The properties of three layer particleboard from oil palm fronds (elaeis guineensis) / Hammad Asyraf Abdul Rahman
Particleboard (PB) is a composite panel product consisting of cellulosic particles of various sizes that are bonded together with a synthetic resin or binder under heat and pressure. This study was undertaken is to determine the properties of three layer particleboard from oil palm fronds and to...
| Main Author: | |
|---|---|
| Format: | Student Project |
| Language: | English |
| Published: |
Faculty of Applied Sciences
2013
|
| Subjects: | |
| Online Access: | http://ir.uitm.edu.my/id/eprint/22810/ http://ir.uitm.edu.my/id/eprint/22810/1/PPb_HAMMAD%20ASYRAF%20ABDUL%20RAHMAN%20AS%20C%2013_5.PDF |
| Summary: | Particleboard (PB) is a composite panel product consisting of cellulosic particles of
various sizes that are bonded together with a synthetic resin or binder under heat and
pressure. This study was undertaken is to determine the properties of three layer
particleboard from oil palm fronds and to evaluate the properties of three layer
particleboard from oil palm fronds by using different particle sizes and resin content.
With that, this study use the oil palm fronds (OPF) because to reduce the wastage from
oil palm biomass and overcome shortage of the wood supply. Experimental three layer
PB panel. from OPF particles bonded with Phenol Formaldehyde (PF) Were produced
with two different particle sizes (mm); 0.5/1.0/0.5 and 1.0/2.0/1.0 and two different resin
content (%); 9/9/9 and 11/9/11. The results show the panels made with 0.5/1.0/0.5
particle size and 11/9/11 resin content showed better in MOR and MOE compare with
other. Internal bond of panel manufactured using 0.5/1.0/0.5 with 11/9/11 was higher
compare with panel manufactured using 1.0/2.0/1.0 with 9/9/9 and 11/9/11 resin content.
Thickness swelling rate were slightly lower for PB manufactured using 9/9/9 compare
11/9/11. |
|---|