Strength properties of single pin dowel joint on oil palm lumber / Sheikh Muhammad Shauqi Kamal Sheikh Osman
T-shape joints are widely used in furniture part installation. It's commonly applied in chair or desk for its rail or stretcher. The strength of structural part in furniture depends on how strong the joints can absorb the impact or can hold the load for a period of time. To identify the perf...
| Main Author: | |
|---|---|
| Format: | Student Project |
| Language: | English |
| Published: |
Faculty of Applied Sciences
2016
|
| Subjects: | |
| Online Access: | http://ir.uitm.edu.my/id/eprint/22621/ http://ir.uitm.edu.my/id/eprint/22621/1/PPb_SHEIKH%20MUHAMMAD%20SHAUQI%20KAMAL%20SHEIKH%20OSMAN%20AS%20C%2016_5.PDF |
| id |
uitm-22621 |
|---|---|
| recordtype |
eprints |
| spelling |
uitm-226212019-02-04T08:31:22Z http://ir.uitm.edu.my/id/eprint/22621/ Strength properties of single pin dowel joint on oil palm lumber / Sheikh Muhammad Shauqi Kamal Sheikh Osman Sheikh Osman, Sheikh Muhammad Shauqi Kamal Biotechnology Oils, fats, and waxes T-shape joints are widely used in furniture part installation. It's commonly applied in chair or desk for its rail or stretcher. The strength of structural part in furniture depends on how strong the joints can absorb the impact or can hold the load for a period of time. To identify the performance of joints it's necessary to study the potential of joints with a specified strength to enhance the weakest joint system. The objective of this research was to study the performance of joints by using three different diameter sizes (6mm), (8mm), (10mm) and adhesive, Poly Vinyl Acetate (PVAc) and Epoxy. This is to determine either the three size diameter of dowel with different glue, PVAc and Epoxy can give significant effect the (OPT), if these sizes and glue used are significant, it will save the furniture production in terms of is cost. The testing result was analyzed using SPSS. The result analyzed using ANOVA through Duncan's Multiple Range Test (DMRT). The results shows that for both adhesive no significant value for two testing. It was determined when P-value is > 0.05. According to ANOVA, bending test Glue, recorded their P-value are P=0.167 for Maximum Load (2.026) for the tensile P-value are P=0.137 for Maximum load (2.368). For Dowel sizes bending test P-value are P=0.007 for Maximum Load (6.193), P=0.009 for Tensile at Break and Maximum Load (5.851). Based on this result, all dowel size has highly significant strength for all testing compare with adhesive used PVAc and Epoxy not significant, from that used of PVAc on Tshape joint is better because PVAc low price compare to the Epoxy Faculty of Applied Sciences 2016 Student Project NonPeerReviewed text en http://ir.uitm.edu.my/id/eprint/22621/1/PPb_SHEIKH%20MUHAMMAD%20SHAUQI%20KAMAL%20SHEIKH%20OSMAN%20AS%20C%2016_5.PDF Sheikh Osman, Sheikh Muhammad Shauqi Kamal (2016) Strength properties of single pin dowel joint on oil palm lumber / Sheikh Muhammad Shauqi Kamal Sheikh Osman. [Student Project] (Unpublished) |
| repository_type |
Digital Repository |
| institution_category |
Local University |
| institution |
Universiti Teknologi MARA |
| building |
UiTM Institutional Repository |
| collection |
Online Access |
| language |
English |
| topic |
Biotechnology Oils, fats, and waxes |
| spellingShingle |
Biotechnology Oils, fats, and waxes Sheikh Osman, Sheikh Muhammad Shauqi Kamal Strength properties of single pin dowel joint on oil palm lumber / Sheikh Muhammad Shauqi Kamal Sheikh Osman |
| description |
T-shape joints are widely used in furniture part installation. It's commonly
applied in chair or desk for its rail or stretcher. The strength of structural part in
furniture depends on how strong the joints can absorb the impact or can hold
the load for a period of time. To identify the performance of joints it's necessary
to study the potential of joints with a specified strength to enhance the weakest
joint system. The objective of this research was to study the performance of
joints by using three different diameter sizes (6mm), (8mm), (10mm) and
adhesive, Poly Vinyl Acetate (PVAc) and Epoxy. This is to determine either the
three size diameter of dowel with different glue, PVAc and Epoxy can give
significant effect the (OPT), if these sizes and glue used are significant, it will
save the furniture production in terms of is cost. The testing result was analyzed
using SPSS. The result analyzed using ANOVA through Duncan's Multiple
Range Test (DMRT). The results shows that for both adhesive no significant
value for two testing. It was determined when P-value is > 0.05. According to
ANOVA, bending test Glue, recorded their P-value are P=0.167 for Maximum
Load (2.026) for the tensile P-value are P=0.137 for Maximum load (2.368). For
Dowel sizes bending test P-value are P=0.007 for Maximum Load (6.193),
P=0.009 for Tensile at Break and Maximum Load (5.851). Based on this result,
all dowel size has highly significant strength for all testing compare with
adhesive used PVAc and Epoxy not significant, from that used of PVAc on Tshape
joint is better because PVAc low price compare to the Epoxy |
| format |
Student Project |
| author |
Sheikh Osman, Sheikh Muhammad Shauqi Kamal |
| author_facet |
Sheikh Osman, Sheikh Muhammad Shauqi Kamal |
| author_sort |
Sheikh Osman, Sheikh Muhammad Shauqi Kamal |
| title |
Strength properties of single pin dowel joint
on oil palm lumber / Sheikh Muhammad Shauqi Kamal Sheikh Osman |
| title_short |
Strength properties of single pin dowel joint
on oil palm lumber / Sheikh Muhammad Shauqi Kamal Sheikh Osman |
| title_full |
Strength properties of single pin dowel joint
on oil palm lumber / Sheikh Muhammad Shauqi Kamal Sheikh Osman |
| title_fullStr |
Strength properties of single pin dowel joint
on oil palm lumber / Sheikh Muhammad Shauqi Kamal Sheikh Osman |
| title_full_unstemmed |
Strength properties of single pin dowel joint
on oil palm lumber / Sheikh Muhammad Shauqi Kamal Sheikh Osman |
| title_sort |
strength properties of single pin dowel joint
on oil palm lumber / sheikh muhammad shauqi kamal sheikh osman |
| publisher |
Faculty of Applied Sciences |
| publishDate |
2016 |
| url |
http://ir.uitm.edu.my/id/eprint/22621/ http://ir.uitm.edu.my/id/eprint/22621/1/PPb_SHEIKH%20MUHAMMAD%20SHAUQI%20KAMAL%20SHEIKH%20OSMAN%20AS%20C%2016_5.PDF |
| first_indexed |
2023-09-18T23:09:03Z |
| last_indexed |
2023-09-18T23:09:03Z |
| _version_ |
1777418679195009024 |