Kesan penuaan sesuhu terhadap sifat mikro kekerasan pempaterian Sn-Ag-Cu/CNT/Cu menggunakan pelekukan nano

Kesan penuaan sesuhu terhadap sifat mikro kekerasan pempaterian Sn-Ag-Cu/CNT/Cu menggunakan pelekukan nano

Kesan penuaan terma terhadap sifat kekerasan sambungan pateri Sn-3.0Ag-0.5Cu (SAC305) yang ditambah dengan partikel karbon tiub nano (CNT) telah dikaji. Sifat kekerasan yang menggambarkan kekuatan sambungan pateri ditentukan melalui pendekatan pelekukan nano. Bahan pateri SAC ditambah dengan 0.03% k...

Full description

Bibliographic Details
Main Authors:	Norliza Ismail, Azman Jalar, Maria Abu Bakar, Roslina Ismail, Nur Shafiqa Safee, Ahmad Ghadafi Ismail, Najib Saedi Ibrahim
Format:	Article
Language:	English
Published:	Penerbit Universiti Kebangsaan Malaysia 2019
Online Access:	http://journalarticle.ukm.my/13719/ http://journalarticle.ukm.my/13719/ http://journalarticle.ukm.my/13719/1/14%20Norliza%20Ismail.pdf

Similar Items

Kesan penambahan tiubnano karbon terhadap pertumbuhan lapisan sebatian antara logam sistem pateri Sn-Ag-Cu/Cu akibat penuaan terma
by: Norliza Ismail,, et al.
Published: (2018)

A review on mechanical properties of SnAgCu/Cu joint using laser soldering
by: Nabila, Tamar Jaya, et al.
Published: (2018)

Kesan pigmen pewarna terhadap pertumbuhan sebatian antara logam sambungan pateri Sn-3.0Ag-0.5Cu
by: Azman Jalar,, et al.
Published: (2018)

Cu6 Sn5 and Cu3 Sn intermetallics study in the Sn-40Pb/Cu system during long-term aging / Ramani Mayappan and Zainal Arifin Ahmad
by: Mayappan, Ramani, et al.
Published: (2010)

Effect of heat treatment temperature on SN-0.7CU solders material on microstructure
by: Nabhan, Ismail
Published: (2007)

Effects of Cooling Rates on Microstructure, Wettability and Strength of Sn3.8Ag0.7Cu Solder Alloy
by: Siti Rabiatull Aisha, Idris, et al.
Published: (2017)

Effect of Nickel Addition into Sn-3Ag-0.5Cu on Intermetallic Compound Formation during Soldering on Copper
by: Siti Rabiatull Aisha, Idris, et al.
Published: (2012)

Effect of Nickel Addition into Sn-3Ag-0.5Cu on Intermetallic Compound Formation during Soldering on Copper
by: Siti Rabiatull Aisha, Idris, et al.
Published: (2012)

Synthesis and modelling of the mechanical properties of Ag, Au and Cu nanowires
by: Nurul Akmal, Che Lah, et al.
Published: (2019)

Intermetallic Evolution for Isothermal Aging up to 2000 Hours on Sn-4Ag-0.5Cu and Sn-37Pb Solders with Ni/Au Layers
by: Azmah Hanim, Mohamad Ariff, et al.
Published: (2013)

Intermetallic Evolution for Isothermal Aging Up To 2000hours on Sn-4ag-0.5cu and Sn-37pb Solders with Ni/Au Layers
by: Siti Rabiatull Aisha, Idris, et al.
Published: (2013)

Progressive damage in Sn-4Ag-0.5Cu solder joints during flexural fatigue of a BGA package
by: Shaffiar, Norhashimah, et al.
Published: (2010)

Deposition and characterization of SnSe and CuInSe2 thin films by thermal evaporation technique from synthesized SnSe and CuInSe2 sources
by: Nordin Sabli,, et al.
Published: (2014)

Effect of Nickel addition on Intermetallic Compound Properties of Sn-Cu Solder Alloy
by: Zetty Akhtar, Abd Malek, et al.
Published: (2014)

Effects of Sintering Temperatures on Microstructures and Mechanical Properties of Sn4.0Ag0.5Cu1.0Ni Solder Alloy
by: Siti Rabiatull Aisha, Idris, et al.
Published: (2016)

Studies on intermetallics and physical properties of Sn-3.5Ag-1.0Cu lead free solder with Zn additive / Iziana Yahya
by: Yahya, Iziana
Published: (2016)

Thermal Cyclic Test for Sn-4Ag-0.5Cu Solders on High P Ni/Au and Ni/Pd/Au Surface Finishes
by: Siti Rabiatull Aisha, Idris, et al.
Published: (2015)

Thermal Cyclic Test For Sn-4Ag-0.5Cu Solders On High P Ni/Au AND Ni/Pd/Au Surface Finishes
by: Azmah Hanim, Mohamad Ariff, et al.
Published: (2015)

Kesan gelombang kejutan terhadap sifat mikromekanik sambungan pateri SAC 0307/ENiG menggunakan pendekatan pelekukan nano
by: Maria Abu Bakar,, et al.
Published: (2019)

Kekerasan terhadap wanita
by: WANRAZUHAR
Published: (1990)

Proses penuaan
by: Jasiman Ahmad
Published: (2006)

Intermetallic thickness and physical studies of Sn-3.5Ag-1.0Cu lead free solder with ni addition / Noor Asikin Ab Ghani
by: Ab Ghani, Noor Asikin
Published: (2016)

The Flexural Strength Prediction of Porous Cu-Sn-Ti Composites via Artificial Neural Networks
by: El Sawy, Abdelrahman, et al.
Published: (2018)

Microstructure, hardness and superconducting properties of Ag added ErBa2Cu307-δ
by: Ahmad Kamal Yahya,, et al.
Published: (2000)

Kekerasan dalam sejarah mesyuarat dan pemerintah
by: Qasim Ahmad
Published: (1993)

RF parameters characterization of a flexible Cu-PDMS-Cu patch antenna
by: Mohd Ramly, Athirah, et al.
Published: (2017)

Kesan kemasan permukaan berbeza terhadap sifat mikromekanik sambungan pateri Sac 0307 menggunakan pendekatan pelekukan nano
by: Maria Abu Bakar,, et al.
Published: (2018)

Effect of nickel doping into solder alloy and its strength between SnCu-Ni/immersion gold joint
by: Zetty Akhtar, Abd Malek
Published: (2017)

Reduction of Cd(II), Ag(II) AND Cu(II) Using Rubber Seed Shell : Adsorption Isotherm and Kinetics
by: Hajar Athirah, Mohd Sukri
Published: (2013)

Effects of annealing temperature on the optical properties and device performance of Ag / n-Si / CuPc / Ag solar cell prepared via spin coating method
by: HanashriahHassan,, et al.
Published: (2010)

Role of mechanical alloying parameters on powders distribution of Al/Cu alloy and Al/Cu composite
by: Jamal, N. A., et al.
Published: (2014)

Environment-modulated crystallization of Cu2O and CuO nanowires by electrospinning and their charge storage properties
by: Harilal, Midhun, et al.
Published: (2018)

Joint solder of lead free solder (Sn0.7Cu) and prrinted circuit board with various heat treatment temperatures.
by: Ariff Syakirin, Ghazalli
Published: (2007)

Prinsip pengajaran mikro
by: Omardin Ashaari
Published: (1997)

Cu and Cd bioaccumulation in Malaysian horseshoe crab
by: Megat, Aqilah, et al.
Published: (2011)

The waste recycling of copper phthalocyanine (CuPC)
by: Mohd Shazufarizal Zuhri, Zainal
Published: (2012)

Is the high cu tolerance of trichoderma atroviride isolated from the cu-polluted sediment due to adaptation?: an in vitro toxicological study
by: Yap, C.K, et al.
Published: (2011)

VIS-NIR spectral and particles distribution of Au, Ag, Cu, Al and Ni nanoparticles synthesized in distilled water using laser ablation
by: Mas Ira Syafila, Mohd Hilmi Tan, et al.
Published: (2019)

Resistive switching of Cu/Cu2O junction fabricated using simple thermal oxidation at 423 K for memristor application
by: Ani, Mohd Hanafi, et al.
Published: (2018)

Mencegah & merawat obesiti, impotensi dan penuaan
by: Wan Jamaluddin Syukur
Published: (2004)