Screw withdrawal properties of glue-laminated timber made from kelampayan and sesendok / Nur Aisah Sajali
Glue-laminated timbers were produced using two species, Kelampayan and Sesendok. Polyvinyl Acetate (PVAc) were used as binder for glue-laminated timber manufacturing. The screws with same diameter and length that were 3.5mm and 50mm respectively but have different angle and distance of pitch wer...
| Main Author: | |
|---|---|
| Format: | Student Project |
| Language: | English |
| Published: |
Faculty of Applied Sciences
2015
|
| Subjects: | |
| Online Access: | http://ir.uitm.edu.my/id/eprint/20180/ http://ir.uitm.edu.my/id/eprint/20180/2/PPb_NUR%20AISAH%20SAJALI%20AS%20C%2015_5.pdf |
| id |
uitm-20180 |
|---|---|
| recordtype |
eprints |
| spelling |
uitm-201802018-11-02T07:22:43Z http://ir.uitm.edu.my/id/eprint/20180/ Screw withdrawal properties of glue-laminated timber made from kelampayan and sesendok / Nur Aisah Sajali Sajali, Nur Aisah Epoxy compounds Plant physiology Glue-laminated timbers were produced using two species, Kelampayan and Sesendok. Polyvinyl Acetate (PVAc) were used as binder for glue-laminated timber manufacturing. The screws with same diameter and length that were 3.5mm and 50mm respectively but have different angle and distance of pitch were used. The test position was selected at the surface, front and side. According to test result, it was found that both of pitches of screws are suitable for Kelampayan species. In side position, Kelampayan species showed the best screw holding strength and this result is followed by Sesendok species. In surface position, Pitch 2 has highest withdrawal strength on the Kelampayan species. In all position, Pitch 1 is suitable for Sesendok species and Pitch 2 is suitable for Kelampayan species. In both of pitch, Kelampayan got higher withdrawal strength compared to Sesendok Faculty of Applied Sciences 2015 Student Project NonPeerReviewed text en http://ir.uitm.edu.my/id/eprint/20180/2/PPb_NUR%20AISAH%20SAJALI%20AS%20C%2015_5.pdf Sajali, Nur Aisah (2015) Screw withdrawal properties of glue-laminated timber made from kelampayan and sesendok / Nur Aisah Sajali. [Student Project] (Unpublished) |
| repository_type |
Digital Repository |
| institution_category |
Local University |
| institution |
Universiti Teknologi MARA |
| building |
UiTM Institutional Repository |
| collection |
Online Access |
| language |
English |
| topic |
Epoxy compounds Plant physiology |
| spellingShingle |
Epoxy compounds Plant physiology Sajali, Nur Aisah Screw withdrawal properties of glue-laminated timber made from kelampayan and sesendok / Nur Aisah Sajali |
| description |
Glue-laminated timbers were produced using two species, Kelampayan and
Sesendok. Polyvinyl Acetate (PVAc) were used as binder for glue-laminated
timber manufacturing. The screws with same diameter and length that were
3.5mm and 50mm respectively but have different angle and distance of pitch
were used. The test position was selected at the surface, front and side.
According to test result, it was found that both of pitches of screws are
suitable for Kelampayan species. In side position, Kelampayan species
showed the best screw holding strength and this result is followed by
Sesendok species. In surface position, Pitch 2 has highest withdrawal
strength on the Kelampayan species. In all position, Pitch 1 is suitable for
Sesendok species and Pitch 2 is suitable for Kelampayan species. In both of
pitch, Kelampayan got higher withdrawal strength compared to Sesendok |
| format |
Student Project |
| author |
Sajali, Nur Aisah |
| author_facet |
Sajali, Nur Aisah |
| author_sort |
Sajali, Nur Aisah |
| title |
Screw withdrawal properties of glue-laminated timber
made from kelampayan and sesendok / Nur Aisah Sajali |
| title_short |
Screw withdrawal properties of glue-laminated timber
made from kelampayan and sesendok / Nur Aisah Sajali |
| title_full |
Screw withdrawal properties of glue-laminated timber
made from kelampayan and sesendok / Nur Aisah Sajali |
| title_fullStr |
Screw withdrawal properties of glue-laminated timber
made from kelampayan and sesendok / Nur Aisah Sajali |
| title_full_unstemmed |
Screw withdrawal properties of glue-laminated timber
made from kelampayan and sesendok / Nur Aisah Sajali |
| title_sort |
screw withdrawal properties of glue-laminated timber
made from kelampayan and sesendok / nur aisah sajali |
| publisher |
Faculty of Applied Sciences |
| publishDate |
2015 |
| url |
http://ir.uitm.edu.my/id/eprint/20180/ http://ir.uitm.edu.my/id/eprint/20180/2/PPb_NUR%20AISAH%20SAJALI%20AS%20C%2015_5.pdf |
| first_indexed |
2023-09-18T23:04:06Z |
| last_indexed |
2023-09-18T23:04:06Z |
| _version_ |
1777418367911591936 |