The effect of dolomite addition onto the phases and hardness of zirconia toughened alumina
Zirconia toughened alumina (ZTA) is one of the composite ceramics that are widely use in load bearing and wear resistant applications. The composite is known for their good hardness and toughness, due to the presence of both Al2O3 and yttria stabilized zirconia (YSZ). The enhance toughness for ZTA...
Main Authors: | , , , |
---|---|
Format: | Conference or Workshop Item |
Language: | English English English |
Published: |
American Institute of Physics Inc.
2019
|
Subjects: | |
Online Access: | http://irep.iium.edu.my/73221/ http://irep.iium.edu.my/73221/ http://irep.iium.edu.my/73221/ http://irep.iium.edu.my/73221/1/73221_The%20Effect%20of%20Dolomite%20Addition_complete.pdf http://irep.iium.edu.my/73221/2/73221_The%20Effect%20of%20Dolomite%20Addition_scopus.pdf http://irep.iium.edu.my/73221/13/73221_The%20Effect%20of%20Dolomite%20Addition_wos.pdf |
Summary: | Zirconia toughened alumina (ZTA) is one of the composite ceramics that are widely use in load bearing and
wear resistant applications. The composite is known for their good hardness and toughness, due to the presence of both
Al2O3 and yttria stabilized zirconia (YSZ). The enhance toughness for ZTA are mostly originated from the presence of
YSZ in the composite. The phase transformation from tetragonal to monoclinic that happen inside of YSZ during the
presence of stress and increase its toughness. Thus, the amount of tetragonal and monoclinic phase inside of YSZ are critital
to its toughness. In this research, the amount of dolomite was varied from 0 to 1.0 wt % while ratio of Al2O3 to YSZ were
fixed to 4:1. The sample were prepared through the solid-state sintering method. XRD was done onto the sample to analyze
the phases. XRD analysis shows that no presence of new compound in ZTA system. With addition 0.3 wt% of dolomite,
Vickers hardness reached maximum of 1842.75HV. |
---|