected as the substrate in this electrode designed. Results from the experiment show that the conductivity of the proposed flexible electrode is comparable with the conventional pre-gelled electrode when applied to an electrical stimulator device. Eight out of ten subjects under test described no difference in comfort between the proposed electrodes and pre-gelled electrodes. © 2017 IEEE.
format	Conference or Workshop Item
author	Azman, Amelia Wong Mohd Ariff, Siti Azman, Muhammad Farhan Mohd. Ramli, Huda Adibah
author_facet	Azman, Amelia Wong Mohd Ariff, Siti Azman, Muhammad Farhan Mohd. Ramli, Huda Adibah
author_sort	Azman, Amelia Wong
title	Enhancement of electrode design for non-invasive stimulus application
title_short	Enhancement of electrode design for non-invasive stimulus application
title_full	Enhancement of electrode design for non-invasive stimulus application
title_fullStr	Enhancement of electrode design for non-invasive stimulus application
title_full_unstemmed	Enhancement of electrode design for non-invasive stimulus application
title_sort	enhancement of electrode design for non-invasive stimulus application
publisher	Institute of Electrical and Electronics Engineers Inc.
publishDate	2018
url	http://irep.iium.edu.my/70100/ http://irep.iium.edu.my/70100/ http://irep.iium.edu.my/70100/ http://irep.iium.edu.my/70100/1/70100_Enhancement%20of%20electrode%20design_SCOPUS.pdf http://irep.iium.edu.my/70100/7/70100_Enhancement%20of%20electrode%20design%20for%20non-invasive.pdf
first_indexed	2023-09-18T21:39:31Z
last_indexed	2023-09-18T21:39:31Z
_version_	1777413046299262976

Enhancement of electrode design for non-invasive stimulus application

Similar Items