Process optimization and characterization of nanostructured zinc oxide thin films for solar cell applications / Mohd Zainizan Sahdan

Recently, nanotechnology is employed in chemical synthesis of zinc oxide (ZnO) to produce novel nanostructured ZnO thin films. This new material synthesis technique could enhance the electrical and optical properties which can be applied for window layer application in solar cells. Although there ar...

Full description

Bibliographic Details
Main Author:	Sahdan, Mohd Zainizan
Format:	Book Section
Language:	English
Published:	Institute of Graduate Studies, UiTM 2013
Subjects:	Dissertations, Academic. Preparation of theses Chemical engineering
Online Access:	http://ir.uitm.edu.my/id/eprint/18993/ http://ir.uitm.edu.my/id/eprint/18993/1/ABS_MOHD%20ZAINIZAN%20SAHDAN%20TDRA%20VOL%203%20IGS%2013.pdf

id	uitm-18993
recordtype	eprints
spelling	uitm-189932018-06-07T02:07:21Z http://ir.uitm.edu.my/id/eprint/18993/ Process optimization and characterization of nanostructured zinc oxide thin films for solar cell applications / Mohd Zainizan Sahdan Sahdan, Mohd Zainizan Dissertations, Academic. Preparation of theses Chemical engineering Recently, nanotechnology is employed in chemical synthesis of zinc oxide (ZnO) to produce novel nanostructured ZnO thin films. This new material synthesis technique could enhance the electrical and optical properties which can be applied for window layer application in solar cells. Although there are many chemically synthesis methods available, thermal chemical vapor deposition (CVD) method offers ZnO purity up to 99% and high quality films. However, to produce uniform and repeatable nanostructured ZnO thin film using double furnaces thermal CVD is very challenging and almost impossible. Therefore, a novel method using a gas blocker to synthesize ZnO nanowires was introduced in this thesis. As a result, uniform and repeatable nanostructured ZnO thin films were successfully deposited on ITO coated glass assisted with gold catalyst. The resulting crystallite size is around 32 nm and nanowire length around 5 μm. Since the electrical and optical properties of nanostructured ZnO are strongly dependent on the thin film’s quality, the crystallinity of the thin films was enhanced by post annealing. Annealing the films at 550°C for 1 hour has produced optimum crytallinity in (0 0 2) crystal orientation. Another parameter which affects the structural and growth intensity is the carrier gas flow rate. It was found that using 0.75 L/min of gas flow rate had produced smoother nanostructured ZnO surface morphology and more growth on (0 0 2) plane. However, the transmittance in the visible region is only 65% with film thickness approximately 630 nm. This low transmittance is resulted from the gold catalyst which absorbs light at visible region. Therefore, ZnO seed layer was deposited and optimized to enhance the (0 0 2) crystal orientation and substitute the gold catalyst. As a result,catalyst-free nanostructured ZnO thin film was fabricated and the transmittance improved to more than 80%. However, the conductivity decreased to 1.82 x 10-3 S.cm-1. The fabrication of nanostructured ZnObased heterojunction thin film solar cell was realized by depositing new p-type material (InxSnyS thin film) on nanostructured ZnO thin film using electrochemical deposition (ECD) method. A solar simulator was used to measure the current-voltage (I-V) characteristics of the solar cell using indium metal as the electrodes. It was obtained that the solar cell has energy conversion efficiency (h) of 0.041% with short circuit current density of 181 μA.cm-2 and open circuit voltage of 0.47 V. The field factor (F.F) of the solar cell is approximately 0.476, with maximum current density of 150 A.cm-2 and maximum voltage of 0.27 V. This finding proves that nanostructured ZnO thin film successfully functioned as a window layer. It also proved that nanostructured ZnO can be synthesized without using metal catalyst which degrades the optical properties of the thin films. However, further research should be undertaken especially to synthesize p-type materials which are more suitable with ZnO. Institute of Graduate Studies, UiTM 2013 Book Section PeerReviewed text en http://ir.uitm.edu.my/id/eprint/18993/1/ABS_MOHD%20ZAINIZAN%20SAHDAN%20TDRA%20VOL%203%20IGS%2013.pdf Sahdan, Mohd Zainizan (2013) Process optimization and characterization of nanostructured zinc oxide thin films for solar cell applications / Mohd Zainizan Sahdan. In: THE DOCTORAL RESEARCH ABSTRACTS. IPSis Biannual Publication, 3 (3). Institute of Graduate Studies, UiTM, Shah Alam.
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Teknologi MARA
building	UiTM Institutional Repository
collection	Online Access
language	English
topic	Dissertations, Academic. Preparation of theses Chemical engineering
spellingShingle	Dissertations, Academic. Preparation of theses Chemical engineering Sahdan, Mohd Zainizan Process optimization and characterization of nanostructured zinc oxide thin films for solar cell applications / Mohd Zainizan Sahdan
description	Recently, nanotechnology is employed in chemical synthesis of zinc oxide (ZnO) to produce novel nanostructured ZnO thin films. This new material synthesis technique could enhance the electrical and optical properties which can be applied for window layer application in solar cells. Although there are many chemically synthesis methods available, thermal chemical vapor deposition (CVD) method offers ZnO purity up to 99% and high quality films. However, to produce uniform and repeatable nanostructured ZnO thin film using double furnaces thermal CVD is very challenging and almost impossible. Therefore, a novel method using a gas blocker to synthesize ZnO nanowires was introduced in this thesis. As a result, uniform and repeatable nanostructured ZnO thin films were successfully deposited on ITO coated glass assisted with gold catalyst. The resulting crystallite size is around 32 nm and nanowire length around 5 μm. Since the electrical and optical properties of nanostructured ZnO are strongly dependent on the thin film’s quality, the crystallinity of the thin films was enhanced by post annealing. Annealing the films at 550°C for 1 hour has produced optimum crytallinity in (0 0 2) crystal orientation. Another parameter which affects the structural and growth intensity is the carrier gas flow rate. It was found that using 0.75 L/min of gas flow rate had produced smoother nanostructured ZnO surface morphology and more growth on (0 0 2) plane. However, the transmittance in the visible region is only 65% with film thickness approximately 630 nm. This low transmittance is resulted from the gold catalyst which absorbs light at visible region. Therefore, ZnO seed layer was deposited and optimized to enhance the (0 0 2) crystal orientation and substitute the gold catalyst. As a result,catalyst-free nanostructured ZnO thin film was fabricated and the transmittance improved to more than 80%. However, the conductivity decreased to 1.82 x 10-3 S.cm-1. The fabrication of nanostructured ZnObased heterojunction thin film solar cell was realized by depositing new p-type material (InxSnyS thin film) on nanostructured ZnO thin film using electrochemical deposition (ECD) method. A solar simulator was used to measure the current-voltage (I-V) characteristics of the solar cell using indium metal as the electrodes. It was obtained that the solar cell has energy conversion efficiency (h) of 0.041% with short circuit current density of 181 μA.cm-2 and open circuit voltage of 0.47 V. The field factor (F.F) of the solar cell is approximately 0.476, with maximum current density of 150 A.cm-2 and maximum voltage of 0.27 V. This finding proves that nanostructured ZnO thin film successfully functioned as a window layer. It also proved that nanostructured ZnO can be synthesized without using metal catalyst which degrades the optical properties of the thin films. However, further research should be undertaken especially to synthesize p-type materials which are more suitable with ZnO.
format	Book Section
author	Sahdan, Mohd Zainizan
author_facet	Sahdan, Mohd Zainizan
author_sort	Sahdan, Mohd Zainizan
title	Process optimization and characterization of nanostructured zinc oxide thin films for solar cell applications / Mohd Zainizan Sahdan
title_short	Process optimization and characterization of nanostructured zinc oxide thin films for solar cell applications / Mohd Zainizan Sahdan
title_full	Process optimization and characterization of nanostructured zinc oxide thin films for solar cell applications / Mohd Zainizan Sahdan
title_fullStr	Process optimization and characterization of nanostructured zinc oxide thin films for solar cell applications / Mohd Zainizan Sahdan
title_full_unstemmed	Process optimization and characterization of nanostructured zinc oxide thin films for solar cell applications / Mohd Zainizan Sahdan
title_sort	process optimization and characterization of nanostructured zinc oxide thin films for solar cell applications / mohd zainizan sahdan
publisher	Institute of Graduate Studies, UiTM
publishDate	2013
url	http://ir.uitm.edu.my/id/eprint/18993/ http://ir.uitm.edu.my/id/eprint/18993/1/ABS_MOHD%20ZAINIZAN%20SAHDAN%20TDRA%20VOL%203%20IGS%2013.pdf
first_indexed	2023-09-18T23:01:37Z
last_indexed	2023-09-18T23:01:37Z
_version_	1777418211472441344

Process optimization and characterization of nanostructured zinc oxide thin films for solar cell applications / Mohd Zainizan Sahdan

Similar Items