Design and fabrication of a robotic arm for material handling / P Nageswara Rao ... [et al.]
The commercial robots are expensive for use in the educational institutions. The operation of them will not leave room for experimentation, which is necessary in an educational institution. Further a large number of components that can be used for building a robot are readily available in the market...
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Institute of Research, Development and Commercialisation (IRDC)
2005
|
| Subjects: | |
| Online Access: | http://ir.uitm.edu.my/id/eprint/12805/ http://ir.uitm.edu.my/id/eprint/12805/1/AJ_P%20NAGESWARA%20RAO%20SRJ%2005%201.pdf |
| Summary: | The commercial robots are expensive for use in the educational institutions. The operation of them will not leave room for experimentation, which is necessary in an educational institution. Further a large number of components that can be used for building a robot are readily available in the market. Hence this project has been taken up to allow us to build a working robot
using as many of the off the shelf components to provide the necessary flexibility. This would make it a low cost robot with enough flexibility for the students to experiment the various functions of the robot. |
|---|