Fabrication of CuSiC composite by powder metallurgy route
Copper-based composite now is a potential material for various applications, while powder metallurgy processing technique is an alternative for high temperature processing materials and net shape component. In this research, Cu-based composite containing 10-50 vol% SiC fibers was fabricated by emplo...
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Trans Tech Publications Ltd., Switzerland
2011
|
| Subjects: | |
| Online Access: | http://irep.iium.edu.my/8638/ http://irep.iium.edu.my/8638/ http://irep.iium.edu.my/8638/ http://irep.iium.edu.my/8638/1/AGUS_-_Advanced_Materials_Research_2011_-_1.pdf |
| Summary: | Copper-based composite now is a potential material for various applications, while powder metallurgy processing technique is an alternative for high temperature processing materials and net shape component. In this research, Cu-based composite containing 10-50 vol% SiC fibers was fabricated by employing the powder metallurgy route. The mixtures of SiC fibers and Cu particles were blended in a ball milling machine with the addition of ethanol at 150rpm. Then, the mixtures were uniaxially compacted into a ɸ13.5mm cylindrical pallet and followed by sintering in vacuum furnace from 800-950°C for 4 hours. The density of the composite decrease with increasing SiCf and density as high as 87% for 10vol% SiCf/Cu matrix sintered at 800°C had been achieved. The Vickers hardness of 774MPa also had been achieved for 10vol% SiCf/Cu matrix but sintered at 900°C. |
|---|