Investigate on welding distortion, residual stress and metallurgical behavior using fem and experimental study / Mohd Ridhwan Mohammed Redza

This study sets out to investigate the distortion, residual stress and metallurgical behavior o f low carbon steel due to single-pass and multipass GMAW process using finite element method (FEM). There are various cases studies were conducted started with the basic welding structure of butt joint wh...

Full description

Bibliographic Details
Main Author:	Mohammed Redza, Mohd Ridhwan
Format:	Thesis
Language:	English
Published:	2016
Subjects:	Welding
Online Access:	http://ir.uitm.edu.my/id/eprint/27405/ http://ir.uitm.edu.my/id/eprint/27405/1/TM_MOHD%20RIDHWAN%20MOHAMMED%20REDZA%20EM%2016_5.pdf

id	uitm-27405
recordtype	eprints
spelling	uitm-274052020-01-21T01:40:34Z http://ir.uitm.edu.my/id/eprint/27405/ Investigate on welding distortion, residual stress and metallurgical behavior using fem and experimental study / Mohd Ridhwan Mohammed Redza Mohammed Redza, Mohd Ridhwan Welding This study sets out to investigate the distortion, residual stress and metallurgical behavior o f low carbon steel due to single-pass and multipass GMAW process using finite element method (FEM). There are various cases studies were conducted started with the basic welding structure of butt joint which is divided into four (4) major case studies, which are (1) distortion analysis compared with analytical calculation FEM and experimental study on butt joint, (2) metallurgical behavior analysis on butt joint, (3) residual stress estimation analysis o f butt joint using analytical method.A welding simulation was created using FE commercial software package SYSWELD 2010 and Weld Planner 2010 with the capabilities to geometry welding processes. However, in the simulation study, the FEA commercial software was employed to predict welding distortion, residual stress and metallurgical behavior in butt joint weld o f low carbon steel with thicknesses of 4 mm, 6 mm and 9 mm. It was found out that, the 2D multipass analysis could be employed to obtain the fast average result o f angular distortion while 3D multipass analysis to produce more accurate and complete results. For verification purpose, a series o f experiments were performed to measure the weld. Therefore, the experimental works were conducted by using GMAW fully automated robotic welding process. By comparing the results, It can be summarized that the 3D analysis, simulation shows reasonable agreement and good correlation with experiments, except in 2D analysis on geometry. This result o f the study indicates that the simulation study is a reliable tool in predicting the welding induced on the particular geometry and welding joint in this study. The effects o f the clamping and welding sequence on distortion were also investigated in this study, and it was found out that the clamping condition and the welding sequences play a considerable factor in distortion, residual stress and metallurgical behavior. 2016 Thesis NonPeerReviewed text en http://ir.uitm.edu.my/id/eprint/27405/1/TM_MOHD%20RIDHWAN%20MOHAMMED%20REDZA%20EM%2016_5.pdf Mohammed Redza, Mohd Ridhwan (2016) Investigate on welding distortion, residual stress and metallurgical behavior using fem and experimental study / Mohd Ridhwan Mohammed Redza. Masters thesis, Universiti Teknologi MARA.
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Teknologi MARA
building	UiTM Institutional Repository
collection	Online Access
language	English
topic	Welding
spellingShingle	Welding Mohammed Redza, Mohd Ridhwan Investigate on welding distortion, residual stress and metallurgical behavior using fem and experimental study / Mohd Ridhwan Mohammed Redza
description	This study sets out to investigate the distortion, residual stress and metallurgical behavior o f low carbon steel due to single-pass and multipass GMAW process using finite element method (FEM). There are various cases studies were conducted started with the basic welding structure of butt joint which is divided into four (4) major case studies, which are (1) distortion analysis compared with analytical calculation FEM and experimental study on butt joint, (2) metallurgical behavior analysis on butt joint, (3) residual stress estimation analysis o f butt joint using analytical method.A welding simulation was created using FE commercial software package SYSWELD 2010 and Weld Planner 2010 with the capabilities to geometry welding processes. However, in the simulation study, the FEA commercial software was employed to predict welding distortion, residual stress and metallurgical behavior in butt joint weld o f low carbon steel with thicknesses of 4 mm, 6 mm and 9 mm. It was found out that, the 2D multipass analysis could be employed to obtain the fast average result o f angular distortion while 3D multipass analysis to produce more accurate and complete results. For verification purpose, a series o f experiments were performed to measure the weld. Therefore, the experimental works were conducted by using GMAW fully automated robotic welding process. By comparing the results, It can be summarized that the 3D analysis, simulation shows reasonable agreement and good correlation with experiments, except in 2D analysis on geometry. This result o f the study indicates that the simulation study is a reliable tool in predicting the welding induced on the particular geometry and welding joint in this study. The effects o f the clamping and welding sequence on distortion were also investigated in this study, and it was found out that the clamping condition and the welding sequences play a considerable factor in distortion, residual stress and metallurgical behavior.
format	Thesis
author	Mohammed Redza, Mohd Ridhwan
author_facet	Mohammed Redza, Mohd Ridhwan
author_sort	Mohammed Redza, Mohd Ridhwan
title	Investigate on welding distortion, residual stress and metallurgical behavior using fem and experimental study / Mohd Ridhwan Mohammed Redza
title_short	Investigate on welding distortion, residual stress and metallurgical behavior using fem and experimental study / Mohd Ridhwan Mohammed Redza
title_full	Investigate on welding distortion, residual stress and metallurgical behavior using fem and experimental study / Mohd Ridhwan Mohammed Redza
title_fullStr	Investigate on welding distortion, residual stress and metallurgical behavior using fem and experimental study / Mohd Ridhwan Mohammed Redza
title_full_unstemmed	Investigate on welding distortion, residual stress and metallurgical behavior using fem and experimental study / Mohd Ridhwan Mohammed Redza
title_sort	investigate on welding distortion, residual stress and metallurgical behavior using fem and experimental study / mohd ridhwan mohammed redza
publishDate	2016
url	http://ir.uitm.edu.my/id/eprint/27405/ http://ir.uitm.edu.my/id/eprint/27405/1/TM_MOHD%20RIDHWAN%20MOHAMMED%20REDZA%20EM%2016_5.pdf
first_indexed	2023-09-18T23:18:24Z
last_indexed	2023-09-18T23:18:24Z
_version_	1777419266659713024

Investigate on welding distortion, residual stress and metallurgical behavior using fem and experimental study / Mohd Ridhwan Mohammed Redza

Similar Items