Assessing an accuracy of [UAV mappping] in detail plan production / Siti Najwa Mohd Sakri
Assessing the accuracy of UAV mapping in detail plan production. The main purpose this project to assessing the comparison between UAV and conventional mapping for Kg Gong Manok, Pasir Puteh, Kelantan. The mapping of topographic using ground based surveying techniques is sometimes consuming and prob...
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English |
| Published: |
2018
|
| Subjects: | |
| Online Access: | http://ir.uitm.edu.my/id/eprint/21854/ http://ir.uitm.edu.my/id/eprint/21854/1/TD_SITI%20NAJWA%20MOHD%20SAKRI%20AP%20R%2018_5.pdf |
| Summary: | Assessing the accuracy of UAV mapping in detail plan production. The main purpose this project to assessing the comparison between UAV and conventional mapping for Kg Gong Manok, Pasir Puteh, Kelantan. The mapping of topographic using ground based surveying techniques is sometimes consuming and problematic. Recently, the flight of UAVs operates with high degrees of autonomy by the global position system and on-board digit camera and computer. Unmanned Aerial Vehicles (UAV) technology has revolutionized the aerial photogrammetric mapping due to its low cost and high spatial resolution. It enables mapping the land use with greater accuracy in both 2D and 3D. The “DJI Phantom 4 Pro”drone was selected as the UAV platform to acquire image data. The UAV-based mapping can be obtained faster and cheaper, but its accuracy is anxious. In this study, we have developed a fully automated and highly accurate engineering approach for detecting land use , which is based on textural information from orthophoto and elevation information (Digital Surface Models) obtained from the drone. The Agisoft software was used to develop the orthophoto and a Digital Surface Model (DSM) and the DSM was validated by using the ground control points. |
|---|