Preparation and characterization of pvc based polymer electrolytes for proton batteries / Siti Khatijah Deraman

Searching a new material for the development of proton conducting polymer electrolytes that can be used in protonic electrochemical cells is the focus of this research study. In this study, the proton conducting polymer electrolytes were prepared by solution cast technique. Poly (vinyl chloride) PVC...

Full description

Bibliographic Details
Main Author:	Deraman, Siti Khatijah
Format:	Thesis
Language:	English
Published:	2014
Online Access:	http://ir.uitm.edu.my/id/eprint/16324/ http://ir.uitm.edu.my/id/eprint/16324/1/ABS_SITI%20KHATIJAH%20DERAMAN%20TDRA%20VOL%207%20IGS%2015.pdf

id	uitm-16324
recordtype	eprints
spelling	uitm-163242018-10-02T03:55:50Z http://ir.uitm.edu.my/id/eprint/16324/ Preparation and characterization of pvc based polymer electrolytes for proton batteries / Siti Khatijah Deraman Deraman, Siti Khatijah Searching a new material for the development of proton conducting polymer electrolytes that can be used in protonic electrochemical cells is the focus of this research study. In this study, the proton conducting polymer electrolytes were prepared by solution cast technique. Poly (vinyl chloride) PVC is used as the polymer host, ammonium triflate (NH₄CF₃S0₃) as the doping salt and ethylene carbonate (EC) and butyltrimethyl ammonium bis trifluoromethyl sulfonyl imide (Bu₃MeNTf₂N) is used as the plasticizers. Characterization techniques of EIS, XRD, FTIR, FESEM, DSC, TGA, transference number and linear sweep voltammetry measurements were used to study the properties of the PVC based proton conducting polymer electrolytes. Pure PVC exhibits room temperature ionic conductivity of 1.55 x 10¯¹⁰ S cm⁻¹. Various combinations of PVC and NH₄CF₃S0₃ compositions were attempted and the highest conductivity achieved was 2.50 x 10¯⁷S cm⁻¹ when 30 wt. % NH₄CF₃S0₃ (A4) was incorporated into PVC which is an increase of about three orders of magnitude, The increase in conductivity with addition of NH₄CF₃S0₃ is attributed to increase in number of mobile ions and decrease in crystallinity of the films as shown by XRD, FESEM and DSC results. A further increase in ionic conductivity is observed when the polymer-salt electrolyte with the highest conductivity (A4) was added with plasticizers EC and BU₃MeNTf₂N. The highest ionic conductivity achieved was 3.06 x 10-5 S cm-1when 5 wt. % of EC (B1) was incorporated to the A4 polymer electrolyte. When 15 wt. % BU₃MeNTf₂N (C3) was added to the A4 polymer electrolyte, the highest ionic conductivity achieved was 1.56 x 10⁻⁴ S cm⁻¹.Temperature dependence of conductivity study showed that conductivity increased with temperature and is found to obey the Arrhenius relationship. XRD studies showed that amorphous PVC becomes largely amorphous in nature upon addition of NH₄CF₃S0₃. Largely amorphous in nature is also obtained upon addition of EC and BU₃MeNTf₂N to PVC- NH₄CF₃S0₃. The degree of crystallinity, Xc is obtained by DSC and showed that the plasticized system has lower fraction of crystallinity compared to the salted systems with BU₃MeNTf₂N plasticized system having concentration of 15 wt. % (C3) having the least crystallinity. The transference number of this electrolyte is found to be 0.82 while its electrochemical window stability is 1.8 V. Electrochemical cells were fabricated using C3 electrolytes. The cells were discharged at different loads of 1.5 kΩ, 62 kΩ and 95 kΩ. The OCV of a cell based on the highest conducting electrolyte with configuration: Zn+ZnS0₄.7H₂O+PTFE I 85 wt. % (PVC-NH₄CF₃S0₃) +15 wt. % BU₃MeNTf₂N (C3) I MnO₂+PTFE is ~ 1.52 V while its discharge capacity is 0.55 mA h. The discharge performance of the cells showed that the protonic polymer electrolyte film proposed in this work has potential for application in protonic electrochemical cells for proton battery. 2014 Thesis NonPeerReviewed text en http://ir.uitm.edu.my/id/eprint/16324/1/ABS_SITI%20KHATIJAH%20DERAMAN%20TDRA%20VOL%207%20IGS%2015.pdf Deraman, Siti Khatijah (2014) Preparation and characterization of pvc based polymer electrolytes for proton batteries / Siti Khatijah Deraman. PhD thesis, Universiti Teknologi MARA.
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Teknologi MARA
building	UiTM Institutional Repository
collection	Online Access
language	English
description	Searching a new material for the development of proton conducting polymer electrolytes that can be used in protonic electrochemical cells is the focus of this research study. In this study, the proton conducting polymer electrolytes were prepared by solution cast technique. Poly (vinyl chloride) PVC is used as the polymer host, ammonium triflate (NH₄CF₃S0₃) as the doping salt and ethylene carbonate (EC) and butyltrimethyl ammonium bis trifluoromethyl sulfonyl imide (Bu₃MeNTf₂N) is used as the plasticizers. Characterization techniques of EIS, XRD, FTIR, FESEM, DSC, TGA, transference number and linear sweep voltammetry measurements were used to study the properties of the PVC based proton conducting polymer electrolytes. Pure PVC exhibits room temperature ionic conductivity of 1.55 x 10¯¹⁰ S cm⁻¹. Various combinations of PVC and NH₄CF₃S0₃ compositions were attempted and the highest conductivity achieved was 2.50 x 10¯⁷S cm⁻¹ when 30 wt. % NH₄CF₃S0₃ (A4) was incorporated into PVC which is an increase of about three orders of magnitude, The increase in conductivity with addition of NH₄CF₃S0₃ is attributed to increase in number of mobile ions and decrease in crystallinity of the films as shown by XRD, FESEM and DSC results. A further increase in ionic conductivity is observed when the polymer-salt electrolyte with the highest conductivity (A4) was added with plasticizers EC and BU₃MeNTf₂N. The highest ionic conductivity achieved was 3.06 x 10-5 S cm-1when 5 wt. % of EC (B1) was incorporated to the A4 polymer electrolyte. When 15 wt. % BU₃MeNTf₂N (C3) was added to the A4 polymer electrolyte, the highest ionic conductivity achieved was 1.56 x 10⁻⁴ S cm⁻¹.Temperature dependence of conductivity study showed that conductivity increased with temperature and is found to obey the Arrhenius relationship. XRD studies showed that amorphous PVC becomes largely amorphous in nature upon addition of NH₄CF₃S0₃. Largely amorphous in nature is also obtained upon addition of EC and BU₃MeNTf₂N to PVC- NH₄CF₃S0₃. The degree of crystallinity, Xc is obtained by DSC and showed that the plasticized system has lower fraction of crystallinity compared to the salted systems with BU₃MeNTf₂N plasticized system having concentration of 15 wt. % (C3) having the least crystallinity. The transference number of this electrolyte is found to be 0.82 while its electrochemical window stability is 1.8 V. Electrochemical cells were fabricated using C3 electrolytes. The cells were discharged at different loads of 1.5 kΩ, 62 kΩ and 95 kΩ. The OCV of a cell based on the highest conducting electrolyte with configuration: Zn+ZnS0₄.7H₂O+PTFE I 85 wt. % (PVC-NH₄CF₃S0₃) +15 wt. % BU₃MeNTf₂N (C3) I MnO₂+PTFE is ~ 1.52 V while its discharge capacity is 0.55 mA h. The discharge performance of the cells showed that the protonic polymer electrolyte film proposed in this work has potential for application in protonic electrochemical cells for proton battery.
format	Thesis
author	Deraman, Siti Khatijah
spellingShingle	Deraman, Siti Khatijah Preparation and characterization of pvc based polymer electrolytes for proton batteries / Siti Khatijah Deraman
author_facet	Deraman, Siti Khatijah
author_sort	Deraman, Siti Khatijah
title	Preparation and characterization of pvc based polymer electrolytes for proton batteries / Siti Khatijah Deraman
title_short	Preparation and characterization of pvc based polymer electrolytes for proton batteries / Siti Khatijah Deraman
title_full	Preparation and characterization of pvc based polymer electrolytes for proton batteries / Siti Khatijah Deraman
title_fullStr	Preparation and characterization of pvc based polymer electrolytes for proton batteries / Siti Khatijah Deraman
title_full_unstemmed	Preparation and characterization of pvc based polymer electrolytes for proton batteries / Siti Khatijah Deraman
title_sort	preparation and characterization of pvc based polymer electrolytes for proton batteries / siti khatijah deraman
publishDate	2014
url	http://ir.uitm.edu.my/id/eprint/16324/ http://ir.uitm.edu.my/id/eprint/16324/1/ABS_SITI%20KHATIJAH%20DERAMAN%20TDRA%20VOL%207%20IGS%2015.pdf
first_indexed	2023-09-18T22:55:48Z
last_indexed	2023-09-18T22:55:48Z
_version_	1777417845662023680

Preparation and characterization of pvc based polymer electrolytes for proton batteries / Siti Khatijah Deraman

Similar Items