Differential pulse anodic stripping voltammetric (dpasv) technique for reactive black 5 analysis at glassy carbon electrode / Nur Aqilah Abdul Rahman

Dyes are generally defined as an aromatic organic compound which shows an affinity towards the substrate to which they are being applied. Dyes are used to give colour to fabrics. Hence, the amounts and contents of dyes that used in fabrics industry must be analyzed. The presence of dyes in wastew...

Full description

Bibliographic Details
Main Author: Abdul Rahman, Nur Aqilah
Format: Student Project
Language:English
Published: Faculty of Applied Sciences 2017
Subjects:
Online Access:http://ir.uitm.edu.my/id/eprint/24153/
http://ir.uitm.edu.my/id/eprint/24153/1/PPb_NUR%20AQILAH%20ABDUL%20RAHMAN%20AS%20C%2017_5.PDF
id uitm-24153
recordtype eprints
spelling uitm-241532019-05-10T06:54:37Z http://ir.uitm.edu.my/id/eprint/24153/ Differential pulse anodic stripping voltammetric (dpasv) technique for reactive black 5 analysis at glassy carbon electrode / Nur Aqilah Abdul Rahman Abdul Rahman, Nur Aqilah Aromatic compounds Dyes are generally defined as an aromatic organic compound which shows an affinity towards the substrate to which they are being applied. Dyes are used to give colour to fabrics. Hence, the amounts and contents of dyes that used in fabrics industry must be analyzed. The presence of dyes in wastewater samples at any level is not safe for human. Therefore, dyes analysis needs a sensitive, precise, rapid, accurate, simple and low cost analytical method for dyes determination. The differential pulse anodic stripping voltammetry (DPASV) technique using glassy carbon electrode (GeE) as a working electrode and phosphate buffer at pH 4.2 as a supporting electrolyte has been proposed to be developed. The experimental voltammetric parameters were optimized in order to obtain a maximum response with analytical validation of the technique. The optimum parameters were initial potential <Ei) = +0.3 V, end potential (Ef) = +1.0 V, scan rate (v) = 0.04 V/s, accumulation time (tacc) = 50 s, accumulation potential (Eacc) = 0.4 V and pulse amplitude = 0.075 V. The anodic peak was appeared at 0.77972 V. The curve was linear from 0.5 to 1.25 mg/L (R2=0.9986) with detection limit of 0.025 mg/L. The precisions in terms of relative standard deviation (RSD) were 0.08%, 0.62% and 0.50% for consecutive three days. The range recovery achieved for 0.5, 0.7 and 1.0 mg/L of RB5 standard solution in simulation dye sample was 104.40%, 89.71%, and 111.15% respectively. It can be concluded that the developed technique is precise, accurate, rugged, low cost, fast and has potential to be an alternative method for routine analysis of RB5 in stimulation dye sample. Faculty of Applied Sciences 2017 Student Project NonPeerReviewed text en http://ir.uitm.edu.my/id/eprint/24153/1/PPb_NUR%20AQILAH%20ABDUL%20RAHMAN%20AS%20C%2017_5.PDF Abdul Rahman, Nur Aqilah (2017) Differential pulse anodic stripping voltammetric (dpasv) technique for reactive black 5 analysis at glassy carbon electrode / Nur Aqilah Abdul Rahman. [Student Project] (Unpublished)
repository_type Digital Repository
institution_category Local University
institution Universiti Teknologi MARA
building UiTM Institutional Repository
collection Online Access
language English
topic Aromatic compounds
spellingShingle Aromatic compounds
Abdul Rahman, Nur Aqilah
Differential pulse anodic stripping voltammetric (dpasv) technique for reactive black 5 analysis at glassy carbon electrode / Nur Aqilah Abdul Rahman
description Dyes are generally defined as an aromatic organic compound which shows an affinity towards the substrate to which they are being applied. Dyes are used to give colour to fabrics. Hence, the amounts and contents of dyes that used in fabrics industry must be analyzed. The presence of dyes in wastewater samples at any level is not safe for human. Therefore, dyes analysis needs a sensitive, precise, rapid, accurate, simple and low cost analytical method for dyes determination. The differential pulse anodic stripping voltammetry (DPASV) technique using glassy carbon electrode (GeE) as a working electrode and phosphate buffer at pH 4.2 as a supporting electrolyte has been proposed to be developed. The experimental voltammetric parameters were optimized in order to obtain a maximum response with analytical validation of the technique. The optimum parameters were initial potential <Ei) = +0.3 V, end potential (Ef) = +1.0 V, scan rate (v) = 0.04 V/s, accumulation time (tacc) = 50 s, accumulation potential (Eacc) = 0.4 V and pulse amplitude = 0.075 V. The anodic peak was appeared at 0.77972 V. The curve was linear from 0.5 to 1.25 mg/L (R2=0.9986) with detection limit of 0.025 mg/L. The precisions in terms of relative standard deviation (RSD) were 0.08%, 0.62% and 0.50% for consecutive three days. The range recovery achieved for 0.5, 0.7 and 1.0 mg/L of RB5 standard solution in simulation dye sample was 104.40%, 89.71%, and 111.15% respectively. It can be concluded that the developed technique is precise, accurate, rugged, low cost, fast and has potential to be an alternative method for routine analysis of RB5 in stimulation dye sample.
format Student Project
author Abdul Rahman, Nur Aqilah
author_facet Abdul Rahman, Nur Aqilah
author_sort Abdul Rahman, Nur Aqilah
title Differential pulse anodic stripping voltammetric (dpasv) technique for reactive black 5 analysis at glassy carbon electrode / Nur Aqilah Abdul Rahman
title_short Differential pulse anodic stripping voltammetric (dpasv) technique for reactive black 5 analysis at glassy carbon electrode / Nur Aqilah Abdul Rahman
title_full Differential pulse anodic stripping voltammetric (dpasv) technique for reactive black 5 analysis at glassy carbon electrode / Nur Aqilah Abdul Rahman
title_fullStr Differential pulse anodic stripping voltammetric (dpasv) technique for reactive black 5 analysis at glassy carbon electrode / Nur Aqilah Abdul Rahman
title_full_unstemmed Differential pulse anodic stripping voltammetric (dpasv) technique for reactive black 5 analysis at glassy carbon electrode / Nur Aqilah Abdul Rahman
title_sort differential pulse anodic stripping voltammetric (dpasv) technique for reactive black 5 analysis at glassy carbon electrode / nur aqilah abdul rahman
publisher Faculty of Applied Sciences
publishDate 2017
url http://ir.uitm.edu.my/id/eprint/24153/
http://ir.uitm.edu.my/id/eprint/24153/1/PPb_NUR%20AQILAH%20ABDUL%20RAHMAN%20AS%20C%2017_5.PDF
first_indexed 2023-09-18T23:11:59Z
last_indexed 2023-09-18T23:11:59Z
_version_ 1777418863833513984