Mechanical, physical and screw withdrawal properties of engineered wood structure / Nur Shafiqah Ahmad Rosli
Mechanical, Physical and Screw Withdrawal Properties of Engineered Wood Structure bounded with 12% urea formaldehyde added with hardener (Ammonium Chloride) has been studied. The board combination of laminated veneer lumber and particleboard were fabricated with three different sizes i.e <1 m...
| Main Author: | |
|---|---|
| Format: | Student Project |
| Language: | English |
| Published: |
Faculty of Applied Sciences
2016
|
| Subjects: | |
| Online Access: | http://ir.uitm.edu.my/id/eprint/22647/ http://ir.uitm.edu.my/id/eprint/22647/1/PPb_NUR%20SHAFIQAH%20AHMAD%20ROSLI%20AS%20C%2016_5.PDF |
| id |
uitm-22647 |
|---|---|
| recordtype |
eprints |
| spelling |
uitm-226472019-02-04T04:45:49Z http://ir.uitm.edu.my/id/eprint/22647/ Mechanical, physical and screw withdrawal properties of engineered wood structure / Nur Shafiqah Ahmad Rosli Ahmad Rosli, Nur Shafiqah Production management. Operations management Wood technology. Lumber Mechanical, Physical and Screw Withdrawal Properties of Engineered Wood Structure bounded with 12% urea formaldehyde added with hardener (Ammonium Chloride) has been studied. The board combination of laminated veneer lumber and particleboard were fabricated with three different sizes i.e <1 mm, >1mm and mixture from below and upper than 1mm. The boards produced was evaluated for its modulus of rupture(MOR), modulus of elasticity (MOE), internal bonding (IB), water absorption (WA), thickness swelling (TS) and Screw Withdrawal properties which is screw withdrawal (SW) in according with Malaysia Standard. The diameter of screw used in the study is 7mm while the thread angle is 30'. The screw withdrawal testing was made on two position which are the surface (Laminated Veneer Lumber) and edge (Particleboard). The study revealed that the >1mm shows the best screw withdrawal strength. The best orientation on face in laminated veneer lumber substrate compare to orientation on edge in particleboard substrate, for mechanical properties mixed particle size shows the best strength of bending strength, <1mm particle size has high internal bonding strength and for physical properties <1mm particle size is the best result compared to <1mm and mixed particle size. Faculty of Applied Sciences 2016 Student Project NonPeerReviewed text en http://ir.uitm.edu.my/id/eprint/22647/1/PPb_NUR%20SHAFIQAH%20AHMAD%20ROSLI%20AS%20C%2016_5.PDF Ahmad Rosli, Nur Shafiqah (2016) Mechanical, physical and screw withdrawal properties of engineered wood structure / Nur Shafiqah Ahmad Rosli. [Student Project] (Unpublished) |
| repository_type |
Digital Repository |
| institution_category |
Local University |
| institution |
Universiti Teknologi MARA |
| building |
UiTM Institutional Repository |
| collection |
Online Access |
| language |
English |
| topic |
Production management. Operations management Wood technology. Lumber |
| spellingShingle |
Production management. Operations management Wood technology. Lumber Ahmad Rosli, Nur Shafiqah Mechanical, physical and screw withdrawal properties of engineered wood structure / Nur Shafiqah Ahmad Rosli |
| description |
Mechanical, Physical and Screw Withdrawal Properties of Engineered
Wood Structure bounded with 12% urea formaldehyde added with
hardener (Ammonium Chloride) has been studied. The board combination
of laminated veneer lumber and particleboard were fabricated with three
different sizes i.e <1 mm, >1mm and mixture from below and upper than
1mm. The boards produced was evaluated for its modulus of
rupture(MOR), modulus of elasticity (MOE), internal bonding (IB), water
absorption (WA), thickness swelling (TS) and Screw Withdrawal properties
which is screw withdrawal (SW) in according with Malaysia Standard. The
diameter of screw used in the study is 7mm while the thread angle is 30'.
The screw withdrawal testing was made on two position which are the
surface (Laminated Veneer Lumber) and edge (Particleboard). The study
revealed that the >1mm shows the best screw withdrawal strength. The
best orientation on face in laminated veneer lumber substrate compare to
orientation on edge in particleboard substrate, for mechanical properties
mixed particle size shows the best strength of bending strength, <1mm
particle size has high internal bonding strength and for physical properties
<1mm particle size is the best result compared to <1mm and mixed
particle size. |
| format |
Student Project |
| author |
Ahmad Rosli, Nur Shafiqah |
| author_facet |
Ahmad Rosli, Nur Shafiqah |
| author_sort |
Ahmad Rosli, Nur Shafiqah |
| title |
Mechanical, physical and screw withdrawal properties of
engineered wood structure / Nur Shafiqah Ahmad Rosli |
| title_short |
Mechanical, physical and screw withdrawal properties of
engineered wood structure / Nur Shafiqah Ahmad Rosli |
| title_full |
Mechanical, physical and screw withdrawal properties of
engineered wood structure / Nur Shafiqah Ahmad Rosli |
| title_fullStr |
Mechanical, physical and screw withdrawal properties of
engineered wood structure / Nur Shafiqah Ahmad Rosli |
| title_full_unstemmed |
Mechanical, physical and screw withdrawal properties of
engineered wood structure / Nur Shafiqah Ahmad Rosli |
| title_sort |
mechanical, physical and screw withdrawal properties of
engineered wood structure / nur shafiqah ahmad rosli |
| publisher |
Faculty of Applied Sciences |
| publishDate |
2016 |
| url |
http://ir.uitm.edu.my/id/eprint/22647/ http://ir.uitm.edu.my/id/eprint/22647/1/PPb_NUR%20SHAFIQAH%20AHMAD%20ROSLI%20AS%20C%2016_5.PDF |
| first_indexed |
2023-09-18T23:09:07Z |
| last_indexed |
2023-09-18T23:09:07Z |
| _version_ |
1777418682988756992 |