Removal of Chromium (VI) and Lead (II) by using sawdust activated carbon as compared with commercial activated carbon / Norlina Hussin

The discharge of chromium (VI) and lead (II) into natural streams and rivers from the industries causes several health and environmental problems. Removal of chromium (VI) and lead (II) from aqueous solution by sawdust activated carbon as compared with commercial activated carbon was studied. In thi...

Full description

Bibliographic Details
Main Author: Hussin, Norlina
Format: Student Project
Language:English
Published: Faculty of Applied Sciences 2009
Subjects:
Online Access:http://ir.uitm.edu.my/id/eprint/23166/
http://ir.uitm.edu.my/id/eprint/23166/1/PPb_NORLINA%20HUSSIN%20AS%2009_5.pdf
id uitm-23166
recordtype eprints
spelling uitm-231662019-02-14T04:51:21Z http://ir.uitm.edu.my/id/eprint/23166/ Removal of Chromium (VI) and Lead (II) by using sawdust activated carbon as compared with commercial activated carbon / Norlina Hussin Hussin, Norlina Materials of engineering and construction The discharge of chromium (VI) and lead (II) into natural streams and rivers from the industries causes several health and environmental problems. Removal of chromium (VI) and lead (II) from aqueous solution by sawdust activated carbon as compared with commercial activated carbon was studied. In this study, sawdust has been treated with phosphoric acid to form activated carbon and used to remove chromium (VI) and lead (II). The application of it will reduce solid waste disposal problem and also minimize the cost of wastewater treatment. The optimum parameters that has been investigated are initial concentration, pH, adsorbent dose and contact time. Sawdust activated carbon has ability to remove Cr (VI) and Pb (II) from the aqueous solutions with the percentage removal is 60-80% for Cr (VI) and 90-100% for Pb (II). The maximum percentage removals were found at 2 ppm of aqueous initial concentration, pH 2 for chromium (VI) and pH 6 for lead (II). The result of this study also showed that, the optimum adsorbent dose of sawdust activated carbon was 2.4 g for the removal of Cr (VI) at 80 minutes while 1.6 g for the removal Pb (II) at 60 minutes. The removal of Cr (VI) and Pb (II) are more efficient by using commercial activated carbon compared with sawdust activated carbon due to its greater percentage removal but sawdust activated carbon can be considered as good adsorbent due to the sawdust that can be easily obtained and its low cost. Faculty of Applied Sciences 2009 Student Project NonPeerReviewed text en http://ir.uitm.edu.my/id/eprint/23166/1/PPb_NORLINA%20HUSSIN%20AS%2009_5.pdf Hussin, Norlina (2009) Removal of Chromium (VI) and Lead (II) by using sawdust activated carbon as compared with commercial activated carbon / Norlina Hussin. [Student Project] (Unpublished)
repository_type Digital Repository
institution_category Local University
institution Universiti Teknologi MARA
building UiTM Institutional Repository
collection Online Access
language English
topic Materials of engineering and construction
spellingShingle Materials of engineering and construction
Hussin, Norlina
Removal of Chromium (VI) and Lead (II) by using sawdust activated carbon as compared with commercial activated carbon / Norlina Hussin
description The discharge of chromium (VI) and lead (II) into natural streams and rivers from the industries causes several health and environmental problems. Removal of chromium (VI) and lead (II) from aqueous solution by sawdust activated carbon as compared with commercial activated carbon was studied. In this study, sawdust has been treated with phosphoric acid to form activated carbon and used to remove chromium (VI) and lead (II). The application of it will reduce solid waste disposal problem and also minimize the cost of wastewater treatment. The optimum parameters that has been investigated are initial concentration, pH, adsorbent dose and contact time. Sawdust activated carbon has ability to remove Cr (VI) and Pb (II) from the aqueous solutions with the percentage removal is 60-80% for Cr (VI) and 90-100% for Pb (II). The maximum percentage removals were found at 2 ppm of aqueous initial concentration, pH 2 for chromium (VI) and pH 6 for lead (II). The result of this study also showed that, the optimum adsorbent dose of sawdust activated carbon was 2.4 g for the removal of Cr (VI) at 80 minutes while 1.6 g for the removal Pb (II) at 60 minutes. The removal of Cr (VI) and Pb (II) are more efficient by using commercial activated carbon compared with sawdust activated carbon due to its greater percentage removal but sawdust activated carbon can be considered as good adsorbent due to the sawdust that can be easily obtained and its low cost.
format Student Project
author Hussin, Norlina
author_facet Hussin, Norlina
author_sort Hussin, Norlina
title Removal of Chromium (VI) and Lead (II) by using sawdust activated carbon as compared with commercial activated carbon / Norlina Hussin
title_short Removal of Chromium (VI) and Lead (II) by using sawdust activated carbon as compared with commercial activated carbon / Norlina Hussin
title_full Removal of Chromium (VI) and Lead (II) by using sawdust activated carbon as compared with commercial activated carbon / Norlina Hussin
title_fullStr Removal of Chromium (VI) and Lead (II) by using sawdust activated carbon as compared with commercial activated carbon / Norlina Hussin
title_full_unstemmed Removal of Chromium (VI) and Lead (II) by using sawdust activated carbon as compared with commercial activated carbon / Norlina Hussin
title_sort removal of chromium (vi) and lead (ii) by using sawdust activated carbon as compared with commercial activated carbon / norlina hussin
publisher Faculty of Applied Sciences
publishDate 2009
url http://ir.uitm.edu.my/id/eprint/23166/
http://ir.uitm.edu.my/id/eprint/23166/1/PPb_NORLINA%20HUSSIN%20AS%2009_5.pdf
first_indexed 2023-09-18T23:10:12Z
last_indexed 2023-09-18T23:10:12Z
_version_ 1777418751589744640