Proccessing cerate-zirconate nanopowder at supercritical conditions via batch-wise reactor system / Nafisah Osman and Mohd Azlan Mohd Ishak

Protonic conductors of ceramic perovskite-type oxides (ABO3) have captured attention of researchers worldwide for technological purpose in fuel cells, batteries, steam electrolyser, etc. The best candidate amongst them is the perovskite-type oxides of Ba(Ce,Zr)03 which is known to exhibit high mecha...

Full description

Bibliographic Details
Main Authors: Osman, Nafisah, Mohd Ishak, Mohd Azlan
Format: Research Reports
Language:English
Published: Research Management Institute (RMI) 2016
Subjects:
Online Access:http://ir.uitm.edu.my/id/eprint/26253/
http://ir.uitm.edu.my/id/eprint/26253/1/LP_NAFISAH%20OSMAN%20RMI%2016_5.pdf
id uitm-26253
recordtype eprints
spelling uitm-262532019-10-23T08:45:39Z http://ir.uitm.edu.my/id/eprint/26253/ Proccessing cerate-zirconate nanopowder at supercritical conditions via batch-wise reactor system / Nafisah Osman and Mohd Azlan Mohd Ishak Osman, Nafisah Mohd Ishak, Mohd Azlan Applications of electric power Electronics Protonic conductors of ceramic perovskite-type oxides (ABO3) have captured attention of researchers worldwide for technological purpose in fuel cells, batteries, steam electrolyser, etc. The best candidate amongst them is the perovskite-type oxides of Ba(Ce,Zr)03 which is known to exhibit high mechanical and chemical stability along with good conductivity. This proton conductor is the best applicant as electrolyte for solid oxide fuel cells (SOFC) in the presence of hydrogen and/or water vapour at intermediate temperatures (400-750 °C) There are very limited information available regarding the durability of cells based on the cerate-zirconate, for example, Y-doped Ba(Ce,Zr)03 electrolyte. Indeed, synthesizing cerate-zirconate electrolyte especially supercritical fluid method is a critical challenge as previous report has found that only 2-3 metal element can be obtained a single perovskite phase. However, to the best of our knowledge this route has not yet been carried out to synthesize ceramics compounds with four metal elements In the presence work, high-pressure-high-temperature (HP-HT) batch-wise reactor system was used to synthesise BaCeo.54Zro.36Y01O2.95 (BCZY) perovskite powder using different parameter such as reaction pressure, reaction temperature and solvent as SCF media. Considering the advantages of Wet Chemical Method (WCMs) and SCF properties, an approach towards the combination of both synthesis routes was used in this work. BCZY was synthesise by sol-gel assisted supercritical fluid method using different heating proceses. The phase formation was studied to investigate the formation of any secondary using X-ray diffractometer (XRD). Research Management Institute (RMI) 2016 Research Reports NonPeerReviewed text en http://ir.uitm.edu.my/id/eprint/26253/1/LP_NAFISAH%20OSMAN%20RMI%2016_5.pdf Osman, Nafisah and Mohd Ishak, Mohd Azlan (2016) Proccessing cerate-zirconate nanopowder at supercritical conditions via batch-wise reactor system / Nafisah Osman and Mohd Azlan Mohd Ishak. [Research Reports] (Unpublished)
repository_type Digital Repository
institution_category Local University
institution Universiti Teknologi MARA
building UiTM Institutional Repository
collection Online Access
language English
topic Applications of electric power
Electronics
spellingShingle Applications of electric power
Electronics
Osman, Nafisah
Mohd Ishak, Mohd Azlan
Proccessing cerate-zirconate nanopowder at supercritical conditions via batch-wise reactor system / Nafisah Osman and Mohd Azlan Mohd Ishak
description Protonic conductors of ceramic perovskite-type oxides (ABO3) have captured attention of researchers worldwide for technological purpose in fuel cells, batteries, steam electrolyser, etc. The best candidate amongst them is the perovskite-type oxides of Ba(Ce,Zr)03 which is known to exhibit high mechanical and chemical stability along with good conductivity. This proton conductor is the best applicant as electrolyte for solid oxide fuel cells (SOFC) in the presence of hydrogen and/or water vapour at intermediate temperatures (400-750 °C) There are very limited information available regarding the durability of cells based on the cerate-zirconate, for example, Y-doped Ba(Ce,Zr)03 electrolyte. Indeed, synthesizing cerate-zirconate electrolyte especially supercritical fluid method is a critical challenge as previous report has found that only 2-3 metal element can be obtained a single perovskite phase. However, to the best of our knowledge this route has not yet been carried out to synthesize ceramics compounds with four metal elements In the presence work, high-pressure-high-temperature (HP-HT) batch-wise reactor system was used to synthesise BaCeo.54Zro.36Y01O2.95 (BCZY) perovskite powder using different parameter such as reaction pressure, reaction temperature and solvent as SCF media. Considering the advantages of Wet Chemical Method (WCMs) and SCF properties, an approach towards the combination of both synthesis routes was used in this work. BCZY was synthesise by sol-gel assisted supercritical fluid method using different heating proceses. The phase formation was studied to investigate the formation of any secondary using X-ray diffractometer (XRD).
format Research Reports
author Osman, Nafisah
Mohd Ishak, Mohd Azlan
author_facet Osman, Nafisah
Mohd Ishak, Mohd Azlan
author_sort Osman, Nafisah
title Proccessing cerate-zirconate nanopowder at supercritical conditions via batch-wise reactor system / Nafisah Osman and Mohd Azlan Mohd Ishak
title_short Proccessing cerate-zirconate nanopowder at supercritical conditions via batch-wise reactor system / Nafisah Osman and Mohd Azlan Mohd Ishak
title_full Proccessing cerate-zirconate nanopowder at supercritical conditions via batch-wise reactor system / Nafisah Osman and Mohd Azlan Mohd Ishak
title_fullStr Proccessing cerate-zirconate nanopowder at supercritical conditions via batch-wise reactor system / Nafisah Osman and Mohd Azlan Mohd Ishak
title_full_unstemmed Proccessing cerate-zirconate nanopowder at supercritical conditions via batch-wise reactor system / Nafisah Osman and Mohd Azlan Mohd Ishak
title_sort proccessing cerate-zirconate nanopowder at supercritical conditions via batch-wise reactor system / nafisah osman and mohd azlan mohd ishak
publisher Research Management Institute (RMI)
publishDate 2016
url http://ir.uitm.edu.my/id/eprint/26253/
http://ir.uitm.edu.my/id/eprint/26253/1/LP_NAFISAH%20OSMAN%20RMI%2016_5.pdf
first_indexed 2023-09-18T23:16:30Z
last_indexed 2023-09-18T23:16:30Z
_version_ 1777419147723931648