Finishing performance of acid catalyst (AC) lacquer on oil palm lumber / Nuramiratul Hakimah Badrul Nidzam
Finishing is the most important part of manufacturing furniture process. The benefits of finishing are to give protection and attractive appearance on product itself. The objective of this study was to determine the suitability of AC lacquer to be applied on OPL and to compare the effect of diffe...
| Main Author: | |
|---|---|
| Format: | Student Project |
| Language: | English |
| Published: |
Faculty of Applied Sciences
2016
|
| Subjects: | |
| Online Access: | http://ir.uitm.edu.my/id/eprint/22625/ http://ir.uitm.edu.my/id/eprint/22625/1/PPb_NURAMIRATUL%20HAKIMAH%20BADRUL%20NIDZAM%20AS%20C%2016_5.PDF |
| Summary: | Finishing is the most important part of manufacturing furniture process. The
benefits of finishing are to give protection and attractive appearance on product
itself. The objective of this study was to determine the suitability of AC lacquer to
be applied on OPL and to compare the effect of different finishing system layer
using AC lacquer on surface OPL. For system A, the processes of sealer were
repeated five times and topcoat will repeated four times. Meanwhile, for system
B, the processes of sealer were repeated four times and topcoats were repeated
two times. The coating material use in this study is acid catalyst lacquer. The
tests that will do household test, heat resistance test and pencil hardness test.
This study are used the ASTM and BS standard for the method and procedures.
The household and pencil hardness test for system A are gives a best result and
for heat resistance the result show no different between system A and system B.
For the best performance on OPL it can add more layers on finishing system on
OPL. |
|---|