A simple automated system for hall effect measurements
This project deals with the development of a computer interfacing technique for the study of Hall effect. A stepper motor with resolution of 0.1 mm was used to move a pair of permanent magnet backward and forward against the sample. The General Purpose Interface Bus (GPIB) card together with a digit...
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Universiti Kebangsaan Malaysia
2012
|
| Online Access: | http://journalarticle.ukm.my/4475/ http://journalarticle.ukm.my/4475/ http://journalarticle.ukm.my/4475/1/13%2520Ariffin.pdf |
| Summary: | This project deals with the development of a computer interfacing technique for the study of Hall effect. A stepper motor with resolution of 0.1 mm was used to move a pair of permanent magnet backward and forward against the sample. The General Purpose Interface Bus (GPIB) card together with a digital nanovoltmeter and teslameter using serial port siri RS232, interface were used to measure the potential difference and magnetic field strength, respectively. Hall effect for YBa2Cu3-xTixO7-δ system (x=0.00, 0.01, 0.03 and 0.05) showed positive sign Hall coefficient showing that the material is a hole type carrier at room temperature. Parameters such as Hall coefficient and charge carrier concentration were also display on the front panel of Lab View programming |
|---|