Effect of varying resin content and board densities on the properties of three layers particleboard from kelempayan. / Tuan Mohd Fakrul Tuan Ismail
The aim of this study was to investigate the use of Kelempayan species in manufacturing three layer particleboard panels. The boards were fabricated with three different densities (500 kg/m3 , 600 kg/m3 and 700 kg/m3 ). The sample also has different type of the resin content (8 %, 10 % and 12 %...
| Main Author: | |
|---|---|
| Format: | Student Project |
| Language: | English |
| Published: |
Faculty of Applied Sciences
2015
|
| Subjects: | |
| Online Access: | http://ir.uitm.edu.my/id/eprint/19983/ http://ir.uitm.edu.my/id/eprint/19983/1/PPb_TUAN%20MOHD%20FAKRUL%20RAZIE%20TUAN%20ISMA%20AS%20C%2015_5.pdf.PDF |
| id |
uitm-19983 |
|---|---|
| recordtype |
eprints |
| spelling |
uitm-199832019-02-04T07:04:44Z http://ir.uitm.edu.my/id/eprint/19983/ Effect of varying resin content and board densities on the properties of three layers particleboard from kelempayan. / Tuan Mohd Fakrul Tuan Ismail Tuan Ismail, Tuan Mohd Fakrul Plant gene isolation S Agriculture (General) The aim of this study was to investigate the use of Kelempayan species in manufacturing three layer particleboard panels. The boards were fabricated with three different densities (500 kg/m3 , 600 kg/m3 and 700 kg/m3 ). The sample also has different type of the resin content (8 %, 10 % and 12 %). The boards produced was evaluated for its modulus of rupture (MOR), modulus of elasticity (MOE), internal bond (IS), water absorption (VVA) and thickness swelling (TS) in accordance with the Japan industry Standards (JIS) A 5908:2003. The result show passed standard value based on JIS A 5908:2003 Type 13 for mechanical properties is density 600 kg/m3 with resin 12 %, the result shown in MOR (14.94 MPa) and IS (0.29 MPa). For density 700 kg/m3 with resin 8 % and 10 % only pass in MOR and IS but for resin 12 %, the all mechanical properties passed the standard value of JIS. For physical properties, only pass in thickness swelling (11.90 %) with density 600 kg/m3 and 12 % resin content. It is concluded that the boards with the density of 700 kg/m3 were able to fulfill the Japan Industry Standards specifications. Faculty of Applied Sciences 2015 Student Project NonPeerReviewed text en http://ir.uitm.edu.my/id/eprint/19983/1/PPb_TUAN%20MOHD%20FAKRUL%20RAZIE%20TUAN%20ISMA%20AS%20C%2015_5.pdf.PDF Tuan Ismail, Tuan Mohd Fakrul (2015) Effect of varying resin content and board densities on the properties of three layers particleboard from kelempayan. / Tuan Mohd Fakrul Tuan Ismail. [Student Project] (Unpublished) |
| repository_type |
Digital Repository |
| institution_category |
Local University |
| institution |
Universiti Teknologi MARA |
| building |
UiTM Institutional Repository |
| collection |
Online Access |
| language |
English |
| topic |
Plant gene isolation S Agriculture (General) |
| spellingShingle |
Plant gene isolation S Agriculture (General) Tuan Ismail, Tuan Mohd Fakrul Effect of varying resin content and board densities on the properties of three layers particleboard from kelempayan. / Tuan Mohd Fakrul Tuan Ismail |
| description |
The aim of this study was to investigate the use of Kelempayan species in
manufacturing three layer particleboard panels. The boards were fabricated
with three different densities (500 kg/m3
, 600 kg/m3 and 700 kg/m3
). The
sample also has different type of the resin content (8 %, 10 % and 12 %).
The boards produced was evaluated for its modulus of rupture
(MOR), modulus of elasticity (MOE), internal bond (IS), water absorption (VVA)
and thickness swelling (TS) in accordance with the Japan industry Standards
(JIS) A 5908:2003. The result show passed standard value based on JIS A
5908:2003 Type 13 for mechanical properties is density 600 kg/m3 with
resin 12 %, the result shown in MOR (14.94 MPa) and IS (0.29 MPa). For
density 700 kg/m3 with resin 8 % and 10 % only pass in MOR and IS but for
resin 12 %, the all mechanical properties passed the standard value of JIS.
For physical properties, only pass in thickness swelling (11.90 %) with
density 600 kg/m3 and 12 % resin content. It is concluded that the boards
with the density of 700 kg/m3 were able to fulfill the Japan Industry Standards
specifications. |
| format |
Student Project |
| author |
Tuan Ismail, Tuan Mohd Fakrul |
| author_facet |
Tuan Ismail, Tuan Mohd Fakrul |
| author_sort |
Tuan Ismail, Tuan Mohd Fakrul |
| title |
Effect of varying resin content and board
densities on the properties of three layers
particleboard from kelempayan. / Tuan Mohd Fakrul Tuan Ismail |
| title_short |
Effect of varying resin content and board
densities on the properties of three layers
particleboard from kelempayan. / Tuan Mohd Fakrul Tuan Ismail |
| title_full |
Effect of varying resin content and board
densities on the properties of three layers
particleboard from kelempayan. / Tuan Mohd Fakrul Tuan Ismail |
| title_fullStr |
Effect of varying resin content and board
densities on the properties of three layers
particleboard from kelempayan. / Tuan Mohd Fakrul Tuan Ismail |
| title_full_unstemmed |
Effect of varying resin content and board
densities on the properties of three layers
particleboard from kelempayan. / Tuan Mohd Fakrul Tuan Ismail |
| title_sort |
effect of varying resin content and board
densities on the properties of three layers
particleboard from kelempayan. / tuan mohd fakrul tuan ismail |
| publisher |
Faculty of Applied Sciences |
| publishDate |
2015 |
| url |
http://ir.uitm.edu.my/id/eprint/19983/ http://ir.uitm.edu.my/id/eprint/19983/1/PPb_TUAN%20MOHD%20FAKRUL%20RAZIE%20TUAN%20ISMA%20AS%20C%2015_5.pdf.PDF |
| first_indexed |
2023-09-18T23:03:43Z |
| last_indexed |
2023-09-18T23:03:43Z |
| _version_ |
1777418343134789632 |