A study of parameters relationship to backcutting phenomena during high speed end milling of AISI H13

Problem Statement: In die and mold industries, surface roughness of the dies and molds produced will determined the end product quality. Therefore, the desired finish surface was specified and the appropriate processes were selected to reach the required quality. Among many contributors to surface q...

Full description

Bibliographic Details
Main Authors:	Adesta, Erry Yulian Triblas, Mohd Ali, Afifah, Agusman, Delvis, Muhammad, Riza, Suprianto, Mohamad Yuhan
Format:	Article
Language:	English
Published:	Science Publications 2010
Subjects:	TS200 Metal manufactures. Metalworking
Online Access:	http://irep.iium.edu.my/7409/ http://irep.iium.edu.my/7409/1/AJASSP.2010.1420.1425.pdf

id	iium-7409
recordtype	eprints
spelling	iium-74092011-11-29T10:45:05Z http://irep.iium.edu.my/7409/ A study of parameters relationship to backcutting phenomena during high speed end milling of AISI H13 Adesta, Erry Yulian Triblas Mohd Ali, Afifah Agusman, Delvis Muhammad, Riza Suprianto, Mohamad Yuhan TS200 Metal manufactures. Metalworking Problem Statement: In die and mold industries, surface roughness of the dies and molds produced will determined the end product quality. Therefore, the desired finish surface was specified and the appropriate processes were selected to reach the required quality. Among many contributors to surface quality problem, backcutting is one of the factors influencing the surface roughness. Approach: The aim for current research was to study the backcutting phenomena and their effect to the surface roughness of work material, AISI H13 with hardness of 48 HRC during high speed end milling. Machining performed on the Vertical Milling Centre (VMC) high cutting speed from 150-250 m/min, feed rate 0.005-0.15 mm/tooth and depth of cut 0.1-0.5mm. The analysis and observations of the backcutting phenomena are done by using optical surface roughness machines. Results: The result shown that pattern of surface roughness was not sufficient enough to compare between the surface with backcutting and without backcutting phenomena were seen mostly in combination of medium to high speed and medium to high feedrate. Conclusion/Recommendations: Futher research is needed with incrimination of experiments and adjustments of parameters. Science Publications 2010 Article PeerReviewed application/pdf en http://irep.iium.edu.my/7409/1/AJASSP.2010.1420.1425.pdf Adesta, Erry Yulian Triblas and Mohd Ali, Afifah and Agusman, Delvis and Muhammad, Riza and Suprianto, Mohamad Yuhan (2010) A study of parameters relationship to backcutting phenomena during high speed end milling of AISI H13. American Journal of Applied Sciences , 7 (10). pp. 1420-1425. ISSN 1554-3641(O), 1546-9239 (P)
repository_type	Digital Repository
institution_category	Local University
institution	International Islamic University Malaysia
building	IIUM Repository
collection	Online Access
language	English
topic	TS200 Metal manufactures. Metalworking
spellingShingle	TS200 Metal manufactures. Metalworking Adesta, Erry Yulian Triblas Mohd Ali, Afifah Agusman, Delvis Muhammad, Riza Suprianto, Mohamad Yuhan A study of parameters relationship to backcutting phenomena during high speed end milling of AISI H13
description	Problem Statement: In die and mold industries, surface roughness of the dies and molds produced will determined the end product quality. Therefore, the desired finish surface was specified and the appropriate processes were selected to reach the required quality. Among many contributors to surface quality problem, backcutting is one of the factors influencing the surface roughness. Approach: The aim for current research was to study the backcutting phenomena and their effect to the surface roughness of work material, AISI H13 with hardness of 48 HRC during high speed end milling. Machining performed on the Vertical Milling Centre (VMC) high cutting speed from 150-250 m/min, feed rate 0.005-0.15 mm/tooth and depth of cut 0.1-0.5mm. The analysis and observations of the backcutting phenomena are done by using optical surface roughness machines. Results: The result shown that pattern of surface roughness was not sufficient enough to compare between the surface with backcutting and without backcutting phenomena were seen mostly in combination of medium to high speed and medium to high feedrate. Conclusion/Recommendations: Futher research is needed with incrimination of experiments and adjustments of parameters.
format	Article
author	Adesta, Erry Yulian Triblas Mohd Ali, Afifah Agusman, Delvis Muhammad, Riza Suprianto, Mohamad Yuhan
author_facet	Adesta, Erry Yulian Triblas Mohd Ali, Afifah Agusman, Delvis Muhammad, Riza Suprianto, Mohamad Yuhan
author_sort	Adesta, Erry Yulian Triblas
title	A study of parameters relationship to backcutting phenomena during high speed end milling of AISI H13
title_short	A study of parameters relationship to backcutting phenomena during high speed end milling of AISI H13
title_full	A study of parameters relationship to backcutting phenomena during high speed end milling of AISI H13
title_fullStr	A study of parameters relationship to backcutting phenomena during high speed end milling of AISI H13
title_full_unstemmed	A study of parameters relationship to backcutting phenomena during high speed end milling of AISI H13
title_sort	study of parameters relationship to backcutting phenomena during high speed end milling of aisi h13
publisher	Science Publications
publishDate	2010
url	http://irep.iium.edu.my/7409/ http://irep.iium.edu.my/7409/1/AJASSP.2010.1420.1425.pdf
first_indexed	2023-09-18T20:16:47Z
last_indexed	2023-09-18T20:16:47Z
_version_	1777407840482230272

A study of parameters relationship to backcutting phenomena during high speed end milling of AISI H13

Similar Items